Double Bragg-Grating Scanning- Transmitter/Receiver

Double Bragg grating scanner receivers (DBS) and methods thereof based on spinning high-efficiency transmitting or reflecting holograms in photo-thermo-refractive (PTRG) glass provides unlimited field of view while incident angle for all components do not exceed approximately 45 degrees. The devices and methods are highly tolerable to high power laser radiation and has no restriction for the use in any laser systems working in visible and near IR spectral regions. Rate of scanning by DBS is higher compared to known mechanical scanners because the use of thin glass plates with recorded holograms and spinning instead of rocking. The components described herein are holographic optical devices (reflecting and transmitting volume gratings) for visible and near IR spectral regions with absolute diffraction efficiency exceeding approximately 95% and high thermal, optical and mechanical stability

Sensitization of Photo-Thermo-Refractive Glass to Visable Radiation by Two-Step Illumination (CIP)

Photo-thermo-refractive (PTR) glass is a multi-component silicate glass having photosensitivity in rear UV region. A novel process is disclosed for PTR glass sensitization to visible region by means of two-step illumination followed by thermal development. This disclosed process utilizes a first illumination at approximately 325 nm followed by a second illumination with radiation in the visible spectral region out of the region of original photosensitivity of the PTR glass which enables fabrication of complex holographic optical elements for visible region such as plane elements, lenses, curved mirrors, combinations of complex elements and optical correlators. The same process provides a positive increment of refractive index in the bulk of the PTR glass and, therefore, can be used for refractive optical elements recording, such as lenses and waveguides

Volume Bragg Lasers Based on High Efficiency Diffractive Elements in Photo-Thermo-Refractive Glass

A volume Bragg laser including a resonator comprising photo-thermo-refractive (PTR) volume diffractive elements that can be used in a laser emitting window of transparency of PTR glass to provide control of the lasers spectral and angular parameters, and methods, devices, apparatus and systems related thereto. The high efficiency volume Bragg gratings recorded in photo-thermo-refractive (PTR) glass preferably has an absolute diffraction efficiency exceeding approximately 95% in transmitting and reflecting modes is used for selection of a transverse and longitudinal mode for thermal, optical and mechanical stabilization of the volume Bragg lasers and coherent coupling of different lasers. Robustness, compactness, thermal and laser stability along with the ability to place several elements in the same space allows the use of sophisticated optical system according to the invention in fields of military lasers, optical communications, data storage and processing, and the like

Volume Bragg Lasers Based on High Efficiency Diffractive Elements in Photo-Thermo-Refractive Glass CIP

A volume Bragg laser including a resonator comprising photo-thermo-refractive (PTR) volume diffractive elements that can be used in a laser emitting window of transparency of PTR glass to provide control of the lasers spectral and angular parameters, and methods, devices, apparatus and systems related thereto. The high efficiency volume Bragg gratings recorded in photo-thermo-refractive (PTR) glass preferably has an absolute diffraction efficiency exceeding approximately 95% in transmitting and reflecting modes is used for selection of a transverse and longitudinal mode for thermal, optical and mechanical stabilization of the volume Bragg lasers and coherent coupling of different lasers. Robustness, compactness, thermal and laser stability along with the ability to place several elements in the same space allows the use of sophisticated optical system according to the invention in fields of military lasers, optical communications, data storage and processing, and the like

Process for Production of High Efficiency Volume Diffractive Elements in Photo-Thermo-Refractive Glass

A novel process is proposed for the volume diffractive element (Bragg grating) fabrication in photosensitive silicate glasses doped with silver, cerium, fluorine, and bromine. The process employs a photo-thermo-refractive (PTR) glass of high purity exposed to ultraviolet (UV) radiation of a He--Cd laser at 325 nm followed by thermal development at temperatures from 480.degree. C. to 580.degree. C., preferably at 520.degree. C., from several minutes to several hours. Absolute diffraction efficiency up to 95% was observed for 1 mm thick gratings. Maximum spatial frequency recorded in PTR glass was about of 10,000 mm.sup.-1. No decreasing of diffraction efficiency were detected at low spatial frequencies. Original glasses were transparent (absorption coefficient less than 1 cm.sup.-1) from 350 to 4100 nm. Induced losses in exposed and developed glass decreased from 0.3 to 0.03 cm.sup.-1 between 400 and 700 nm, respectively, and did not exceed 0.01-0.02 cm.sup.-1 in the infrared (IR) regi

