4,267 research outputs found
Tribo-corrosion of steel in artificial saliva
Stainless steel is widely used as dental implant. However, there has been little work on the micro-abrasion of such materials in laboratory simulated oral environments, where abrasion, sliding wear can interact simultaneously. In this study, the effects of applied load, and exposure time were evaluated for a 316 stainless steel in a laboratory simulated artificial saliva. Polarization curves showed an enhancement of corrosion current density with increases in applied load. Wear maps were produced showing low wear safety regimes at intermediate loads and exposure times. Possible reasons for such trends are interpreted in terms of the ability of the passive film in providing resistance against third body particle impact and the concentration of particles in the contact at higher loads
Method and apparatus for detecting laminar flow separation and reattachment
The invention is a method and apparatus for detecting laminar flow separation and flow reattachment of a fluid stream by simultaneously sensing and comparing a plurality of output signals, each representing the dynamic shear stress at one of an equal number of sensors spaced along a straight line on the surface of an airfoil or the like that extends parallel to the fluid stream. The output signals are concurrently compared to detect the sensors across which a reversal in phase of said output signal occurs, said detected sensors being in the region of laminar separation or reattachment. The novelty in this invention is the discovery and use of the phase reversal phenomena to detect laminar separation and attachment of a fluid stream from any surface such as an airfoil supported therein
Micro-abrasion-corrosion interactions of Ni-Cr/WC based coatings : approaches to construction of tribo-corrosion maps for the abrasion-corrosion synergism
The process of micro-abrasion-corrosion has been the subject of much research in recent years due to the fact that the action of micron sized particles, typically less than 10 um in diameter, can cause significant degradation of materials in many diverse environments involving aqueous corrosion. Cermet based coatings are often used to combat micro-abrasion-corrosion, but has been little work carried out to characterize the performance of such coatings exposed to micro-abrasion-corrosion or to provide a basis for coating optimisation. In addition, a basis for defining the various micro-abrasion-corrosion interactions has not been suggested to date. In this study the micro-abrasion-corrosion performance of a Ni-Cr/WC coating was assessed and compared to the performance of the steel substrate. The results were used to identify regimes of micro-abrasion as a function of applied load and pH of the solution. In addition, micro-abrasion-corrosion maps were constructed based on the results, showing the variation between micro-abrasion-corrosion regimes, as a function of applied load and pH of the solution
A map and a pipe : a new approach to characterizing erosion-corrosion regimes of Fe in three dimensions using CFD modelling
In studies of erosion-corrosion, much work has been carried out in recent years to identify regimes of behaviour. Such regimes describe the transition between the erosion and corrosion dominated mechanisms. They can also be used, by assigning various criteria, to identify other regimes of behaviour such as extent of "synergy/antagonism" in the process, so-called "additive" behaviour and the extent of wastage. Despite this work, there has been very little effort to combine the two dimensional erosion-corrosion map with CFD modelling approaches, in which the characteristics of the fluid are accounted for in the regime description. This means that extrapolation of such maps in two dimensions to a three dimensional real surface presents some difficulties. However, it is these surfaces that corrosion engineers are required to tailor, either through modification of the material composition, the surface or the process parameters, for optimum erosion-corrosion resistance. In this paper, a methodology is generated to combine the concepts of CFD modelling, and the erosion-corrosion regime map for a specific geometry and for a range of pure metals in descending order in the Galvanic series. The changes in regimes are presented as a function of variation in the erosion and corrosion variables i.e. particle size, hardness and solution pH. Erosion-corrosion regimes are presented, based on the model results, showing the wide range of mechanistic and wastage mechanisms possible over the component surface
Distribution of the Water Scorpion \u3ci\u3eNepa Apiculata\u3c/i\u3e (Hemiptera: Nepidae) in Wisconsin
