Flow rate--pressure drop relation for deformable shallow microfluidic channels

Laminar flow in devices fabricated from soft materials causes deformation of the passage geometry, which affects the flow rate--pressure drop relation. For a given pressure drop, in channels with narrow rectangular cross-section, the flow rate varies as the cube of the channel height, so deformation can produce significant quantitative effects, including nonlinear dependence on the pressure drop [{Gervais, T., El-Ali, J., G\"unther, A. \& Jensen, K.\ F.}\ 2006 Flow-induced deformation of shallow microfluidic channels.\ \textit{Lab Chip} \textbf{6}, 500--507]. Gervais et. al. proposed a successful model of the deformation-induced change in the flow rate by heuristically coupling a Hookean elastic response with the lubrication approximation for Stokes flow. However, their model contains a fitting parameter that must be found for each channel shape by performing an experiment. We present a perturbation approach for the flow rate--pressure drop relation in a shallow deformable microchannel using the theory of isotropic quasi-static plate bending and the Stokes equations under a lubrication approximation (specifically, the ratio of the channel's height to its width and of the channel's height to its length are both assumed small). Our result contains no free parameters and confirms Gervais et. al.'s observation that the flow rate is a quartic polynomial of the pressure drop. The derived flow rate--pressure drop relation compares favorably with experimental measurements.Comment: 20 pages, 6 figures; v2 minor revisions, accepted for publication in the Journal of Fluid Mechanic

Estimating external tissue support parameters with fluid-structure interaction models from 4D ultrasound of murine thoracic aortae

Modeling of fluid-structure interactions (FSIs) between the deformable arterial wall and blood flow is necessary to obtain physiologically realistic computational models of cardiovascular systems. However, lack of information on the nature of contact between the outer vessel wall and surrounding tissue presents challenges in prescribing appropriate structural boundary conditions. Imaging techniques used to visualize wall deformation in vivo may be useful for estimating simulation parameters that capture the effects of both vascular composition and surrounding tissue support on the vessel wall displacement. Here, we present a method to calibrate external tissue support parameters in FSI simulations against four-dimensional ultrasound (4DUS) of the murine thoracic aortae. We collected ultrasound, blood pressure, and histological data from several mice infused with angiotensin II (n = 4) and created a representative model of healthy and diseased (at 28 days post-angiotensin II infusion) murine aortae. We ran pulsatile FSI simulations after accounting for increased arterial wall stiffness with varying levels of tissue support, which demonstrated non-trivial variation in not only structural quantities, such as vessel wall deformation, but also hemodynamic quantities, such as wall shear stress across simulations. Furthermore, we compared simulation results with in vivo 4DUS imaging data and observed that the suitable range of the tissue support spring parameter was identical for both healthy and diseased states. This indicated that the same tissue support parameter estimates could be used for modeling the healthy and diseased states of the vessel, provided that changes in arterial wall stiffness had been considered. We anticipate this technique and the tissue support estimates reported herein will help inform computational models of blood flow and vasculature that incorporate the influence of external tissue