A new technique for oil backstreaming contamination measurements

Due to the large size and the number of diffusion pumps, space simulation chambers cannot be easily calibrated by the usual test dome method for measuring backstreaming from oil diffusion pumps. In addition, location dependent contamination may be an important parameter of the test. The backstreaming contamination was measured in the Space Power Facility (SPF) near Sandusky, OH, the largest space simulation vacuum test chamber in the U.S.. Small clean silicon wafers placed at all desired measurement sites were used as contamination sensors. The facility used diffusion pumps with DC 705 oil. The thickness of the contamination oil film was measured using ellipsometry. Since the oil did not wet the silicon substrate uniformly, two analysis models were developed to measure the oil film: (1) continuous, homogeneous film; and (2) islands of oil with the islands varying in coverage fraction and height. In both cases, the contamination film refractive index was assumed to be that of DC 705. The second model improved the ellipsometric analysis quality parameter by up to two orders of magnitude, especially for the low coverage cases. Comparison of the two models shows that the continuous film model overestimates the oil volume by less than 50 percent. Absolute numbers for backstreaming are in good agreement with published results for diffusion pumps. Good agreement was also found between the ellipsometric results and measurements done by x-ray photoelectron spectroscopy (XPS) and by scanning electron microscopy (SEM) on examples exposed to the same vacuum runs

Ellipsometric study of InGaAs MODFET material

In(x)Ga(1-x)As based MODFET (modulation doped field effect transistor) material was grown by molecular beam epitaxy on semi-insulating InP substrates. Several structures were made, including lattice matched and strained layer InGaAs. All structures also included several layers of In(0.52)Al(0.48)As. Variable angle spectroscopic ellipsometry was used to characterize the structures. The experimental data, together with the calibration function for the constituent materials, were analyzed to yield the thickness of all the layers of the MODFET structure. Results of the ellipsometrically determined thicknesses compare very well with the reflection high energy electron diffraction in situ thickness measurements

Dielectric function of InGaAs in the visible

Measurements are reported of the dielectric function of thermodynamically stable In(x)Ga(1-x)As in the composition range 0.3 equal to or less than X = to or less than 0.7. The optically thick samples of InGaAs were made by molecular beam epitaxy (MBE) in the range 0.4 = to or less than X = to or less than 0.7 and by metal-organic chemical vapor deposition (MOCVD) for X = 0.3. The MBE made samples, usually 1 micron thick, were grown on semi-insulating InP and included a strain release structure. The MOCVD sample was grown on GaAs and was 2 microns thick. The dielectric functions were measured by variable angle spectroscopic ellipsometry in the range 1.55 to 4.4 eV. The data was analyzed assuming an optically thick InGaAs material with an oxide layer on top. The thickness of this layer was estimated by comparing the results for the InP lattice matched material, i.e., X = 0.53, with results published in the literature. The top oxide layer mathematically for X = 0.3 and X = 0.53 was removed to get the dielectric function of the bare InGaAs. In addition, the dielectric function of GaAs in vacuum, after a protective arsenic layer was removed. The dielectric functions for X = 0, 0.3, and 0.53 together with the X = 1 result from the literature to evaluate an algorithm for calculating the dielectric function of InGaAs for an arbitrary value of X(0 = to or less than X = to or less than 1) were used. Results of the dielectric function calculated using the algorithm were compared with experimental data

Study of InGaAs based MODFET structures using variable angle spectroscopic ellipsometry

Variable angle spectroscopic ellipsometry was used to estimate the thicknesses of all layers within the optical penetration depth of InGaAs based MODFET structures. Strained and unstrained InGaAs channels were made by MBE on InP substrates and by MOCVD on GaAs substrates. In most cases, ellipsometrically determined thicknesses were within 10 percent of the growth calibration results. The MBE made InGaAs strained layers showed large strain effects, indicating a probable shift in the critical points of their dielectric function toward the InP lattice matched concentration

Adding flavour to the Polchinski-Strassler background

As an extension of holography with flavour, we analyze in detail the embedding of a D7-brane probe into the Polchinski-Strassler gravity background, in which the breaking of conformal symmetry is induced by a 3-form flux G_3. This corresponds to giving masses to the adjoint chiral multiplets. We consider the N=2 supersymmetric case in which one of the adjoint chiral multiplets is kept massless while the masses of the other two are equal. This setup requires a generalization of the known expressions for the backreaction of G_3 in the case of three equal masses to generic mass values. We work to second order in the masses to obtain the embedding of D7-brane probes in the background. At this order, the 2-form potentials corresponding to the background flux induce an 8-form potential which couples to the worldvolume of the D7-branes. We show that the embeddings preserve an SU(2) x SU(2) symmetry. We study possible embeddings both analytically in a particular approximation, as well as numerically. The embeddings preserve supersymmetry, as we investigate using the approach of holographic renormalization. The meson spectrum associated to one of the embeddings found reflects the presence of the adjoint masses by displaying a mass gap.Comment: LaTeX, 50 pages, 9 figure

