Locally-applied 5-fluorouracil-loaded slow-release patch prevents pancreatic cancer growth in an orthotopic mouse model

To obtain improved efficacy against pancreatic cancer, we investigated the efficacy and safety of a locally-applied 5-fluorouracil (5-FU)-loaded polymeric patch on pancreatic tumors in an orthotopic nude-mouse model. The 5-FU-releasing polymeric patch was produced by 3D printing. After application of the patch, it released the drug slowly for 4 weeks, and suppressed BxPC-3 pancreas cancer growth. Luciferase imaging of BxPC3-Luc cells implanted in the pancreas was performed longitudinally. The drug patch delivered a 30.2 times higher level of 5-FU than an intra-peritoneal (i.p.) bolus injection on day-1. High 5-FU levels were accumulated within one week by the patch. Four groups were compared for efficacy of 5-FU. Drug-free patch as a negative control (Group I); 30% 5-FU-loaded patch (4.8 mg) (Group II); 5-FU i.p. once (4.8 mg) (Group III); 5-FU i.p. once a week (1.2 mg), three times (Group IV). The tumor growth rate was significantly faster in Group I than Group II, III, IV (p=0.047 at day-8, p=0.022 at day-12, p=0.002 at day-18 and p=0.034 at day-21). All mice in Group III died of drug toxicity within two weeks after injection. Group II showed more effective suppression of tumor growth than Group IV (p=0.018 at day-12 and p=0.017 at day-21). Histological analysis showed extensive apoptosis in the TUNEL assay and by Ki -67 staining. Western blotting confirmed strong expression of cleaved caspase-3 in Group II. No significant changes were found hematologically and histologically in the liver, kidney and spleen in Groups I, II, IV but were found in Group III.113Ysciescopu

Effect of immobilized cell-binding peptides on chitosan membranes for osteoblastic differentiation of mesenchymal stem cells

Two cell-binding domains from FGF-2 (fibroblast growth factor-2) were shown to increase cell attachment and osteoblastic differentiation. Two synthetic peptides derived from FGF-2, namely residues 36-41 (F36; PDGRVD) and 77-83 (F77; KEDGRLL), were prepared and their N-termini further modified for ease of surface immobilization. Chitosan membranes were used in the present study as mechanical supportive biomaterials for peptide immobilization. Peptides could be stably immobilized on to the surface of chitosan membranes. The adhesion of mesenchymal stem cells to the peptide (F36 and F77)-immobilized chitosan membrane was increased in a dose-dependent manner and completely inhibited by soluble RGD (Arg-Gly-Asp) and anti-integrin antibody, indicating the existence of an interaction between F36/F77 and integrin. Peptide-immobilized chitosan supported human bone-marrow-derived mesenchymal-stem-cell differentiation into osteoblastic cells, as demonstrated by alkaline phosphate expression and mineralization. Taken together, the identified peptide-immobilized chitosan membranes were able to support cell adhesion and osteoblastic differentiation; thus these peptides might be useful as bioactive agents for osteoblastic differentiation and surface-modification tools in bone regenerative therapy.This study was supported in part by the KOSEF (Korea Science and Technology Foundation) Nanobiotechnology Development Program [no. 2007-00952] entitled Regenomics (innovative surface activation of regenerative biomaterials), in part by the Korea Research Foundation [grant no. D00192] and in part by an Engineering Research Center grant from KOSEF through the IBEC (Intelligent Biointerface Engineering Center) [grant no. R11-2000-084-09001-0]

Development of Pancreatic Construct for Type 1 Diabetes by 3D cell Printing Technology

2

Evaluation of Multi-Layered Pancreatic Islets and Adipose-Derived Stem Cell Sheets Transplanted on Various Sites for Diabetes Treatment

Islet cell transplantation is considered an ideal treatment for insulin-deficient diabetes, but implantation sites are limited and show low graft survival. Cell sheet technology and adipose-derived stem cells (ADSCs) can be useful tools for improving islet cell transplantation outcomes since both can increase implantation efficacy and graft survival. Herein, the optimal transplantation site in diabetic mice was investigated using islets and stem cell sheets. We constructed multi-layered cell sheets using rat/human islets and human ADSCs. Cell sheets were fabricated using temperature-responsive culture dishes. Islet/ADSC sheet (AI sheet) group showed higher viability and glucose-stimulated insulin secretion than islet-only group. Compared to islet transplantation alone, subcutaneous AI sheet transplantation showed better blood glucose control and CD31+ vascular traits. Because of the adhesive properties of cell sheets, AI sheets were easily applied on liver and peritoneal surfaces. Liver or peritoneal surface grafts showed better glucose control, weight gain, and intraperitoneal glucose tolerance test (IPGTT) profiles than subcutaneous site grafts using both rat and human islets. Stem cell sheets increased the therapeutic efficacy of islets in vivo because mesenchymal stem cells enhance islet function and induce neovascularization around transplanted islets. The liver and peritoneal surface can be used more effectively than the subcutaneous site in future clinical applications

