Analysis of Stator/Rotor Pole Combinations in Variable Flux Reluctance Machines Using Magnetic Gearing Effect

The torque production of variable flux reluctance machines (VFRMs) is explained by the “magnetic gearing effect” in recent research. Based on this theory, this paper concludes the general principles for feasible stator/rotor pole selection and corresponding winding configuration for VFRMs. The influence of stator/rotor pole combination on torque performance is comprehensively investigated not only in terms of average torque and torque ripple, but also in terms of each single torque component. It is found that the synchronous torque is proportional to the fundamental rotor radial permeance component and has the dominant contribution in average torque for all the VFRMs. The stator slot number and rotor pole number should be close to each other to achieve the highest output torque. Meanwhile, the 6-stator-slot/(6i ± 2)-rotor-pole (6s/(6i ± 2)r) and their multiples are large torque ripple origins for VFRMs due to the large reluctance torque ripple. Also, it is proved that a lower stator slot number is preferable choice to obtain higher torque/copper loss ratio, whereas a higher stator slot number is more suitable for large machine scale scenario. Finally, the analyses and conclusions are verified by finite element analysis on the 6-, 12-, 18-, and 24-stator-slot VFRMs and by experimental tests on a 6s/7r and 6s/8r VFRMs

Comparative Analysis of Variable Flux Reluctance Machines With Double- and Single-Layer Concentrated Armature Windings

In this paper, the variable flux reluctance machines (VFRMs) with double- and single-layer concentrated armature windings are comparatively analyzed. First, the single-layer winding is found to have an identical winding factor as a double-layer winding, but significantly larger peak value of magneto-motive force, which will result in severe local saturation in cores of VFRMs with single-layer winding. Then, based on the magnetic gearing effect and finite-element analysis, the electromagnetic performances of VFRMs with both winding types are compared. The VFRMs with single-layer winding are proved to be always lower in average torque, higher in torque ripple, larger in iron loss, and lower in efficiency than those with double-layer winding. Nevertheless, better fault-tolerance capability is achieved for a single-layer winding due to its physical separation between phases and larger phase self-inductance. Overall, the double-layer armature winding is the preferable choice for the VFRMs. Finally, a 6-stator-slot/4-rotor-pole VFRM with both double- and single-layer windings is prototyped for verification

Rotor shaping method for torque ripple mitigation in variable flux reluctance machines

In this paper, four rotor shaping methods, i.e., eccentric circular, inverse cosine, inverse cosine with third harmonic, and multi-step shaping methods, are developed and compared for torque ripple mitigation in variable flux reluctance machines (VFRMs). By using a 6-stator-pole/7-rotor-pole (6/7) VFRM as an example, the design criterions and capabilities of these four methods are illustrated. It is found that all the rotor shaping methods are capable of torque ripple mitigation and applicable to all the VFRMs except those with 6 k /(6 i ± 2) k ( k , i = 1, 2, 3…) stator/rotor pole combinations. Moreover, the inverse cosine with third harmonic and multi-step shaping methods are found to have the best performance. They are able to reduce the torque ripple by 90% at a cost of only 3% torque density reduction. A 6/7 VFRM with both conventional and shaped rotors is prototyped and tested for verification

Three-Particle Correlations from Parton Cascades in Au+Au Collisions

We present a study of three-particle correlations among a trigger particle and two associated particles in Au + Au collisions at $\sqrt{s_{NN}}$ = 200 GeV using a multi-phase transport model (AMPT) with both partonic and hadronic interactions. We found that three-particle correlation densities in different angular directions with respect to the triggered particle (`center', `cone', `deflected', `near' and `near-away') increase with the number of participants. The ratio of `deflected' to `cone' density approaches to 1.0 with the increasing of number of participants, which indicates that partonic Mach-like shock waves can be produced by strong parton cascades in central Au+Au collisions.Comment: 9 pages, 6 figures; Final version to appear in Physics Letters

Di-hadron azimuthal correlation and Mach-like cone structure in parton/hadron transport model