High Efficiency Volume Diffractive Elements in Photo-Thermo-Refractive Glass

Novel volume holographic elements were made from Bragg diffractive gratings in photo-thermo-refractive (PTR) glass with absolute diffraction efficiency ranging from greater than approximately 50% up to greater than approximately 93% and total losses below 5%. Both transmitting and reflecting volume diffractive elements were done from PTR glasses because of high spatial resolution enabling recording spatial frequencies up to 10000 mm.sup.-1. The use of such diffractive elements as angular selector, spatial filter, attenuator, switcher, modulator, beam splitter, beam sampler, beam deflectors controlled by positioning of grating matrix, by a small-angle master deflector or by spectral scanning, selector of particular wavelengths (notch filter, add/drop element, spectral shape former (gain equalizer), spectral sensor (wavelength meter/wavelocker), angular sensor (pointing locker), Bragg spectrometer (spectral analyzer), transversal and longitudinal mode selector in laser resonator were de

Process of production of high efficiency diffractive and refractive optical elements in multicomponent silicate glass by nonlinear photo ionization followed by thermal development.

Apparatus, methods and systems for production of high efficiency refractive and diffractive elements by providing a photo-sensitizer fi-ee multicomponent glass, exposing the multi component glass to pulsed laser radiation to produce refractive indexed modulation, and heating the exposed multicomponent silicate glass to produce the high efficiency refractive and diffractive elements. The pulsed laser radiation is infrared femtosecond pulses to ultraviolet nanosecond pulses which provide ionization of glass matrix. The multicomponent glass is a photosensitive glass with high transparency in ultraviolet spectral region, e.g. silicate glass which includes silver, fluorine and bromine and does not contain photosensitizers such as cerium and antimony, PTR glass, cerium free PTR glass and cerium + antimony free PTR glass

Stretching and compression of laser pulses by means of high efficiency volume diffractive gratings with variable period in photo-thermo-refractive glass

High efficiency reflective volume Bragg gratings with chirped gratings recorded in photo-thermo-refractive glass having an absolute diffraction efficiency exceeding 95% in transmitting and reflecting modes are used to stretch and/or compress ultrashort laser pulses with high efficiency. Robustness, compactness, thermal and laser stability along with placement of multiple elements in the same space provides femtosecond laser system with high efficiency of stretching and re-compression of femtosecond pulses

Laser Pulse Temporal, Spectral And Spatial Shaping Devices Based On Volume Diffractive Gratings With Variable Parameters

Recent invention of longitudinally chirped volume Bragg gratings has dramatically changed a design of high power femtosecond lasers. Replacing of bulky pairs of conventional surface gratings with compact and robust chirped volume Bragg gratings for stretching and compression of laser pulses in chirped-pulse-amplification systems enabled decrease of size and weight of those systems by several times. This patent application enables substantial increase of stretching time and compression to shorter pulses along with more complex shaping of laser pulses in both temporal and spectral domains

Optical beam steering and switching by optically controlled liquid crystal spatial light modulator with angular magnification by high efficiency PTR Bragg gratings.

Non-mechanical optical beam steering and switching is produced by optically controlled liquid crystal spatial light modulator with angular magnification by high efficiency volume Bragg gratings recorded in a photosensitive PTR glass. Small angle beam deflection in a photoactive liquid crystal cell is produced by exposing it to a controlling beam from an external source of radiation with predetermined distribution of power density which causes predetermined spatial gradients of a refractive index in a liquid crystal cell and, therefore, refraction of a controlled beam which is made to propagate in the region with spatial gradient of the refractive index. Large angle beam deflection is produced by a volume Bragg grating with angular selectivity adjusted in such way that small angle scanning produced by optically controlled liquid crystal spatial light modulator results in change of diffraction efficiency from zero to 100% for switching the beam for two Bragg angles