The capability of capacitive sensors in the monitoring relative humidity in hypogeum environments

Hypogeum environments are characterized by high levels of relative humidity (RH). Most humidity sensors currently in use are based on the capacitive effect of the dielectric material to change according to water vapour uptake. In hypogeum environments the dielectric material can be saturated by water vapor, implying a significant error in the RH measurement. To improve the capacity of this type of humidity sensors, a modified hygrometer capacitive sensor, which uses a heating cycle to avoid the condensation, has been recently developed by Rotronic®. During four field campaigns in two different hypogea environments (the Monkey Tomb in Siena and the Mithreum of Caracalla Baths in Rome), RH was measured using the conventional capacitive sensor (CCS) and the heated capacitive sensor (HCS). The purpose of this study was to investigate the capability of HCS to detect RH variations when the environmental conditions were close to vapor saturation. Significant differences were found between the measurements of the two sensors: when RH was close to 100%, the CCS was not able to detect the RH decrease, giving only a measure of RH=100%, while HCS detected such a RH decrease. Therefore, these results encourage the use of HCS in the monitoring of RH levels in extreme humidity sites such as hypogea sites

Introduction

Introduzione a una raccolta di saggi sull'autonomia nelle riflessioni di filosofe

CleAir monitoring system for particulate matter. A case in the Napoleonic Museum in Rome

Monitoring the air particulate concentration both outdoors and indoors is becoming a more relevant issue in the past few decades. An innovative, fully automatic, monitoring system called CleAir is presented. Such a system wants to go beyond the traditional technique (gravimetric analysis), allowing for a double monitoring approach: the traditional gravimetric analysis as well as the optical spectroscopic analysis of the scattering on the same filters in steady-state conditions. The experimental data are interpreted in terms of light percolation through highly scattering matter by means of the stretched exponential evolution. CleAir has been applied to investigate the daily distribution of particulate matter within the Napoleonic Museum in Rome as a test case

Genetic variants of Y chromosome are associated with a protective lipid profile in black men

Objective— Gender and ethnicity modulate the phenotypic expression of cardiovascular risk factors. In particular, men are at higher risk of developing cardiovascular diseases compared to women, whereas black populations of African origin display reduced mortality from coronary heart disease (CHD) as compared to both whites and South Asians. Because the male-specific region (MSY) of the human Y chromosome is an obvious candidate for gender-related differences in the development of cardiovascular diseases, we aimed to identify genetic variants of MSY influencing cardiovascular risk profile in different ethnic groups. Methods and Results— We genotyped 4 polymorphisms of MSY (HindIII±, rs768983 of TBL1Y, rs3212292 of USP9Y, and rs9341273 of UTY genes) in 579 men of different ethnic groups (blacks, South Asians, and whites) from UK and in 301 whites in Italy. We found that the TBL1YA USP9YA haplotype, present only in blacks in whom it represents the most frequent allelic combinations (AA: n=125; all other combinations: n=45), was associated with lower levels of triglycerides (P=0.025) and higher levels of HDL-cholesterol (P=0.005) as compared to the other haplotypes. Conclusion— The TBL1YA USP9YA haplotype of the Y chromosome, present only in black people of African origin, attributes a favorable lipoprotein pattern, likely to contribute to their reduced susceptibility to coronary heart disease. The study evaluated the association of genetic variants of the male-specific region of the Y chromosome with cardiovascular risk factors in different ethnic groups. The most frequently observed haplotype in black people was associated with a favorable lipoprotein pattern, thus contributing to the lower rate of cardiovascular diseases in blacks

Real‐life research projects improve student engagement and provide reliable data for academics

Student engagement can have a positive influence on student success. Many methods exist for fostering engagement but tend to be generic and require tailoring to specific contexts, subjects, and students. In the case of undergraduate science students, practical classes are a popular tool for increasing engagement. However, despite strong potential for improvement via links with “real life” research projects (RLRPs), few academic staff incorporate research participation with teaching activities. This is potentially due to poor time availability and low opinions of students' ability to collect reliable data. This study aims to examine whether involvement with RLRPs can generate reliable scientific data and also act as a motivational tool for engaging tertiary science students. A preexisting core activity for first‐year biology and marine biology students was modified to include a short RLRP component. Student‐based data collection and a questionnaire about experiences were used to examine the reliability of student‐collected data and student perceptions of RLRPs. Results indicated that error rate in student‐collected data was minimal. Irrespective of participating in a “normal” practical class or a class with a RLRP component, students collected equally accurate data. However, when the topic aligned specifically with their degree subject, student accuracy was higher. All students surveyed reported high motivation with the idea of RLRP participation, placing high importance on this from an educational and employability perspective. Yet, students were not confident about participating in RLRPs until they had engaged with one, suggesting that introducing such projects into taught sessions early‐on may encourage students to seek further opportunities in the future. In conclusion, incorporating RLRPs into the curriculum of undergraduate science courses has considerable potential benefits for both students and academic staff