In the framework of a multi-phase transport model (AMPT) with both partonic and hadronic interactions, azimuthal correlations between trigger particles and associated scattering particles have been studied by the mixing-event technique. The momentum ranges of these particles are $3< p^{trig}_T< 6$ GeV/$c$ and $0.15< p_{T}^{assoc} < 3$ GeV/$c$ (soft), or $2.5<p^{trig}_T<$ 4 GeV/$c$ and $1< p_{T}^{assoc} < 2.5$ GeV/$c$ (hard) in Au + Au collisions at $\sqrt{s_{NN}}$ = 200 GeV. A Mach-like structure has been observed in correlation functions for central collisions. By comparing scenarios with and without parton cascade and hadronic rescattering, we show that both partonic and hadronic dynamical mechanisms contribute to the Mach-like structure of the associated particle azimuthal correlations. The contribution of hadronic dynamical process can not be ignored in the emergence of Mach-like correlations of the soft scattered associated hadrons. However, hadronic rescattering alone cannot reproduce experimental amplitude of Mach-like cone on away-side, and the parton cascade process is essential to describe experimental amplitude of Mach-like cone on away-side. In addition, both the associated multiplicity and the sum of $p_{T}$ decrease, whileas the $$ increases, with the impact parameter in the AMPT model including partonic dynamics from string melting scenario.Comment: 9 pages, 5 figures; Physics Letters B 641, 362-367 (2006

Quantum algebra in the mixed light pseudoscalar meson states

In this paper, we investigate the entanglement degrees of pseudoscalar meson states via quantum algebra Y(su(3)). By making use of transition effect of generators J of Y(su(3)), we construct various transition operators in terms of J of Y(su(3)), and act them on eta-pion-eta mixing meson state. The entanglement degrees of both the initial state and final state are calculated with the help of entropy theory. The diagrams of entanglement degrees are presented. Our result shows that a state with desired entanglement degree can be achieved by acting proper chosen transition operator on an initial state. This sheds new light on the connect among quantum information, particle physics and Yangian algebra.Comment: 9 pages, 3 figure

Calculated phase diagrams, iron tolerance limits, and corrosion of Mg-Al alloys

The factors determining corrosion are reviewed in this paper, with an emphasis on iron tolerance limit and the production of high-purity castings. To understand the iron impurity tolerance limit, magnesium phase diagrams were calculated using the Pandat software package. Calculated phase diagrams can explain the iron tolerance limit and the production of high-purity castings by means of control of melt conditions; this is significant for the production of quality castings from recycled magnesium. Based on the new insight, the influence of the microstructure on corrosion of magnesium alloys is reviewed

Identification of neprilysin as a potential target of arteannuin using computational drug repositioning

ABSTRACT The discovery of arteannuin (qinghaosu) in the 20th Century was a major advance for medicine. Besides functioning as a malaria therapy, arteannuin is a pharmacological agent in a range of other diseases, but its mechanism of action remains obscure. In this study, the reverse docking server PharmMapper was used to identify potential targets of arteannuin. The results were checked using the chemical-protein interactome servers DRAR-CPI and DDI-CPI, and verified by AutoDock Vina. The results showed that neprilysin (also known as CD10), a common acute lymphoblastic leukaemia antigen, was the top disease-related target of arteannuin. The chemical-protein interactome and docking results agreed with those of PharmMapper, further implicating neprilysin as a potential target. Although experimental verification is required, this study provides guidance for future pharmacological investigations into novel clinical applications for arteannuin

Energy and system size dependence of \phi meson production in Cu+Cu and Au+Au collisions

We study the beam-energy and system-size dependence of \phi meson production (using the hadronic decay mode \phi -- K+K-) by comparing the new results from Cu+Cu collisions and previously reported Au+Au collisions at \sqrt{s_NN} = 62.4 and 200 GeV measured in the STAR experiment at RHIC. Data presented are from mid-rapidity (|y|<0.5) for 0.4 < pT < 5 GeV/c. At a given beam energy, the transverse momentum distributions for \phi mesons are observed to be similar in yield and shape for Cu+Cu and Au+Au colliding systems with similar average numbers of participating nucleons. The \phi meson yields in nucleus-nucleus collisions, normalised by the average number of participating nucleons, are found to be enhanced relative to those from p+p collisions with a different trend compared to strange baryons. The enhancement for \phi mesons is observed to be higher at \sqrt{s_NN} = 200 GeV compared to 62.4 GeV. These observations for the produced \phi(s\bar{s}) mesons clearly suggest that, at these collision energies, the source of enhancement of strange hadrons is related to the formation of a dense partonic medium in high energy nucleus-nucleus collisions and cannot be alone due to canonical suppression of their production in smaller systems.Comment: 20 pages and 5 figure