Multifunctional Carbon Nanotube Thin Film Composites by Layer-by-Layer Assembly Technique.

Polymeric layer-by-layer (LBL) assembly offers a pathway for multifunctional / multicomponent materials with molecular-scale control of stratified structures. Among the wide variety nanoscale building blocks such as nanowires and nanodots, single-walled carbon nanotubes (SWNTs) are regarded as one of the most versatile because of their superior mechanical and electrical properties as well as geometrical perfection. In this thesis, LBL assembled SWNT thin film nanocomposites with high mechanical strength/toughness and with high electrical/optical properties are presented. Exceptional exfoliation state of SWNTs and controlled nm-thick layered structures are the basis for achieving tunable physical properties. Highly anisotropic features of SWNTs are translated into 2 dimensional alignments by meniscus combing technique during LBL assemblies. Advanced LBL assemblies by dewetting methods are also introduced, which significantly accelerate the process with improved lateral organization of nanowires. Furthermore, SWNT composite coating on commodity cotton yarns produced intelligent electronic textiles (e-textiles) with intrinsic humidity sensibility. This e-textile has been further combined with antigen/antibody sensing capability in order to develop a selective albumin biosensor which provides a direct route for the application of these materials as wearable biomonitoring and telemedicine sensors.Ph.D.Chemical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/62251/1/bshim_1.pd

Impedimetric Biosensors for Detecting Vascular Endothelial Growth Factor (VEGF) Based on Poly(3,4-ethylene dioxythiophene) (PEDOT)/Gold Nanoparticle (Au NP) Composites

In advanced forms of diabetic retinopathy, retinal vascular occlusive disease and exudative age-related macular degeneration, vision loss is associated with elevated levels or extravasation of vascular endothelial-derived growth factor (VEGF) into the retina, vitreous, and anterior chamber of the eye. We hypothesize that point-of-care biosensors, capable of rapidly and precisely measuring VEGF levels within the eye will assist clinicians in assessing disease severity, and in establishing individualized dosing intervals for intraocular anti-VEGF injection therapy. An impedance biosensor based on a poly(3,4-ethylenedioxythiophene) (PEDOT)/gold nanoparticle (Au NP) composite was developed for detecting VEGF. PEDOT with Au NP was electrochemically deposited on three different medical electrode sensor designs: free-standing pads, screen printed dots, and interdigitated micro-strip electrodes. Anti-VEGF antibody was covalently immobilized on the surface of the polymer films through attachment to citrate-functionalized Au NPs, and the resulting composites were used to detect VEGF-165 by electrochemical impedance spectroscopy (EIS). The PEDOT-Au NP composite materials were characterized using optical microscopy, SEM/EDS, FIB, TEM, and STEM techniques. Among the different micro-electrodes, the interdigitated strip shape showed the best overall film stability and reproducibility. A linear relationship was established between the charge transfer resistance (Rct) and VEGF concentration. The detection limit of VEGF was found to be 0.5 pg/mL, with a correlation coefficient of 0.99 ± 0.064%. These results indicate that the proposed PEDOT/Au NP composites can be used in designing low-cost and accurate VEGF biosensors for applications such as clinical diagnosis of VEGF-mediated eye disease

Hypertrophic Cardiomyopathy Complicated by Left Ventricular Apical Necrosis and Aneurysm in a Young Man: FDG-PET Findings

A 29-year old male was transferred to our hospital with an abnormal chest X-ray finding diagnosed as hypertrophic cardiomyopathy with apical necrosis and aneurysm formation. Four years after the initial hospitalization, we confirmed the aneurysm and necrosis using both integrated positron emission tomography (PET) and computed tomography (CT) scanning. The F-18 2-fluoro-2-deoxy-D-glucose (FDG) PET/CT enabled precise localization of the aneurysm, which was found to be composed of semi-lunar calcification of non-metabolic myocardium. A contrast-enhanced CT angiography showed an hour-glass appearance of the left ventricular cavity. The integrated PET/CT fusion scanner is a novel multimodality technology that allows for a comprehensive analysis of the anatomical and functional status of complex heart disease. Based on these findings, long standing mechanical and physiologic abnormalities may have led to chronic ischemia in the hypertrophied myocardium, induced necrosis and calcification at the cardiac apex

Multifunctional carbon nanotube thin film composites by layer -by -layer assembly technique.

