Differences in platelet-rich plasma composition influence bone healing

Aim: Platelet-rich plasma (PRP) is an autologous blood-derived material that has been used to enhance bone regeneration. Clinical studies, however, reported inconsistent outcomes. This study aimed to assess the effect of changes in leucocyte and PRP (L-PRP) composition on bone defect healing. Materials and Methods: L-PRPs were prepared using different centrifugation methods and their regenerative potential was assessed in an in-vivo rat model. Bilateral critical-size tibial bone defects were created and filled with single-spin L-PRP, double-spin L-PRP, or filtered L-PRP. Empty defects and defects treated with collagen scaffolds served as controls. Rats were euthanized after 2 weeks, and their tibias were collected and analysed using micro-CT and histology. Results: Double-spin L-PRP contained higher concentrations of platelets than singlespin L-PRP and filtered L-PRP. Filtration of single-spin L-PRP resulted in lower concentrations of minerals and metabolites. In vivo, double-spin L-PRP improved bone healing by significantly reducing the size of bone defects (1.08 ± 0.2 mm3 ) compared to single-spin L-PRP (1.42 ± 0.27 mm3 ) or filtered L-PRP (1.38 ± 0.28 mm3 ). There were fewer mast cells, lymphocytes, and macrophages in defects treated with double-spin L-PRP than in those treated with single-spin or filtered L-PRP. Conclusion: The preparation method of L-PRP affects their composition and potential to regenerate bone

Quantum coherent control of a hybrid superconducting circuit made with graphene-based van der Waals heterostructures

Quantum coherence and control is foundational to the science and engineering of quantum systems. In van der Waals (vdW) materials, the collective coherent behavior of carriers has been probed successfully by transport measurements. However, temporal coherence and control, as exemplified by manipulating a single quantum degree of freedom, remains to be verified. Here we demonstrate such coherence and control of a superconducting circuit incorporating graphene-based Josephson junctions. Furthermore, we show that this device can be operated as a voltage-tunable transmon qubit, whose spectrum reflects the electronic properties of massless Dirac fermions traveling ballistically. In addition to the potential for advancing extensible quantum computing technology, our results represent a new approach to studying vdW materials using microwave photons in coherent quantum circuits

Disruption of RFX family transcription factors causes autism, attention-deficit/hyperactivity disorder, intellectual disability, and dysregulated behavior

Purpose We describe a novel neurobehavioral phenotype of autism spectrum disorder (ASD), intellectual disability, and/or attention-deficit/hyperactivity disorder (ADHD) associated with de novo or inherited deleterious variants in members of the RFX family of genes. RFX genes are evolutionarily conserved transcription factors that act as master regulators of central nervous system development and ciliogenesis. Methods We assembled a cohort of 38 individuals (from 33 unrelated families) with de novo variants in RFX3, RFX4, and RFX7. We describe their common clinical phenotypes and present bioinformatic analyses of expression patterns and downstream targets of these genes as they relate to other neurodevelopmental risk genes. Results These individuals share neurobehavioral features including ASD, intellectual disability, and/or ADHD; other frequent features include hypersensitivity to sensory stimuli and sleep problems. RFX3, RFX4, and RFX7 are strongly expressed in developing and adult human brain, and X-box binding motifs as well as RFX ChIP-seq peaks are enriched in the cis-regulatory regions of known ASD risk genes. Conclusion These results establish a likely role of deleterious variation in RFX3, RFX4, and RFX7 in cases of monogenic intellectual disability, ADHD and ASD, and position these genes as potentially critical transcriptional regulators of neurobiological pathways associated with neurodevelopmental disease pathogenesis

Expression of osterix Is Regulated by FGF and Wnt/β-Catenin Signalling during Osteoblast Differentiation

Osteoblast differentiation from mesenchymal cells is regulated by multiple signalling pathways. Here we have analysed the roles of Fibroblast Growth Factor (FGF) and canonical Wingless-type MMTV integration site (Wnt/β-Catenin) signalling pathways on zebrafish osteogenesis. We have used transgenic and chemical interference approaches to manipulate these pathways and have found that both pathways are required for osteoblast differentiation in vivo. Our analysis of bone markers suggests that these pathways act at the same stage of differentiation to initiate expression of the osteoblast master regulatory gene osterix (osx). We use two independent approaches that suggest that osx is a direct target of these pathways. Firstly, we manipulate signalling and show that osx gene expression responds with similar kinetics to that of known transcriptional targets of the FGF and Wnt pathways. Secondly, we have performed ChIP with transcription factors for both pathways and our data suggest that a genomic region in the first intron of osx mediates transcriptional activation. Based upon these data, we propose that FGF and Wnt/β-Catenin pathways act in part by directing transcription of osx to promote osteoblast differentiation at sites of bone formation

Informing the development of Australia's national eating disorders research and translation strategy : a rapid review methodology

