Evaluation of interface adhesion of hot-dipped zinc coating on TRIP steel with tensile testing and finite element calculation

In this work, a methodology for the determination of the interface adhesion strength of zinc coating on TRIP steel is present. This method consists of a conventional tensile test in combination with finite element calculation. The relation between the average interface crack length and the applied tensile stress is determined on the partially delaminated coating with in-situ tensile test. The delamination process of zinc coating on steel substrate is simulated by using a two-grain finite element model with different interface adhesion strengths. By comparing the experimental observation with the finite element calculations, the interface adhesion strength is estimated. The interface adhesion strength of the zinc coating on transformation induced plasticity (TRIP) steel is found as high as 160 MPa. The influences of microstructural parameters of zinc coating including zinc grain orientation and grain size on the delamination behavior of the zinc coating are also analyzed with the finite element model

A framework for analyzing institutional gaps in natural resource governance

In this paper we present the Inter-Institutional Gap(IIG) Framework as a novel approach to conceptualizing the often-overlooked interconnectivity of different rule-levels between formal and informal institutions in a resource system. This framework goes beyond the existing concepts of legal pluralism, institutional void, structural hole, and cultural mismatch, each of which offer valuable insights to particular gaps between formal and informal institutions, but do not sufficiently address the interaction at every rule level (i.e. constitutional choice, collective choice and operational choice rules). In order to demonstrate the potential of our framework for better understanding the underlying causes of inter-institutional gaps, we apply it to four case studies that encompass diverse geographical locations, governance scales, and social-ecological systems. Results reveal inter-institutional gaps can be created when there are unintended, unforeseen or hidden gaps between different rule hierarchies in two or more simultaneously operating institutions. More specifically we observe that: i) inter-institutional gaps are co-existing, therefore if a certain gap is identified, other gaps may be expected; ii) certain gaps may reveal latent gaps; and iii) intermediaries may be key to addressing inter-institutional gaps. In many cases, sustainable natural resource management and regulation cannot be achieved without directly addressing the inter-institutional gaps that exist between formal and informal institutions operating in the same resource system. The Framework facilitates analysis and understanding of multi-level governance structures in pursuit of addressing complex natural resource management issues

Tracking echovirus eleven outbreaks in Guangdong, China

In April 2019, a suspect cluster of enterovirus cases was reported in a neonatology department in Guangdong, China, resulting in five deaths. We aimed to investigate the pathogen profiles in fatal cases, the circulation and transmission pattern of the viruses by combining metatranscriptomic, phylogenetic, and epidemiological analyses. Metatranscriptomic sequencing was used to characterize the enteroviruses. Clinical and environmental surveillance in the local population was performed to understand the prevalence and genetic diversity of the viruses in the local population. The possible source(s), evolution, transmission, and recombination of the viruses were investigated by incorporating genomes from the current outbreak, from local retrospective surveillance, and from public databases. Metatranscriptomic analysis identified Echovirus 11 (E11) in three fatal cases. Seroprevalence of neutralization antibody to E11 was 35 to 44 per cent in 3–15 age groups of general population, and the viruses were associated with various clinical symptoms. From the viral phylogeny, nosocomial transmissions were identified and all E11 2019 outbreak strains were closely related with E11 strains circulating in local population 2017–19. Frequent recombination occurred among the 2019 Guangdong E11 outbreak strains and various genotypes in enterovirus B species. This study provides an example of combining advanced genetic technology and epidemiological surveillance in pathogen diagnosis, source(s), and transmission tracing during an infectious disease outbreak. The result highlights the hidden E11 circulation and the risk of viral transmission and infection in the young age population in China. Frequent recombination between Guangdong-like strains and other enterovirus genotypes also implies the prevalence of these emerging E11 strains

Calibration of linear contact stiffnesses in discrete element models using a hybrid analytical-computational framework

Efficient selections of particle-scale contact parameters in discrete element modelling remain an open question. The aim of this study is to provide a hybrid calibration framework to estimate linear contact stiffnesses (normal and tangential) for both two-dimensional and three-dimensional simulations. Analytical formulas linking macroscopic parameters (Young's modulus, Poisson's ratio) to mesoscopic particle parameters for granular systems are derived based on statistically isotropic packings under small-strain isotropic stress conditions. By taking the derived analytical solutions as initial approximations, the gradient descent algorithm automatically obtains a reliable numerical estimation. The proposed framework is validated with several numerical cases including randomly distributed monodisperse and polydisperse packings. The results show that this hybrid method practically reduces the time for artificial trials and errors to obtain reasonable stiffness parameters. The proposed framework can be extended to other parameter calibration problems in DEM

