FACTOR VII DEFICIENCY IN POLISH HOUND – ACCIDENTAL EVENT OR NEW PERMANENT RISK?

The Polish Hound (ogar polski) is a small, old breed of hunting dogs.The breed was recognized by the Fédération Cynologique Internationale (FCI) in 1966.A three–year–old Polish Hound male, was admitted to the Clinic of Internal Diseases of Companion Animals of Life Science University in Lublin because of signs of haemorhagic diathesis. There was no preceding history of trauma. General clinical examination was unremarkable. On initial diagnostic testing prothrombin time (PT)of the patient was prolonged nearly by three times. To characterize the dog’s coagulopathy further, samples were collected for coagulation screening tests, mixing studies and factor analyses. Investigations revealed factor VII activity below 2%.Unfortunately we had been unable to determine whether the disorder is inherited or is the result of a spontaneous mutation. It is very likely that the nature of described deficit is inherited. Canine hereditary FVII deficiency was first described in 1962 as an incidental finding in Beagles. Later, the defect was identified in another breeds, such as: English Bulldogs, Alaskan Malamutes, Miniature Schnauzers, Boxers, Scottish Deerhounds, Alaskan Klee Kai Dog and mixed–breed dogs. In 2005 a molecular characterization of FVII deficiency in Beagles was described. Unfortunately we had been unable to determine whether the disorder is inherited or is the result of a spontaneous mutation. To our knowledge this case is the first to report of isolated factor VII deficiency in Polish Hound

EPIDEMIOLOGICAL STUDIES TOWARDS CATTLE BABESIOSIS – TICK–BORNE DISEASE

Cattle babesiosis is a dangerous and economically important tick–borne disease caused by hemoprotozoan parasites of the genus Babesia. The vector of the disease are ticks from Ixodidae family. Symptoms of disease are fever, anorexia, lethargy, anemia, jaundice and hemoglobinuria.The purpose of this study was to investigate prevalence of Babesia spp. in cattle in Lublin region. The PCR technique revealed the presence of 18S RNA Babesia spp. genetic material in the blood of 20 from 192 examined animals (10.4%). Our study showed that the bovine babesiosis occur in Poland with asymptomatic form and does not reduce milk production significantly. The diagnosis depends only on the basis of detection of the genetic material of parasite, and the direct microscopic examination of blood smears is not useful in the identification of Babesia spp. in erythrocytes.The comparison of PCR products showed low homology level between isolates with present study and other Babesia sequences obtained around the world.Moreover, the study showed the prevalence of piroplasms in ticks from Lublin region is low (0,63%).

Watching mesoporous metal films grow during templated electrodeposition with in situ SAXS

In this paper, we monitor the real-time growth of mesoporous platinum during electrodeposition using small-angle X-ray scattering (SAXS). Previously, we have demonstrated that platinum films featuring the ‘single diamond’ (Fd3m) morphology can be produced from ‘double diamond’ (Pn3m) lipid cubic phase templates; the difference in symmetry provides additional scattering signals unique to the metal. Taking advantage of this, we present simultaneous in situ SAXS/electrochemical measurement as the platinum nanostructures grow within the lipid template. This measurement allows us to correlate the nanostructure appearance with the deposition current density and to monitor the evolution of the orientational and lateral ordering of the lipid and platinum during deposition and after template removal. In other periodic metal nanomaterials deposited within any of the normal topology liquid crystal, mesoporous silica or block copolymer templates previously published, the template and emerging metal have the same symmetry, so such a study has not been possible previously

Toward Improved Lifetimes of Organic Solar Cells under Thermal Stress: Substrate-Dependent Morphological Stability of PCDTBT:PCBM Films and Devices

Morphological stability is a key requirement for outdoor operation of organic solar cells. We demonstrate that morphological stability and lifetime of polymer/fullerene based solar cells under thermal stress depend strongly on the substrate interface on which the active layer is deposited. In particular, we find that the stability of benchmark PCDTBT/PCBM solar cells under modest thermal stress is substantially increased in inverted solar cells employing a ZnO substrate compared to conventional devices employing a PEDOT:PSS substrate. This improved stability is observed to correlate with PCBM nucleation at the 50 nm scale, which is shown to be strongly influenced by different substrate interfaces. Employing this approach, we demonstrate remarkable thermal stability for inverted PCDTBT:PC70BM devices on ZnO substrates, with negligible (<2%) loss of power conversion efficiency over 160 h under 85 °C thermal stress and minimal thermally induced “burn-in” effect. We thus conclude that inverted organic solar cells, in addition to showing improved environmental stability against ambient humidity exposure as widely reported previously, can also demonstrate enhanced morphological stability. As such we show that the choice of suitable substrate interfaces may be a key factor in achieving prolonged lifetimes for organic solar cells under thermal stress conditions