Polymeric layer-by-layer (LBL) assembly offers a pathway for multifunctional/multicomponent materials with molecular-scale control of stratified structures. Among the wide variety nanoscale building blocks such as nanowires and nanodots, single-walled carbon nanotubes (SWNTs) are regarded as one of the most versatile because of their superior mechanical and electrical properties as well as geometrical perfection. In this thesis, LBL assembled SWNT thin film nanocomposites with high mechanical strength/toughness and with high electrical/optical properties are presented. Exceptional exfoliation state of SWNTs and controlled nm-thick layered structures are the basis for achieving tunable physical properties. Highly anisotropic features of SWNTs are translated into 2 dimensional alignments by meniscus combing technique during LBL assemblies. Advanced LBL assemblies by dewetting methods are also introduced, which significantly accelerate the process with improved lateral organization of nanowires. Furthermore, SWNT composite coating on commodity cotton yarns produced intelligent electronic textiles (e-textiles) with intrinsic humidity sensibility. This e-textile has been further combined with antigen/antibody sensing capability in order to develop a selective albumin biosensor which provides a direct route for the application of these materials as wearable biomonitoring and telemedicine sensors.Ph.D.Applied SciencesChemical engineeringMaterials sciencePolymer chemistryPure SciencesUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/127102/2/3354109.pd

Tunable synthesis of hierarchical mesoporous silica via porogen-carrying organosilicates

We describe the synthesis and characterization of hierarchically porous organic-inorganic hybrid silica with periodic 2-D hexagonal order and tunable location of secondary nanopores through co-condensation of tetraethylorthosilicate (TEOS) and a new type of amphiphilic organosilicate precursors. Our amphiphilic organosilicates offer unique tunability of secondary micropores by carefully controlled bond molecular structure and number of bonds between hydrophobic adamantylphenols pore-generating moieties and siloxane precursors. Small angle X-ray scattering (SAXS) and microscopy results show a good structural order of the organic-inorganic hybrid silica. In addition, Si-29 CP-MAS NMR spectra confirm the successful incorporation of organosilicate precursors into a silica framework. The primary cylindrical mesopores (similar to 6.4 nm) were originated from the cooperative self-assembly of Pluronic P123 triblock copolymer templates while smaller meso-/micropores were derived from adamantylphenols groups. We have previously demonstrated that adam-graft SQ had an affinity for hydrophobic PO core blocks to be located close to PO segment, which resulted in small pores next to primary mesopores and the resultant increment of mesopore size as well as wrinkled silica walls. On the contrary, the secondary small pores were mainly generated within a silica network while the size of the primary mesopores unaffected with the addition of adam-bridge SQ due to its selective incorporation into a silica framework. Moreover, the organic-inorganic hybrid silica prepared with adam-bridge SQ showed higher thermal stability than that of adam-graft SQ and SBA-15 type mesoporous silica. It is attributed to more Si-O-Si bonds formed from the bridged structure as well as enhanced hydrogen bonding interaction between adam-bridge SQ hybrid silica and P123 templates. (C) 2016 Elsevier Inc. All rights reserved.OAIID:RECH_ACHV_DSTSH_NO:T201611879RECH_ACHV_FG:RR00200001ADJUST_YN:EMP_ID:A004677CITE_RATE:3.615FILENAME:Online_Tunable Synthesis of Hierarchical Mesoporous Silica via Porogen-Carrying Organosilicates.pdfDEPT_NM:화학생물공학부EMAIL:[email protected]_YN:YFILEURL:https://srnd.snu.ac.kr/eXrepEIR/fws/file/0e9bf081-3a1d-4db2-a1fe-ed803c36d1e1/linkN

Biosignal Sensors and Deep Learning-Based Speech Recognition: A Review

Voice is one of the essential mechanisms for communicating and expressing one’s intentions as a human being. There are several causes of voice inability, including disease, accident, vocal abuse, medical surgery, ageing, and environmental pollution, and the risk of voice loss continues to increase. Novel approaches should have been developed for speech recognition and production because that would seriously undermine the quality of life and sometimes leads to isolation from society. In this review, we survey mouth interface technologies which are mouth-mounted devices for speech recognition, production, and volitional control, and the corresponding research to develop artificial mouth technologies based on various sensors, including electromyography (EMG), electroencephalography (EEG), electropalatography (EPG), electromagnetic articulography (EMA), permanent magnet articulography (PMA), gyros, images and 3-axial magnetic sensors, especially with deep learning techniques. We especially research various deep learning technologies related to voice recognition, including visual speech recognition, silent speech interface, and analyze its flow, and systematize them into a taxonomy. Finally, we discuss methods to solve the communication problems of people with disabilities in speaking and future research with respect to deep learning components

