43 research outputs found
A real-time nonlinear MPC for extreme lateral stabilization of passenger vehicles
Loss of lateral stability remains a major cause of road accidents in recent years. Further improvement of passenger vehicle's active safety requires a more efficient utilization of the tire-road friction. Nonlinear model predictive control (NMPC) is expected to fulfill such a role, as the nonlinear characteristics of the vehicle are included and the control input is optimized. However, the computational load can be excessive for onboard hardware, which hinders the NMPC from practical implementation. To tackle the problem, this study proposes a method to improve the computational efficiency in NMPC. The proposed solution consists of an explicitly stored look-up table for generating initial guesses and an online optimization component. The look-up table is based on the offline solution of a hybrid MPC controller. Through the simulation with multibody vehicle model, impressive control performance has been observed, as the vehicle can be stabilized from a side-slip angle of up to 0.5 rad.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Intelligent Vehicle
Tire Model with Temperature Effects for Formula SAE Vehicle
Formula Society of Automotive Engineers (SAE) (FSAE) is a student design competition organized by SAE International (previously known as the Society of Automotive Engineers, SAE). Commonly, the student team performs a lap simulation as a point mass, bicycle or planar model of vehicle dynamics allow for the design of a top-level concept of the FSAE vehicle. However, to design different FSAE components, a full vehicle simulation is required including a comprehensive tire model. In the proposed study, the different tires of a FSAE vehicle were tested at a track to parametrize the tire based on the empirical approach commonly known as the magic formula. A thermal tire model was proposed to describe the tread, carcass, and inflation gas temperatures. The magic formula was modified to incorporate the temperature effect on the force capability of a FSAE tire to achieve higher accuracy in the simulation environment. Considering the model validation, the several maneuvers, typical for FSAE competitions, were performed. A skidpad and full lap maneuvers were chosen to simulate steady-state and transient behavior of the FSAE vehicle. The full vehicle simulation results demonstrated a high correlation to the measurement data for steady-state maneuvers and limited accuracy in highly dynamic driving. In addition, the results show that neglecting temperature in the tire model results in higher root mean square error (RMSE) of lateral acceleration and yaw rate.Intelligent Vehicle
Vehicle Dynamics Control Using Model Predictive Control Allocation Combined with an Adaptive Parameter Estimator
Advanced passenger vehicles are complex dynamic systems that are equipped with several actuators, possibly including differential braking, active steering, and semi-active or active suspensions. The simultaneous use of several actuators for integrated vehicle motion control has been a topic of great interest in literature. To facilitate this, a technique known as control allocation (CA) has been employed. CA is a technique that enables the coordination of various actuators of a system. One of the main challenges in the study of CA has been the representation of actuator dynamics in the optimal CA problem (OCAP). Using model predictive control allocation (MPCA), this problem has been addressed. Furthermore, the actual dynamics of actuators may vary over the lifespan of the system due to factors such as wear, lack of maintenance, etc. Therefore, it is further required to compensate for any mismatches between the actual actuator parameters and those used in the OCAP. This is done by combining the MPCA solver with an online adaptive parameter estimation (APE) algorithm. In this study, an advanced solution to the OCAP is proposed by combining MPCA with APE. This solution coordinates differential braking and active front steering (AFS) of a passenger vehicle, to stabilize the lateral and yaw motion. The simulation results indicate that the APE+MPCA combination effectively accounts for actuator dynamics and actuator parameter mismatches.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Intelligent Vehicle
Mitigating Motion Sickness with Optimization-Based Motion Planning
The acceptance of automated driving is under the potential threat of motion sickness. It hinders the passengers' willingness to perform secondary activities. In order to mitigate motion sickness in automated vehicles, we propose an optimization-based motion planning algorithm that minimizes the distribution of acceleration energy within the frequency range that is found to be the most nauseogenic. The algorithm is formulated into integral and receding-horizon variants and compared with a commonly used alternative approach aiming to minimize accelerations in general. The proposed approach can reduce frequency-weighted acceleration by up to 11.3% compared with not considering the frequency sensitivity for the price of reduced overall acceleration comfort. Our simulation studies also reveal a loss of performance by the receding-horizon approach over the integral approach when varying the preview time and nominal sampling time. The computation time of the receding-horizon planner is around or below the real-time threshold when using a longer sampling time but without causing significant performance loss. We also present the results of experiments conducted to measure the performance of human drivers on a public road section that the simulated scenario is actually based on. The proposed method can achieve a 19% improvement in general acceleration comfort or a 32% reduction in squared motion sickness dose value over the best-performing participant. The results demonstrate considerable potential for improving motion comfort and mitigating motion sickness using our approach in automated vehicles.Intelligent VehiclesTeam Tamas Keviczk
3DOP: Comfort-oriented Motion Planning for Automated Vehicles with Active Suspensions