Healing of articular cartilage defects treated with a novel drug-releasing rod-type implant after microfracture surgery

Microfracture therapy is a widely used technique for the repair of articular cartilage defects because it can be readily performed arthroscopically. However, the regenerated cartilage after microfracture surgery clearly differs from normal articular cartilage. This suggests that the clinical outcome of patients undergoing microfracture therapy could be improved. Dehydroepiandrosterone sulfate (DHEA-S) is known to protect against articular cartilage loss. Therefore, in an effort to achieve cartilage regeneration of high efficacy, we manufactured a DHEA-S-releasing rod-type implant for implantation into the holes produced by microfracture surgery. The polymeric rod-type implant was made of biodegradable poly (D, L-lactide-co-glycolide) (PLGA) and beta-tricalcium phosphate to enable controlled release of DHEA-S. The implant was dip-coated with a dilute PLGA solution to prevent the burst release of DHEA-S. The rod-type implant was sufficiently stiff to permit implantation into the holes made by microfracture. DHEA-S was released from the implant for more than four weeks. Furthermore, eight weeks after implantation into rabbit knees, the implants dramatically enhanced cartilage regeneration compared to control. Moreover, the degradation of the implant over the eight weeks from implantation into the knee did not induce any adverse effects. Therefore, this polymeric rod-type implant does not only provide an improvement in microfracture surgery, but also has great potential as a new formulation for drug delivery

Continuous Inhibition of Sonic Hedgehog Signaling Leads to Differentiation of Human-Induced Pluripotent Stem Cells into Functional Insulin-Producing β Cells

Human-induced pluripotent stem cell- (iPSC-) derived insulin-producing cells (IPCs) can be used for islet cell transplantation into type 1 diabetic patients and as patient-specific cells for the development of novel antidiabetic drugs. However, a method is needed to generate functional IPCs from iPSCs and simplify the protocol. We compared combinations of small molecules that could induce the differentiation of cells into a definitive endoderm and preferentially into islet precursor cells. When generated using an optimal combination of small molecules, IPCs secreted insulin in response to glucose stimulation. We constructed spheroid IPCs and optimized the culture and maturation conditions. Quantitative PCR revealed that the expression of definitive endoderm-specific markers differed depending on the combination of the small molecules. The small molecule, N-[(3,5-dimethyl-1-phenyl-1H-pyrazol-4-yl)methylene]-4-(phenylmethyl)-1-piperazinamine, induced the differentiation of cells into functional IPCs by inhibiting Sonic hedgehog signaling. Images of the 2D culture showed that IPCs formed spheroids from day 5 and continuously secreted insulin. We developed a simple differentiation method using small molecules that produced functional IPCs that responded to glucose stimulation within a relatively short period. We posit that this method along with further refinement of the differentiation process can be applied to culture IPCs that can be used in clinical trials

3D cell printing of implantable vascularized pancreatic construct using tissue-specific bioink and islet for T1D

The transplantation of pancreatic islets is promising treatment for patients of type 1 diabetes, suffering hypoglycaemia and secondary complications. The primary goal of this treatment is to supply sufficient amount of insulin in the bloodstream, however, several limitations still remain. In particular, 60% of the islet graft in the intrahepatic transplant site is difficult to survive due to low engraftment rate and hostile environment [1]. In case of subcutaneous transplantation, the viability and function of the implanted islet is diminished because of the low vascularity occurring hypoxic condition [2]. With the convergence of 3D bioprinting, bioink and stem cell biology approaches, tissue engineering offers a promising alternative. We developed the 3D cell printed pancreatic construct using pdECM and vascular cells that can provide beneficial microenvironmental cues. Thus, this construct can regulate blood glucose level in diabetic animal models and has shown a significant potential of the advanced islet delivery method for the treatment of type 1 diabetes.1