Elucidating the Bulk Morphology of Cellulose-Based Conducting Aerogels with X-Ray Microtomography

Conducting cellulose composites are promising sustainable functional materials that have found application in energy devices, sensing and water purification. Herein, conducting aerogels are fabricated based on nanofibrillated cellulose and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate, using the ice templating technique, and their bulk morphology is characterized with X-ray microtomography. The freezing method (-20 degrees C in a freezer vs liquid nitrogen) does not impact the mean porosity of the aerogels but the liquid-N2 aerogels have smaller pores. The integration of carbon fibers as addressing electrodes prior to freezing results in increased mean porosity and pore size in the liquid-N2 aerogels signifying that the carbon fibers alter the morphology of the aerogels when the freezing is fast. Spatially resolved porosity and pore size distributions also reveal that the liquid-N2 aerogels are more inhomogeneous. Independent of the freezing method, the aerogels have similar electrochemical properties. For aerogels without carbon fibers, freezer-aerogels have higher compression modulus and are less stable under cycling compression fatigue test. This can be explained by higher porosity with larger pores in the center of liquid-N2 aerogels and thinner pore walls. This work demonstrates that micro-CT is a powerful tool for characterizing the morphology of aerogels in a non-destructive and spatially resolved manner.Conducting aerogels based on nanofibrillated cellulose and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate are fabricated with the ice templating technique and their bulk morphology is characterized in a spatially resolved manner with X-ray microtomography. The effect of the freezing temperature and the integration of carbon fibers electrodes prior to freezing on the morphology, mechanical, and electrochemical properties is examined.imag

eSoil: A low-power bioelectronic growth scaffold that enhances crop seedling growth

Active hydroponic substrates that stimulate on demand the plant growth have not been demonstrated so far. Here, we developed the eSoil, a low- power bioelectronic growth scaffold that can provide electrical stimulation to the plants’ root system and growth environment in hydroponics settings. eSoil’s active material is an organic mixed ionic electronic conductor while its main structural component is cellulose, the most abundant biopolymer. We demonstrate that barley seedlings that are widely used for fodder grow within the eSoil with the root system integrated within its porous matrix. Simply by polarizing the eSoil, seedling growth is accelerated resulting in increase of dry weight on average by 50% after 15 d of growth. The effect is evident both on root and shoot development and occurs during the growth period after the stimulation. The stimulated plants reduce and assimilate NO3− more efficiently than controls, a finding that may have implications on minimizing fertilizer use. However, more studies are required to provide a mechanistic understanding of the physical and biological processes involved. eSoil opens the pathway for the development of active hydroponic scaffolds that may increase crop yield in a sustainable manner

La compréhension et l amélioration du transport ionique dans les polymères conducteurs

De nombreux dispositifs pour l électronique organique et la bioélectronique reposent sur le transport mixte (électronique et ionique).Le transport électronique dans les matériaux organique est relativement bien compris, mais une compréhension fondamentale du transport des ions est manquante. J'ai développé un modèle analytique qui décrit le transport d'ions dans une jonction planaire entre un électrolyte et un film de polymère conducteur.Le modèle permet des prédictions de l'évolution temporelle du courant et du drift length des ions.Ces prédictions sont validées par des simulations numériques et en utilisant des paramètres réalistes, je montre que le modèle analytique peut être utilisé pour obtenir la mobilité des ions dans le film. De plus, j'ai développé une méthode expérimentale qui permet l'application du modèle analytique et conduit à une estimation de la mobilité des ions dans les polymères conducteurs. Le PEDOT:PSS offre un transport efficace pour les ions, qui peut être mis en relation avec le gonflement important du film dans l'eau. Je montre que la réticulation du film diminue son gonflement ainsi que la mobilité des ions. Comprendre la forte corrélation entre l'hydratation et la conductivité ionique nous permet de développer des matériaux à mobilité ionique définie et importante. A titre d'exemple, le réglage de la mobilité ionique du PEDOT:TOS est présenté en ajustant le rapport relatif de la phase hygroscopique. Pour finir, j'ai effectué des mesures de spectroscopie d'impédance électrochimique au cours d'une expérience de moving front, afin de proposer une interprétation physique des spectres d'impédance mesurés à une jonction polymère conducteur/électrolyteMany organic electronic and bioelectronics devices rely on mixed (electronic and ionic) transport within a single organic layer. Although electronic transport in these materials is relatively well understood, a fundamental understanding of ion transport is missing. I developed a simple analytical model that describes ion transport in a planar junction between an electrolyte and a conducting polymer film. The model leads to predictions of the temporal evolution of drift length of ions and current. These predictions are validated by numerical simulations and by using realistic parameters, I show that the analytical model can be used to obtain the ion mobility in the film. Furthermore, I developed an experimental method which allows the application of the analytical model and leads to a straightforward estimation of the ion drift mobilities in conducting polymers. PEDOT:PSS was found to support efficient transport of common ions, consistent with extensive swelling of the film in water. Crosslinking the film decreased its swelling and the ion mobility. Understanding the high correlation of hydration and ionic conductivity enables us to engineer materials with high and defined ion mobilities. As an example tuning of ion mobility by adjusting the relative ratio of the hydroscopic phase to PEDOT:TOS is presented. Finally I performed electrochemical impedance spectroscopy during a moving front experiment, in order to give a physical interpretation of the impedance spectra at a conducting polymer/electrolyte junction.ST ETIENNE-ENS des Mines (422182304) / SudocSudocFranceF

