64 research outputs found
Enhanced Predictive Current Control of Three-Phase Grid-Tied Reversible Converters with Improved Switching Patterns
A predictive current control strategy can realize flexible regulation of three-phase grid-tied converters based on system behaviour prediction and cost function minimization. However, when the predictive current control strategy with conventional switching patterns is adopted, the predicted duration time for voltage vectors turns out to be negative in some cases, especially under the conditions of bidirectional power flows and transient situations, leading to system performance deteriorations. This paper aims to clarify the real reason for this phenomenon under bidirectional power flows, i.e., rectifier mode and inverter mode, and, furthermore, seeks to propose effective solutions. A detailed analysis of instantaneous current variations under different conditions was conducted. An enhanced predictive current control strategy with improved switching patterns was then proposed. An experimental platform was built based on a commercial converter produced by Danfoss, and moreover, relative experiments were carried out, confirming the superiority of the proposed scheme
Dual-Loop-Based Current Controller for Transformerless Grid-Tied Converters with Improved Disturbance Attenuation against Voltage Measurement Errors
To eliminate current harmonics and to obtain enhanced dynamic behaviors, the voltage feedforward scheme is normally adopted in the control process of transformerless grid-tied converters. However, voltage measurement errors caused by parameter variation of sampling resistance and zero-voltage drift in analog devices will result in DC current injection and distorted grid currents in grid-tied systems. Conventional compensation strategies based on plug-in repetitive controllers and multiple resonant controllers are considered to be effective solutions to solve this problem. Even though undesired components in grid currents can be partially mitigated with these conventional compensation schemes adopted, degraded reference-tracking process with oscillations and slow dynamics are inevitably caused by the controller coupling. To obtain decoupling between reference tracking and disturbance rejection, this paper proposes a dual-loop controller to achieve current regulation and to suppress the disturbances caused by voltage measurement errors. With the proposed dual-loop controller adopted, DC current injection and distortion of grid currents can be effectively attenuated while excellent transient performance with negligible overshoot and fast step response can be simultaneously guaranteed. Frequency-domain analysis and experimental validations are both conducted to verify the effectiveness of the proposed strategy
Assessing transient response of DFIG based wind turbines during voltage dips regarding main flux saturation and rotor deep-bar effect
With increasing wind power penetration, transient responses of doubly-fed-induction-generator (DFIG) based wind turbines gain attentive focus. Accurate prediction of transient performance of DFIG under grid faults is required with increasing wind power penetration. Taking into account the main flux saturation and deep-bar effect, this paper concentrates on transient responses and stability of the DFIG system under symmetrical grid faults. Their roles played in the enhancement of system transient stability are clarified. The analyses proposed contribute greatly to proper selection, design and coordination of protection devices and control strategies as well as stability studies.Deep-bar effect Doubly-fed-induction-generator (DFIG) Saturation Transient response Voltage dip Wind energy
Enhanced predictive current control of three-phase grid-tied reversible converters with improved switching patterns
A predictive current control strategy can realize flexible regulation of three-phase grid-tied converters based on system behaviour prediction and cost function minimization. However, when the predictive current control strategy with conventional switching patterns is adopted, the predicted duration time for voltage vectors turns out to be negative in some cases, especially under the conditions of bidirectional power flows and transient situations, leading to system performance deteriorations. This paper aims to clarify the real reason for this phenomenon under bidirectional power flows, i.e., rectifier mode and inverter mode, and, furthermore, seeks to propose effective solutions. A detailed analysis of instantaneous current variations under different conditions was conducted. An enhanced predictive current control strategy with improved switching patterns was then proposed. An experimental platform was built based on a commercial converter produced by Danfoss, and moreover, relative experiments were carried out, confirming the superiority of the proposed scheme
- …