The water scorpion Nepa apiculata Uhler was considered rare in Wiscon- sin by Hilsenhoff (1984), who collected only 11 individuals during a 25-year period. All of his collections were from overwintering sites, especially debris in streams, during early spring or autumn (Hilsenhoff, pers. comm.). He concluded that the species was restricted to southern Wisconsin. Recent collections indicate that N. apiculata is more widely distributed. These records, summarized below, are documented with specimens in the University of Wisconsin-Madison insect collection
The string tension in the maximally Abelian gauge after smoothing
We apply smoothing to SU(2) lattice field configurations in 3+1 dimensions
before fixing to the maximally Abelian gauge. The Abelian projected string
tension is shown to be stable under this, whilst the monopole string tension
declines by O(30%). Blocking of the SU(2) fields reduces this effect, but the
use of extended monopole definitions does not. We discuss these results in the
context of additional confining excitations in the U(1) vacuum.Comment: LATTICE98(confine
Micro-abrasion resistance of thermochemically treated steels in aqueous solutions: Mechanisms, maps, materials selection
The area of micro-abrasion is an interesting and relatively recent area in tribo-testing methodologies, where small particles of less than 10 ÎĽm are employed between interacting surfaces. It is topical for a number of reasons; its direct relation to the mechanisms of the wear process in bio-tribological applications, ease in conducting tests and the good repeatability of the test results. It has widespread applications in conditions used in the space and offshore industries to bio-engineering for artificial joints and implants. There have been many recent studies on the micro-abrasion performance of materials, ranging from work basic metals to nano-structured coatings. However, no significant work is reported on the micro-abrasion resistance of thermochemically treated steels. Hence, this paper looks at the performance of two thermochemically treated steels, Tenifer bath nitride stainless steel (T-SS) and vanadized carbon steel (V-CS) in such conditions with reference to the stainless steel (SS) by varying the applied load and sliding distance. The results indicated that T-SS demonstrates exceptionally poor resistance to micro-abrasion. It was observed that the heat treatment process and properties of the hardened layer (hardness and thickness) are extremely important in determining the micro-abrasion resistance of such steels. Finally, the results were used to develop micro-abrasion mechanism and wastage maps, which can be used to optimize the surface treated materials for micro-abrasion resistance
Interpreting Regulations
The age of statutes has given way to an era of regulations, but our jurisprudence has fallen behind. Despite the centrality of regulations to law, courts have no intelligible approach to regulatory interpretation. The neglect of regulatory interpretation is not only a shortcoming in interpretive theory but also a practical problem for administrative law. Canonical doctrines of administrative law — Chevron, Seminole Rock/Auer, and Accardi — involve interpreting regulations, and yet courts lack a consistent approach. This Article develops a method for interpreting regulations and, more generally, situates regulatory interpretation within debates over legal interpretation. It argues that a purposive approach, not a textualist one, best suits the distinctive legal character of regulations. Administrative law requires agencies to produce detailed explanations of the grounds for their regulations, called statements of basis and purpose. Courts routinely use these statements to assess the validity of regulations. This Article argues that these statements should guide judicial interpretation of regulations as well. By relying on these statements as privileged sources for interpretation, courts not only grant deference to agencies but also treat these statements as creating commitments with respect to a regulation’s meaning. This approach justifies a framework for interpreting regulations under Chevron, Seminole Rock/Auer, and Accardi that is consistent with the deferential grounding of these doctrines, and provides more notice to those regulated than does relying on the regulation’s text alone. This Article also shows how regulatory purposivism constitutes a new foothold for Henry Hart and Albert Sacks’s classic legal process account of purposivism. Hart and Sacks’s theory is vulnerable to the criticism that discerning statutory purpose is elusive because statutes do not often include enacted statements of purpose. Regulatory purposivism, however, avoids this concern because statements of basis and purpose offer a consistent and reliable source for discerning a regulation’s purpose. From this perspective, the best days for Hart and Sacks’s legal process theory may be ahead
- …