Solution-Processable Graphene Oxide as an Efficient Hole Injection Layer for High Luminance Organic Light-Emitting Diodes

The application of solution-processable graphene oxide (GO) as hole injection layer in organic light-emitting diodes (OLEDs) is demonstrated. High luminance of over 53,000 cd m-2 is obtained at only 10 V. The results will unlock a route of applying GO in flexible OLEDs and other electrode applications.Comment: 14 pages, 3 figures, 1 tabl

Dramatic reductions in water uptake observed in novel POSS nanocomposites based on anhydride-cured epoxy matrix resins

© 2015.A methylnadic anhydride-cured diglycidylether of bisphenol A, is prepared and characterised and a mono-epoxy POSS reagent added (0.5-4wt-%) to produce a series of nanocomposites. Two reaction mechanisms are observed involving esterification at lower temperatures (60-180°C) and etherification at temperatures above 180°C. Using the Ozawa and Kissinger methods, the activation energy for the first reaction was found to be 87-90kJ/mol and 122-124kJ/mol for the second reaction. Incorporation of POSS into the epoxy-anhydride network increases the Tg and cross-link density, indicating a more rigid network, but the values do not follow a trend based solely on POSS content. The char yield increases with POSS content with very little change in the degradation temperature. Incorporation of POSS (1wt-%) can reduce the moisture uptake in the cured resin by ~25% at 75% relative humidity. This is accompanied by a lower impact on glass transition temperature: the Tg is reduced by 10K at saturation, compared with 31K for the unmodified epoxy

Design of double-walled carbon nanotubes for biomedical applications

Double-walled carbon nanotubes (DWNTs) prepared by catalytic chemical vapour deposition were functionalized in such a way that they were optimally designed as a nano-vector for the delivery of small interfering RNA (siRNA), which is of great interest for biomedical research and drug development. DWNTs were initially oxidized and coated with a polypeptide (Poly(Lys:Phe)), which was then conjugated to thiol-modified siRNA using a heterobifunctional cross-linker. The obtained oxDWNT–siRNA was characterized by Raman spectroscopy inside and outside a biological environment (mammalian cells). Uptake of the custom designed nanotubes was not associated with detectable biochemical perturbations in cultured cells, but transfection of cells with DWNTs loaded with siRNA targeting the green fluorescent protein (GFP) gene, serving as a model system, as well as with therapeutic siRNA targeting the survivin gene, led to a significant gene silencing effect, and in the latter case a resulting apoptotic effect in cancer cells

Novel Tunnel-Contact-Controlled IGZO Thin-Film Transistors with High Tolerance to Geometrical Variability.

Thin insulating layers are used to modulate a depletion region at the source of a thin-film transistor. Bottom contact, staggered-electrode indium gallium zinc oxide transistors with a 3 nm Al2 O3 layer between the semiconductor and Ni source/drain contacts, show behaviors typical of source-gated transistors (SGTs): low saturation voltage (VD_SAT ≈ 3 V), change in VD_SAT with a gate voltage of only 0.12 V V-1 , and flat saturated output characteristics (small dependence of drain current on drain voltage). The transistors show high tolerance to geometry: the saturated current changes only 0.15× for 2-50 µm channels and 2× for 9-45 µm source-gate overlaps. A higher than expected (5×) increase in drain current for a 30 K change in temperature, similar to Schottky-contact SGTs, underlines a more complex device operation than previously theorized. Optimization for increasing intrinsic gain and reducing temperature effects is discussed. These devices complete the portfolio of contact-controlled transistors, comprising devices with Schottky contacts, bulk barrier, or heterojunctions, and now, tunneling insulating layers. The findings should also apply to nanowire transistors, leading to new low-power, robust design approaches as large-scale fabrication techniques with sub-nanometer control mature

Microscopic insight into the bilateral formation of carbon spirals from a symmetric iron core

Mirrored carbon-spirals have been produced from pressured ferrocene via the bilateral extrusion of the spiral pairs from an iron core. A parametric plot of the surface geometry displays the fractal growth of the conical helix made with the logarithmic spiral. Electron microscopy studies show the core is a crystalline cementite which grows and transforms its shape from spherical to biconical as it extrudes two spiralling carbon arms. In a cross section along the arms we observe graphitic flakes arranged in a herringbone structure, normal to which defects propagate. Local-wave-pattern analysis reveals nanoscale defect patterns of two-fold symmetry around the core. The data suggest that the bilateral growth originates from a globular cementite crystal with molten surfaces and the nano-defects shape emerging hexagonal carbon into a fractal structure. Understanding and knowledge obtained provide a basis for the controlled production of advanced carbon materials with designed geometries