Porous anodic alumina on galvanically grown PtSi layer for application in template-assisted Si nanowire growth

We report on the fabrication and morphology/structural characterization of a porous anodic alumina (PAA)/PtSi nano-template for use as matrix in template-assisted Si nanowire growth on a Si substrate. The PtSi layer was formed by electroless deposition from an aqueous solution containing the metal salt and HF, while the PAA membrane by anodizing an Al film deposited on the PtSi layer. The morphology and structure of the PtSi layer and of the alumina membrane on top were studied by Scanning and High Resolution Transmission Electron Microscopies (SEM, HRTEM). Cross sectional HRTEM images combined with electron diffraction (ED) were used to characterize the different interfaces between Si, PtSi and porous anodic alumina

Benchmarking organic electrochemical transistors for plant electrophysiology

Plants are able to sense and respond to a myriad of external stimuli, using different signal transduction pathways, including electrical signaling. The ability to monitor plant responses is essential not only for fundamental plant science, but also to gain knowledge on how to interface plants with technology. Still, the field of plant electrophysiology remains rather unexplored when compared to its animal counterpart. Indeed, most studies continue to rely on invasive techniques or on bulky inorganic electrodes that oftentimes are not ideal for stable integration with plant tissues. On the other hand, few studies have proposed novel approaches to monitor plant signals, based on non-invasive conformable electrodes or even organic transistors. Organic electrochemical transistors (OECTs) are particularly promising for electrophysiology as they are inherently amplification devices, they operate at low voltages, can be miniaturized, and be fabricated in flexible and conformable substrates. Thus, in this study, we characterize OECTs as viable tools to measure plant electrical signals, comparing them to the performance of the current standard, Ag/AgCl electrodes. For that, we focused on two widely studied plant signals: the Venus flytrap (VFT) action potentials elicited by mechanical stimulation of its sensitive trigger hairs, and the wound response of Arabidopsis thaliana. We found that OECTs are able to record these signals without distortion and with the same resolution as Ag/AgCl electrodes and that they offer a major advantage in terms of signal noise, which allow them to be used in field conditions. This work establishes these organic bioelectronic devices as non-invasive tools to monitor plant signaling that can provide insight into plant processes in their natural environment

Biohybrid plants with electronic roots via in vivo polymerization of conjugated oligomers

Plant processes, ranging from photosynthesis through production of biomaterials to environmental sensing and adaptation, can be used in technology via integration of functional materials and devices. Previously, plants with integrated organic electronic devices and circuits distributed in their vascular tissue and organs have been demonstrated. To circumvent biological barriers, and thereby access the internal tissue, plant cuttings were used, which resulted in biohybrids with limited lifetime and use. Here, we report intact plants with electronic functionality that continue to grow and develop enabling plant-biohybrid systems that fully maintain their biological processes. The biocatalytic machinery of the plant cell wall was leveraged to seamlessly integrate conductors with mixed ionic-electronic conductivity along the root system of the plants. Cell wall peroxidases catalyzed ETE-S polymerization while the plant tissue served as the template, organizing the polymer in a favorable manner. The conductivity of the resulting p(ETE-S) roots reached the order of 10 S cm(-1) and remained stable over the course of 4 weeks while the roots continued to grow. The p(ETE-S) roots were used to build supercapacitors that outperform previous plant-biohybrid charge storage demonstrations. Plants were not affected by the electronic functionalization but adapted to this new hybrid state by developing a more complex root system. Biohybrid plants with electronic roots pave the way for autonomous systems with potential applications in energy, sensing and robotics

Chitosan-Modified Polyethyleneimine Nanoparticles for Enhancing the Carboxylation Reaction and Plants' CO2 Uptake