T1-Positive Mn2+-Doped Multi-Stimuli Responsive poly(L-DOPA) Nanoparticles for Photothermal and Photodynamic Combination Cancer Therapy

In this study, we designed near-infrared (NIR)-responsive Mn2+-doped melanin-like poly(L-DOPA) nanoparticles (MNPs), which act as multifunctional nano-platforms for cancer therapy. MNPs, exhibited favorable π-π stacking, drug loading, dual stimuli (NIR and glutathione) responsive drug release, photothermal and photodynamic therapeutic activities, and T1-positive contrast for magnetic resonance imaging (MRI). First, MNPs were fabricated via KMnO4 oxidation, where the embedded Mn2+ acted as a T1-weighted contrast agent. MNPs were then modified using a photosensitizer, Pheophorbide A, via a reducible disulfide linker for glutathione-responsive intracellular release, and then loaded with doxorubicin through π-π stacking and hydrogen bonding. The therapeutic potential of MNPs was further explored via targeted design. MNPs were conjugated with folic acid (FA) and loaded with SN38, thereby demonstrating their ability to bind to different anti-cancer drugs and their potential as a versatile platform, integrating targeted cancer therapy and MRI-guided photothermal and chemotherapeutic therapy. The multimodal therapeutic functions of MNPs were investigated in terms of T1-MR contrast phantom study, photothermal and photodynamic activity, stimuli-responsive drug release, enhanced cellular uptake, and in vivo tumor ablation studies

Optical heating and temperature determination of core-shell gold nanoparticles and single-walled carbon nanotube microparticles

The real-time temperature measurement of nanostructured materials is particularly attractive in view of increasing needs of local temperature probing with high sensitivity and resolution in nanoelectronics, integrated photonics, and biomedicine. Light-induced heating and Raman scattering of single-walled carbon nanotubes with adsorbed gold nanoparticles decorating silica microparticles are reported, by both green and near IR lasers. The plasmonic shell is used as nanoheater, while the single-walled carbon nanotubes are Raman active and serve as a thermometer. Stokes and Anti-Stokes Raman spectra of single-walled carbon nanotubes serve to estimate the effective light-induced temperature rise on the metal nanoparticles. The temperature rise is constant with time, indicating stability of the adsorption density. The effective temperatures derived from Stokes and Anti-Stokes intensities are correlated with those measured in a heating stage. The resolution of the thermal experiments in our study was found to be 5-40 K

Natural Melanin Nanoparticle-decorated Screen-printed Carbon Electrode: Performance Test for Amperometric Determination of Hexavalent Chromium as Model Trace

A biosensor was prepared with natural melanin nanoparticles (MNP) decorated on a screen-printed carbon electrode (SPCE). Hexavalent chromium was selected as a well-known heavy metal ion to be detected for testing the performance of novel biosensor. Natural MNP was extracted from cuttlefish (Sepia officinalis) ink. Surface decoration of SPCEs with MNP was performed by two different methods. The first one was layer-by-layer assembly (LBL-A) for different cycle times(n). In the second one, plasma treatment of SPCE incorporated with evaporation-induced self-assembly (EI-SA) techniques including different incubation times in MNP solutions. The performance of both modified SPCEs were tested for amperometric detection of Cr(VI) in various water samples, and peak reduction of Cr(VI) was determined at 0.33 V. Amperometric results showed wide linear ranges of 0.1–2 ?M and 0.1–5 ?M of Cr(VI) for SPCEs modified with 14n-LBL-A and 12h-EI-SA, respectively. The sensitivities of SPCEs modified with 14n-LBL-A and 12h-EI-SA techniques were 0.27 ?A ?M?1 and 0.52 ?A ?M?1, respectively. In addition, both modified SPCEs selectively detected Cr(VI) in a model aqueous system composed of certain other heavy metals and minerals, and tap and lake water samples. The LOD and LOQ values for 12h-EI-SA were 0.03 ?M and 0.1 ?M, respectively. This showed that MNP-modified-SPCEs generated via EI-SA techniques have the potential to be an alternative to conventional detection methods such as ICP-MS