Supramolecular heterostructures formed by sequential epitaxial deposition of two-dimensional hydrogen-bonded arrays

Two-dimensional (2D) supramolecular arrays provide a route to the spatial control of the chemical functionality of a surface, but their deposition is in almost all cases limited to a monolayer termination. Here we investigated the sequential deposition of one 2D array on another to form a supramolecular heterostructure and realize the growth—normal to the underlying substrate—of distinct ordered layers, each of which is stabilized by in-plane hydrogen bonding. For heterostructures formed by depositing terephthalic acid or trimesic acid on cyanuric acid/melamine, we have determined, using atomic force microscopy under ambient conditions, a clear epitaxial arrangement despite the intrinsically distinct symmetries and/or lattice constants of each layer. Structures calculated using classical molecular dynamics are in excellent agreement with the orientation, registry and dimensions of the epitaxial layers. Calculations confirm that van der Waals interactions provide the dominant contribution to the adsorption energy and registry of the layers

Supramolecular networks stabilise and functionalise black phosphorus

The limited stability of the surface of black phosphorus (BP) under atmospheric conditions is a significant constraint on the exploitation of this layered material and its few layer analogue, phosphorene, as an optoelectronic material. Here we show that supramolecular networks stabilised by hydrogen bonding can be formed on BP, and that these monolayer-thick films can passivate the BP surface and inhibit oxidation under ambient conditions. The supramolecular layers are formed by solution deposition and we use atomic force microscopy to obtain images of the BP surface and hexagonal supramolecular networks of trimesic acid and melamine cyanurate (CA.M) under ambient conditions. The CA.M network is aligned with rows of phosphorus atoms and forms large domains which passivate the BP surface for more than a month, and also provides a stable supramolecular platform for the sequential deposition of 1,2,4,5-tetrakis(4-carboxyphenyl)benzene to form supramolecular heterostructures

Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET

Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create near-surface defects up to depths of few tens of nm, which act as the main fuel trapping sites during ELMs. Clustering of implantation-induced vacancies were found to take place. The incoming flux of inter-ELM plasma particles increases the different filling levels of trapped fuel in defects. The temperature increase of the W target during the pulse increases the fuel detrapping rate. The inter-ELM fuel particle flux refills the partially emptied trapping sites and fills new sites. This leads to a competing effect on the retention and release rates of the implanted particles. At high temperatures the main retention appeared in larger vacancy clusters due to increased clustering rate

Modelling of tungsten erosion and deposition in the divertor of JET-ILW in comparison to experimental findings

The erosion, transport and deposition of tungsten in the outer divertor of JET-ILW has been studied for an HMode discharge with low frequency ELMs. For this specific case with an inter-ELM electron temperature at the strike point of about 20 eV, tungsten sputtering between ELMs is almost exclusively due to beryllium impurity and self-sputtering. However, during ELMs tungsten sputtering due to deuterium becomes important and even dominates. The amount of simulated local deposition of tungsten relative to the amount of sputtered tungsten in between ELMs is very high and reaches values of 99% for an electron density of 5E13 cm$^{-3}$ at the strike point and electron temperatures between 10 and 30 eV. Smaller deposition values are simulated with reduced electron density. The direction of the B-field significantly influences the local deposition and leads to a reduction if the E×B drift directs towards the scrape-off-layer. Also, the thermal force can reduce the tungsten deposition, however, an ion temperature gradient of about 0.1 eV/mm or larger is needed for a significant effect. The tungsten deposition simulated during ELMs reaches values of about 98% assuming ELM parameters according to free-streaming model. The measured WI emission profiles in between and within ELMs have been reproduced by the simulation. The contribution to the overall net tungsten erosion during ELMs is about 5 times larger than the one in between ELMs for the studied case. However, this is due to the rather low electron temperature in between ELMs, which leads to deuterium impact energies below the sputtering threshold for tungsten