Performance assessment of hygrothermal modelling for diagnostics and conservation in an Italian historical church

The hygrothermal modelling of historical churches is a promising approach to study preservation issues and suitable retrofit measures. However, difficulties can arise in the use of Heat, Air and Moisture (HAM) models, which are often customised objects to be integrated into validated building energy simulation (BES). This research outlines a multi-step methodology to investigate the capability of a BES software coupled with a HAM model (BES + HAM) as a technique for diagnostics and conservation in complex settings. The 17th-century church of Santa Rosalia (Italy) was used as a historical site in a real context. As first step, the performance of the simulation tool was analysed through standardised exercises aiming at excluding incorrect assumptions and calculations in the HAM model (HMWall). Secondly, a building model of the church using a 1D heat transfer model (named building model A) was compared with one using HMWall (named building model B) in terms of the accuracy of the indoor climate simulations against hygrothermal measurements. The results showed that building model B enhanced the simulation accuracy by +50% with respect to building model A. Finally, annual simulations inside the church were run to further compare the seasonal trends of indoor climate scenario obtained from the two building models. Building model B allowed to study the water content distribution inside the altarpiece and a wall partition, showing that BES + HAM tools can be used to identify potential moisture-induced conservation risks

Systematic review and meta-analysis of randomised controlled trials on the effects of potassium supplements on serum potassium and creatinine

Objectives: High potassium intake could prevent stroke, but supplementation is considered hazardous. We assessed the effect of oral potassium supplementation on serum or plasma potassium levels and renal function. Setting: We updated a systematic review of the effects of potassium supplementation in randomised clinical trials carried out worldwide, published in 2013, extending it to July 2015. We followed the PRISMA guidelines. Participants: Any individual taking part in a potassium supplementation randomised clinical trial. Studies included met the following criteria: randomised clinical trials, potassium supplement given and circulating potassium levels reported. Intervention: Oral potassium supplementation. Primary outcome measures: Serum or plasma potassium and serum or plasma creatinine. Results: A total of 20 trials (21 independent groups) were included (1216 participants from 12 different countries). All but 2 were controlled (placebo n=16, control n=2). Of these trials, 15 were crossover, 4 had a parallel group and 1 was sequential. The duration of supplementation varied from 2 to 24 weeks and the amount of potassium given from 22 to 140 mmol/day. In the pooled analysis, potassium supplementation caused a small but significant increase in circulating potassium levels (weighted mean difference (WMD) 0.14 mmol/L, 95% CI 0.09 to 0.19, p<1×10−5), not associated with dose or duration of treatment. The average increase in urinary potassium excretion was 45.75 mmol/24 hours, 95% CI 38.81 to 53.69, p<1×10−5. Potassium supplementation did not cause any change in circulating creatinine levels (WMD 0.30 µmol/L, 95% CI −1.19 to 1.78, p=0.70). Conclusions: In short-term studies of relatively healthy persons, a moderate oral potassium supplement resulted in a small increase in circulating potassium levels and no change in renal function

Ground-based NO2 measurements at the Italian Brewer stations: A pilot study with Global Ozone Monitoring Experiment (GOME)

Ground-based NO2 total column measurements have been collected since 1992 using Brewer spectrophotometry at Rome, an urban site, and Ispra (semirural). These are the only ground-based stations regularly monitoring NO2 in Italy. The methodology of measurement together with the procedure to control its quality is described. From the analysis of the time series it was found that the mean value of the NO2 column is 1.63 DU atRome and 1.60 DU atIspra. A firstat tempt to compare NO2 vertical column densities (VCD) from GOME with those derived from ground-based Brewer measurements, under different atmospheric conditions and measurement time lags is here presented. The results of this pilot study showed unsatisfactory agreement because different atmospheres are probed by GOME and Brewer instruments. The GOME space resolution resulted insufficient to fully characterize the Rome and Ispra highly localized polluted areas

Ground-based NO2 measurements at the Italian Brewer stations: A pilot study with Global Ozone Monitoring Experiment (GOME)

Ground-based NO2 total column measurements have been collected since 1992 using Brewer spectrophotometry at Rome, an urban site, and Ispra (semirural). These are the only ground-based stations regularly monitoring NO2 in Italy. The methodology of measurement together with the procedure to control its quality is described. From the analysis of the time series it was found that the mean value of the NO2 column is 1.63 DU atRome and 1.60 DU atIspra. A firstat tempt to compare NO2 vertical column densities (VCD) from GOME with those derived from ground-based Brewer measurements, under different atmospheric conditions and measurement time lags is here presented. The results of this pilot study showed unsatisfactory agreement because different atmospheres are probed by GOME and Brewer instruments. The GOME space resolution resulted insufficient to fully characterize the Rome and Ispra highly localized polluted areas