Increasing plants' photosynthetic efficienc y is a major challenge that must be addressed in order to cover the food demands of the growing population in the changing climate. Photosynthes i s is greatly limited at the initial carboxylation reaction, where CO2 is converted to the organic acid 3-PGA, catalyzed by the RuBisCO enzyme. RuBisCO has poor affinity for CO2, but also the CO2 concentration at the RuBisCO site is limited by the diffusion of atmospheric CO2 through the various leaf compartments to the reaction site. Beyond genetic engineer-ing, nanotechnology can offer a materials-based approach for enhancing photosynthesis, and yet, it has mostly been explored for the light-dependent reactions. In this work, we developed polyethyleneimine-based nanoparticl e s for enhancing the carbox-ylation reaction. We demonstrate that the nanoparticles can capture CO2 in the form of bicarbonate and increase the CO2 that reacts with the RuBisCO enzyme, enhancing the 3-PGA production in in vitro assays by 20%. The nanoparticles can be introduced to the plant via leaf infiltration and, because of the functionalization with chitosan oligomers, they do not induce any toxic effect to the plant. In the leaves, the nanoparticles localize in the apoplastic space but also spontaneously reach the chloroplasts where photosynthetic activity takes place. Their CO2 loading-dependent fluorescence verifies that, in vivo, they maintain their abi l i t y to capture CO2 and can be therefore reloaded with atmospheric CO2 while in planta. Our results contribute to the development of a nanomaterials-based CO2-concentrating mechanism in plants t h a t can potentially increase photosynthetic efficiency and overall plants' CO2 storage

Spatial-temporal Distribution of Mosquito Larval Hot Spots in Papoli, Uganda: A Community-Based Approach to Mosquito Control

Mosquito species of the Anopheles gambaie complex are the predominant vectors of malaria transmission throughout sub-Saharan Africa. These mosquitoes tend to be endophilic, as well as anthropophilic, making them prime candidates for disease transmission. Within the same region, related mosquito vectors play a significant role in the transmission of additional human and zoonotic diseases. Furthermore, mosquito nuisance biting is an immense issue that cannot be ignored in terms of its impact on African communities. Depending on the respective factors involved, mosquito control programs throughout the continent have attempted to tackle these issues in a multitude of ways. This research approached the issue by developing and integrating an American-style mosquito control district within the eastern Ugandan community of Papoli. The basic structure of such a district was blended with a community-based approach, employing local community members and leaders, thus ensuring an effective and sustainable program. A guide detailing all aspects and steps needed to properly develop and implement such a program is outlined

Современные исследования по социальной истории Беларуси (по материалам исторической научной периодики 1991–2014 гг.)

Материалы XI Междунар. науч. конф. студентов, аспирантов и молодых ученых, Гомель, 17-18 мая 2018 г

La compréhension et l’amélioration du transport ionique dans les polymères conducteurs

Many organic electronic and bioelectronics devices rely on mixed (electronic and ionic) transport within a single organic layer. Although electronic transport in these materials is relatively well understood, a fundamental understanding of ion transport is missing. I developed a simple analytical model that describes ion transport in a planar junction between an electrolyte and a conducting polymer film. The model leads to predictions of the temporal evolution of drift length of ions and current. These predictions are validated by numerical simulations and by using realistic parameters, I show that the analytical model can be used to obtain the ion mobility in the film. Furthermore, I developed an experimental method which allows the application of the analytical model and leads to a straightforward estimation of the ion drift mobilities in conducting polymers. PEDOT:PSS was found to support efficient transport of common ions, consistent with extensive swelling of the film in water. Crosslinking the film decreased its swelling and the ion mobility. Understanding the high correlation of hydration and ionic conductivity enables us to engineer materials with high and defined ion mobilities. As an example tuning of ion mobility by adjusting the relative ratio of the hydroscopic phase to PEDOT:TOS is presented. Finally I performed electrochemical impedance spectroscopy during a moving front experiment, in order to give a physical interpretation of the impedance spectra at a conducting polymer/electrolyte junction.De nombreux dispositifs pour l’électronique organique et la bioélectronique reposent sur le transport mixte (électronique et ionique).Le transport électronique dans les matériaux organique est relativement bien compris, mais une compréhension fondamentale du transport des ions est manquante. J'ai développé un modèle analytique qui décrit le transport d'ions dans une jonction planaire entre un électrolyte et un film de polymère conducteur.Le modèle permet des prédictions de l'évolution temporelle du courant et du drift length des ions.Ces prédictions sont validées par des simulations numériques et en utilisant des paramètres réalistes, je montre que le modèle analytique peut être utilisé pour obtenir la mobilité des ions dans le film. De plus, j'ai développé une méthode expérimentale qui permet l'application du modèle analytique et conduit à une estimation de la mobilité des ions dans les polymères conducteurs. Le PEDOT:PSS offre un transport efficace pour les ions, qui peut être mis en relation avec le gonflement important du film dans l'eau. Je montre que la réticulation du film diminue son gonflement ainsi que la mobilité des ions. Comprendre la forte corrélation entre l'hydratation et la conductivité ionique nous permet de développer des matériaux à mobilité ionique définie et importante. A titre d'exemple, le réglage de la mobilité ionique du PEDOT:TOS est présenté en ajustant le rapport relatif de la phase hygroscopique. Pour finir, j'ai effectué des mesures de spectroscopie d'impédance électrochimique au cours d'une expérience de moving front, afin de proposer une interprétation physique des spectres d'impédance mesurés à une jonction polymère conducteur/électrolyt