Managing diabetes through the skin:Diagnostic devices

Gold-doped graphene combined with a bilayer gold mesh and polymeric microneedles forms a wearable sweat-based patch for real-time monitoring of glucose levels and controlled drug delivery

Holographic Nuclear Physics

We analyze the phases of the Sakai-Sugimoto model at finite temperature and baryon chemical potential. Baryonic matter is represented either by 4-branes in the 8-branes or by strings stretched from the 8-branes to the horizon. We find the explicit configurations and use them to determine the phase diagram and equation of state of the model. The 4-brane configuration (nuclear matter) is always preferred to the string configuration (quark matter), and the latter is also unstable to density fluctuations. In the deconfined phase the phase diagram has three regions corresponding to the vacuum, quark-gluon plasma, and nuclear matter, with a first-order and a second-order phase transition separating the phases. We find that for a large baryon number density, and at low temperatures, the dominant phase has broken chiral symmetry. This is in qualitative agreement with studies of QCD at high density.Comment: 27 pages, 26 figures. v2: Added a comment about higher derivative corrections to the DBI action in the smeared instanton in section 2.1. v3: References added, version published in JHEP. v4: misprints correcte

Localized Backreacted Flavor Branes in Holographic QCD

We investigate the perturbative (in $g_s N_{D8}$) backreaction of localized D8 branes in D4-D8 systems including in particular the Sakai Sugimoto model. We write down the explicit expressions of the backreacted metric, dilaton and RR form. We find that the backreaction remains small up to a radial value of $u \ll \ell_s/(g_s N_{D8})$, and that the background functions are smooth except at the D8 sources. In this perturbative window, the original embedding remains a solution to the equations of motion. Furthermore, the fluctuations around the original embedding, describing scalar mesons, do not become tachyonic due to the backreaction in the perturbative regime. This is is due to a cancelation between the DBI and CS parts of the D8 brane action in the perturbed background.Comment: 1+48 pages (7 figures) + 15 pages, citations added & minor correction

Characterization of aluminum, aluminum oxide and titanium dioxide nanomaterials using a combination of methods for particle surface and size analysis

International audienceThe application of appropriate analytical techniques is essential for nanomaterial (NM) characterization. In this study, we compared different analytical techniques for NM analysis. Regarding possible adverse health effects, ionic and particulate NM effects have to be taken into account. As NMs behave quite differently in physiological media, special attention was paid to techniques which are able to determine the biosolubility and complexation behavior of NMs. Representative NMs of similar size were selected: aluminum (Al 0) and aluminum oxide (Al 2 O 3), to compare the behavior of metal and metal oxides. In addition, titanium dioxide (TiO 2) was investigated. Characterization techniques such as dynamic light scattering (DLS) and nanoparticle tracking analysis (NTA) were evaluated with respect to their suitability for fast characterization of nanoparticle dispersions regarding a particle's hydrodynamic diameter and size distribution. By application of inductively coupled plasma mass spectrometry in the single particle mode (SP-ICP-MS), individual nanoparticles were quantified and characterized regarding their size. SP-ICP-MS measurements were correlated with the information gained using other characterization techniques, i.e. transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS). The particle surface as an important descriptor of NMs was analyzed by X-ray diffraction (XRD). NM impurities and their co-localization with biomolecules were determined by ion beam microscopy (IBM) and confocal Raman microscopy (CRM). We conclude advantages and disadvantages of the different techniques applied and suggest options for their complementation. Thus, this paper may serve as a practical guide to particle characterization techniques

Mesons in marginally deformed AdS/CFT

We study the embedding of spacetime filling D7-branes in beta-deformed backgrounds which, according to the AdS/CFT dictionary, corresponds to flavoring beta-deformed N=4 super Yang-Mills. We consider supersymmetric and more general non-supersymmetric three parameter deformations. The equations of motion for quadratic fluctuations of a probe D7-brane wrapped on a deformed three-sphere exhibit a non-trivial coupling between scalar and vector modes induced by the deformation. Nevertheless, we manage to solve them analytically and find that the mesonic mass spectrum is discrete, with a mass gap and a Zeeman-like splitting occurs. Finally we propose the action for the dual field theory as obtained by star-product deformation of super Yang-Mills with fundamental matter.Comment: LaTex, 42 pages, 3 figures, uses JHEP