Multifunctional tribometer development and performance study of CuCrZr-316L material pair for ITER application

Radio-Frequency (RF) contacts are key components on the International Thermonuclear Experimental Reactor (ITER) Ion Cyclotron Resonance Heating (ICRH) antenna, and these components are facing big challenges such as 2 kA operation current load and intensive sliding under up to 250 °C in high vacuum. Stainless steel (SS) 316L and CuCrZr are most likely to be applied as base materials for the conductor and the RF contacts louvers. To evaluate the performance of the selected materials, their electrical and tribological behaviors have to be studied. A multifunctional tribometer which can mimic the ITER ICRH RF contacts' relevant working conditions was designed and built in CEA. The contact resistance (Rc) and coefficient of friction (CoF) of CuCrZr-316L pair were researched on this tribometer

Molecular insights on the interference of simplified lung surfactant models by gold nanoparticle pollutants

YesInhaled nanoparticles (NPs) are experienced by the first biological barrier inside the alveolus known as lung surfactant (LS), a surface tension reducing agent, consisting of phospholipids and proteins in the form of the monolayer at the air-water interface. The monolayer surface tension is continuously regulated by the alveolus compression and expansion and protects the alveoli from collapsing. Inhaled NPs can reach deep into the lungs and interfere with the biophysical properties of the lung components. The interaction mechanisms of bare gold nanoparticles (AuNPs) with the LS monolayer and the consequences of the interactions on lung function are not well understood. Coarse-grained molecular dynamics simulations were carried out to elucidate the interactions of AuNPs with simplified LS monolayers at the nanoscale. It was observed that the interactions of AuNPs and LS components deform the monolayer structure, change the biophysical properties of LS and create pores in the monolayer, which all interfere with the normal lungs function. The results also indicate that AuNP concentrations >0.1 mol% (of AuNPs/lipids) hinder the lowering of the LS surface tension, a prerequisite of the normal breathing process. Overall, these findings could help to identify the possible consequences of airborne NPs inhalation and their contribution to the potential development of various lung diseases.University of Technology Sydney (UTS) FEIT Research Scholarship, UTS IRS (S.I.H.), 2018 Blue Sky scheme–Suvash Saha (Activity 2232368), N.S.G is supported by the Vice-Chancellor fellowship funded by QUT

Diatreta Cups, Light in Roman Dining Spaces

Cage cups or Diatreta are ancient Roman glass vessels produced by creating a thick blown blank of glass that, once cooled down, is taken to a glass cutter or diatretarii. The latter would cut and carve away most of the glass leaving a transparent vessel inside and an open-work decoration separated through thin posts of glass. The work is very delicate and exclusive, produced within limited space in time with no record of similar vessels until the late 1800 (Donald B. Harden & Toynbee 1959, p.181). Many of these glass objects have good-will inscriptions or decorations that express the importance of drinking. As for their provenance, most –when found in context- have been found in pagan burials. Nevertheless some fragments have been found in Christian environments or with Christian motifs like the Szekszárd cup. The location of these finds is mostly in the Rhine area –northern Empire, when Milan was one of its capitals (Aquaro 2004)- but the actual extent of finds expand throughout the 4th century extent of the Roman Empire. Considering their typological analysis there are basically two types, beaker and bowl. Beakers are considered drinking vessels as they either display a legend or a mythological reference to drink or wine. Whereas a general consensus agrees that open bowl-form cups were hanging lamps (Whitehouse 1988, p.28) since the 1986 find of a diatreta bowl with copper alloy hanging attachments. It is clear these were luxury objects to be used in special occasions and spaces. The aim of this paper is to understand the space were socialisation and drinking took place and the importance of luxurious objects to adorn, display and use. The paper will also put forward the idea that the beaker shaped diatreta vessels, usually considered for drinking, could have been lamps that encouraged drinking and good will to the guests. This paper is structured to first consider an introduction to late luxury Roman glass and then analysing the typological shape of all, or most of the diatreta currently known; secondly, through assessment by the means of comparison, analyse the writings or decorations the vessels were endowed with. Thirdly, by describing and understanding the people and the space were these vessels would have been used, emphasise the beauty of illuminating such spaces with these vessels. According to Herodotus in his historical investigation –5th century-, dress habits and food regime are elements of extreme importance to understand a people (Caporusso et al. 2011, p.12). This idea is not only valid for Herodotus’ time but it is something anthropology uses time and again to explain different aspects in people’s way of life. Through food and its environment, the dining space, this paper will aim to put the cage cups into a social context in order to give emphasis to the hypothesis of light versus wine

Measurement of the integrated and differential t(t)over-bar production cross sections for high-p(T) top quarks in pp collisions at root s=8 TeV

Peer reviewe