Background Eating disorders (EDs) are highly complex mental illnesses associated with significant medical complications. There are currently knowledge gaps in research relating to the epidemiology, aetiology, treatment, burden, and outcomes of eating disorders. To clearly identify and begin addressing the major deficits in the scientific, medical, and clinical understanding of these mental illnesses, the Australian Government Department of Health in 2019 funded the InsideOut Institute (IOI) to develop the Australian Eating Disorder Research and Translation Strategy, the primary aim of which was to identify priorities and targets for building research capacity and outputs. A series of rapid reviews (RR) were conducted to map the current state of knowledge, identify evidence gaps, and inform development of the national research strategy. Published peer-reviewed literature on DSM-5 listed EDs, across eight knowledge domains was reviewed: (1) population, prevalence, disease burden, Quality of Life in Western developed countries; (2) risk factors; (3) co-occurring conditions and medical complications; (4) screening and diagnosis; (5) prevention and early intervention; (6) psychotherapies and relapse prevention; (7) models of care; (8) pharmacotherapies, alternative and adjunctive therapies; and (9) outcomes (including mortality). While RRs are systematic in nature, they are distinct from systematic reviews in their aim to gather evidence in a timely manner to support decision-making on urgent or high-priority health concerns at the national level. Results Three medical science databases were searched as the primary source of literature for the RRs: Science Direct, PubMed and OVID (Medline). The search was completed on 31st May 2021 (spanning January 2009-May 2021). At writing, a total of 1,320 articles met eligibility criteria and were included in the final review. Conclusions For each RR, the evidence has been organised to review the knowledge area and identify gaps for further research and investment. The series of RRs (published separately within the current series) are designed to support the development of research and translation practice in the field of EDs. They highlight areas for investment and investigation, and provide researchers, service planners and providers, and research funders rapid access to quality current evidence, which has been synthesised and organised to assist decision-making

Mechanical design of the optical modules intended for IceCube-Gen2

IceCube-Gen2 is an expansion of the IceCube neutrino observatory at the South Pole that aims to increase the sensitivity to high-energy neutrinos by an order of magnitude. To this end, about 10,000 new optical modules will be installed, instrumenting a fiducial volume of about 8 km3. Two newly developed optical module types increase IceCube’s current sensitivity per module by a factor of three by integrating 16 and 18 newly developed four-inch PMTs in specially designed 12.5-inch diameter pressure vessels. Both designs use conical silicone gel pads to optically couple the PMTs to the pressure vessel to increase photon collection efficiency. The outside portion of gel pads are pre-cast onto each PMT prior to integration, while the interiors are filled and cast after the PMT assemblies are installed in the pressure vessel via a pushing mechanism. This paper presents both the mechanical design, as well as the performance of prototype modules at high pressure (70 MPa) and low temperature (−40∘C), characteristic of the environment inside the South Pole ice

The next generation neutrino telescope: IceCube-Gen2

The IceCube Neutrino Observatory, a cubic-kilometer-scale neutrino detector at the geographic South Pole, has reached a number of milestones in the field of neutrino astrophysics: the discovery of a high-energy astrophysical neutrino flux, the temporal and directional correlation of neutrinos with a flaring blazar, and a steady emission of neutrinos from the direction of an active galaxy of a Seyfert II type and the Milky Way. The next generation neutrino telescope, IceCube-Gen2, currently under development, will consist of three essential components: an array of about 10,000 optical sensors, embedded within approximately 8 cubic kilometers of ice, for detecting neutrinos with energies of TeV and above, with a sensitivity five times greater than that of IceCube; a surface array with scintillation panels and radio antennas targeting air showers; and buried radio antennas distributed over an area of more than 400 square kilometers to significantly enhance the sensitivity of detecting neutrino sources beyond EeV. This contribution describes the design and status of IceCube-Gen2 and discusses the expected sensitivity from the simulations of the optical, surface, and radio components

Sensitivity of IceCube-Gen2 to measure flavor composition of Astrophysical neutrinos

The observation of an astrophysical neutrino flux in IceCube and its detection capability to separate between the different neutrino flavors has led IceCube to constraint the flavor content of this flux. IceCube-Gen2 is the planned extension of the current IceCube detector, which will be about 8 times larger than the current instrumented volume. In this work, we study the sensitivity of IceCube-Gen2 to the astrophysical neutrino flavor composition and investigate its tau neutrino identification capabilities. We apply the IceCube analysis on a simulated IceCube-Gen2 dataset that mimics the High Energy Starting Event (HESE) classification. Reconstructions are performed using sensors that have 3 times higher quantum efficiency and isotropic angular acceptance compared to the current IceCube optical modules. We present the projected sensitivity for 10 years of data on constraining the flavor ratio of the astrophysical neutrino flux at Earth by IceCube-Gen2

Estimating the coincidence rate between the optical and radio array of IceCube-Gen2

The IceCube-Gen2 Neutrino Observatory is proposed to extend the all-flavour energy range of IceCube beyond PeV energies. It will comprise two key components: I) An enlarged 8km3 in-ice optical Cherenkov array to measure the continuation of the IceCube astrophysical neutrino flux and improve IceCube\u27s point source sensitivity above ∼100TeV; and II) A very large in-ice radio array with a surface area of about 500km2. Radio waves propagate through ice with a kilometer-long attenuation length, hence a sparse radio array allows us to instrument a huge volume of ice to achieve a sufficient sensitivity to detect neutrinos with energies above tens of PeV. The different signal topologies for neutrino-induced events measured by the optical and in-ice radio detector - the radio detector is mostly sensitive to the cascades produced in the neutrino interaction, while the optical detector can detect long-ranging muon and tau leptons with high accuracy - yield highly complementary information. When detected in coincidence, these signals will allow us to reconstruct the neutrino energy and arrival direction with high fidelity. Furthermore, if events are detected in coincidence with a sufficient rate, they resemble the unique opportunity to study systematic uncertainties and to cross-calibrate both detector components

Direction reconstruction performance for IceCube-Gen2 Radio

The IceCube-Gen2 facility will extend the energy range of IceCube to ultra-high energies. The key component to detect neutrinos with energies above 10 PeV is a large array of in-ice radio detectors. In previous work, direction reconstruction algorithms using the forward-folding technique have been developed for both shallow (≲20 m) and deep in-ice detectors, and have also been successfully used to reconstruct cosmic rays with ARIANNA. Here, we focus on the reconstruction algorithm for the deep in-ice detector, which was recently introduced in the context of the Radio Neutrino Observatory in Greenland (RNO-G)