Motion comfort is the basis of many societal benefits promised by automated driving and motion planning is primarily responsible for this. By planning the spatial trajectory and the velocity profile, motion planners can significantly enhance motion comfort, ideally without sacrificing time efficiency. Active suspensions can push the boundary further by enabling additional degrees of freedom in the controllable vehicle motions. In this paper, we propose to integrate the planning of roll motion into an optimization-based motion planning algorithm called 3DOP(3 Degrees-of-Freedom Optimal Planning), where the conflicting objectives of comfort and time efficiency are optimized. The feasibility of the planned motion is verified in a realistic simulation environment, where feedforward-proportional control suffices to track the speed, path, and roll references. The proposed scheme achieves a significant reduction of motion discomfort, namely by up to 28.1% over the variant without controllable roll motion, or up to 34.2% over an acceleration-bounded driver model. The results suggest considerable potential for improving motion comfort by equipping automated vehicles with active suspensions.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Intelligent VehiclesTeam Tamas Keviczk
A model-based approach for the estimation of bearing forces and moments using outer-ring deformation
Bearing load estimation would form a valuable addition to the fields of condition monitoring and system control. Despite effort spend on its development by all major bearing manufacturers no product solution has come to market yet. This can be attributed to both the complexity in conditioning of the strain measurement as well as its non-linearity with respect to the bearing loading. To address these issues, this paper proposes a novel approach based on modeling of the physical behavior of the bearing. An Extended Kalman Filter including a novel strain model is applied for signal conditioning whereas an Unscented Kalman Filter including a semi-analytical bearing model is proposed for reconstruction of the bearing load. An experimental study in both laboratory and field conditions shows that the proposed cascaded Kalman filtering approach leads to accurate estimates for all four considered bearings loads in various loading conditions. Besides an improvement on accuracy, the novel approach leads to a reduction in calibration effort.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Intelligent VehiclesTeam Michel Verhaege
Comfort and Time Efficiency: A Roundabout Case Study
The public acceptance of automated driving is influenced by multiple factors. Apart from safety being of top priority, comfort and time efficiency also have an impact on the popularity of automated vehicles. These two factors contradict each other as optimizing for one results in the degradation of the other. We investigate in this paper how such a multiobjective problem is approached by human drivers and by numerical optimization in the roundabout scenario, which is compact in size but complex to handle. The human drivers' behavior is first observed using naturalistic driving data. The average trajectories and distribution of peak accelerations were extracted after model-based fitting and removal of erroneous samples. The processed data is shared online as an open-access dataset. Then, an optimization problem is formulated and solved to find the numerically optimal motion profile in terms of comfort and time efficiency. The weighted sum of travel time and discomfort is minimized. By adjusting the weight distribution, we present different motion profiles favoring optimal comfort, human-like acceleration magnitudes, and agility, respectively.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Intelligent VehiclesTeam Tamas Keviczk
A semi-analytical bearing model considering outer race flexibility for model based bearing load monitoring
This paper proposes a novel semi-analytical bearing model addressing flexibility of the bearing outer race structure. It furthermore presents the application of this model in a bearing load condition monitoring approach. The bearing model is developed as current computational low cost bearing models fail to provide an accurate description of the more and more common flexible size and weight optimized bearing designs due to their assumptions of rigidity. In the proposed bearing model raceway flexibility is described by the use of static deformation shapes. The excitation of the deformation shapes is calculated based on the modelled rolling element loads and a Fourier series based compliance approximation. The resulting model is computational low cost and provides an accurate description of the rolling element loads for flexible outer raceway structures. The latter is validated by a simulation-based comparison study with a well-established bearing simulation software tool. An experimental study finally shows the potential of the proposed model in a bearing load monitoring approach.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Intelligent VehiclesIntelligent Vehicles & Cognitive Robotic
3DOP: Comfort-oriented Motion Planning for Automated Vehicles with Active Suspensions
Motion comfort is the basis of many societal benefits promised by automated driving and motion planning is primarily responsible for this. By planning the spatial trajectory and the velocity profile, motion planners can significantly enhance motion comfort, ideally without sacrificing time efficiency. Active suspensions can push the boundary further by enabling additional degrees of freedom in the controllable vehicle motions. In this paper, we propose to integrate the planning of roll motion into an optimization-based motion planning algorithm called 3DOP(3 Degrees-of-Freedom Optimal Planning), where the conflicting objectives of comfort and time efficiency are optimized. The feasibility of the planned motion is verified in a realistic simulation environment, where feedforward-proportional control suffices to track the speed, path, and roll references. The proposed scheme achieves a significant reduction of motion discomfort, namely by up to 28.1% over the variant without controllable roll motion, or up to 34.2% over an acceleration-bounded driver model. The results suggest considerable potential for improving motion comfort by equipping automated vehicles with active suspensions.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Intelligent VehiclesTeam Tamas Keviczk
Letter from the Special Issue Editors: Special Issue on Enhancing Motion Comfort on Passenger and Commercial Autonomous Vehicles for Securing Their Acceptance
Intelligent Vehicle