55 research outputs found

    Work-Zone Traffic Performance Measures

    Get PDF
    This project synthesized current work-zone performance measures into a toolbox that details the resources available and also provides current information and ideas on what other state agencies are doing to report performance to the public

    EVALUATING SPEED DIFFERENCES BETWEEN PASSENGER VEHICLES AND HEAVY TRUCKS FOR TRANSPORTATION-RELATED EMISSION MODELING

    Get PDF
    Heavy vehicles emit emissions at different rates than passenger vehicles. They may behave differently on the road as well, yet they are often treated similarly to passenger vehicles in emissions modeling. Although not frequently considered in calculating emission rates, differences in the operating speeds of passenger vehicles and heavy trucks may influence emissions. The main goal of this research project was to evaluate whether heavy trucks typically travel at significantly different operating speeds than passenger vehicles and what impact differences in on-road speeds would have on emissions. Average speeds and spot speeds were collected for heavy trucks and passenger vehicles for four arterial segments and spot speeds were collected for two freeway segments in Des Moines, Iowa. Average and spot speeds were collected for four arterial segments and three freeway segments in the Minneapolis/St. Paul, Minnesota metropolitan area. The results of this research show that heavy trucks and passenger vehicles operate differently on the road. Average and spot speeds were compared for heavy trucks and passenger vehicles by facility. Average and spot speeds for heavy-duty trucks were lower than for passenger vehicles for all locations. Differences could have consequences for project level and regional emissions modeling particularly since the ability to demonstrate conformity is based on the ability to correctly estimate and model vehicle activity

    Lane-Departure Safety Countermeasures: Strategic Action Plan for the Iowa Department of Transportation

    Get PDF
    Lane departure crashes are the single largest category of fatal and major injury crashes in Iowa. The Iowa Department of Transportation (DOT) estimates that 60 percent of roadway-related fatal crashes are lane departures and that 39 percent of Iowa’s fatal crashes are single-vehicle run-off-road (SVROR) crashes. Addressing roadway departure was identified as one of the top eight program strategies for the Iowa DOT in their Comprehensive Highway Safety Plan (CHSP). The goal is to reduce lane departure crashes and their consequences through lane departure-related design standards and policies including paved shoulders, centerline and shoulder rumble strips, pavement markings, signs, and median barriers. Lane-Departure Safety Countermeasures: Strategic Action Plan for the Iowa Department of Transportation outlines roadway countermeasures that can be used to address lane departure crashes. This guidance report was prepared by the Institute for Transportation (InTrans) at Iowa State University for the Iowa DOT. The content reflects input from and multiple reviews by both a technical advisory committee and other knowledgeable individuals with the Iowa DOT

    Vertical Delineation

    Get PDF
    Vertical delineators are intended to warn drivers of an approaching curve while providing them with a better appreciation of the sharpness of a curve. Drivers can then select an appropriate speed before entering the curve. Delineation can also provide continuous tracking information once drivers are within the curve to help position their vehicles within the travel lane while traversing the curve. The most common type of vertical delineation is post mounted delineators (PMDs). These devices are usually flexible or rigid posts with some amount of reflective surface mounted along the roadside to provide additional delineation. Another treatment that has been used is to provide additional delineation on chevron posts

    Chevrons and Oversized Chevrons

    Get PDF
    Chevrons provide additional empha­sis and guidance for drivers. If spaced properly, chevrons can delineate the curve so drivers can interpret the sharp­ness of the curve. Table 2C-2 of the Manual on Uniform Traffic Control Devices (FHWA 2009a) recommends the size of chevron alignment (W1-8) signs by roadway type. Several agencies, including the Iowa Department of Transportation (Iowa DOT), have applied a larger chevron size to a roadway than suggested by this table. The idea is that larger chevrons will be more prominent and visible to drivers. These larger chev­rons may be particularly useful if sight distance issues exist

    Modeling Merging Behavior at Lane Drops

    Get PDF
    In work-zone configurations where lane drops are present, merging of traffic at the taper presents an operational concern. In addition, as flow through the work zone is reduced, the relative traffic safety of the work zone is also reduced. Improving work-zone flow-through merge points depends on the behavior of individual drivers. By better understanding driver behavior, traffic control plans, work zone policies, and countermeasures can be better targeted to reinforce desirable lane closure merging behavior, leading to both improved safety and work-zone capacity. The researchers collected data for two work-zone scenarios that included lane drops with one scenario on the Interstate and the other on an urban arterial roadway. The researchers then modeled and calibrated these scenarios in VISSIM using real-world speeds, travel times, queue lengths, and merging behaviors (percentage of vehicles merging upstream and near the merge point). Once built and calibrated, the researchers modeled strategies for various countermeasures in the two work zones. The models were then used to test and evaluate how various merging strategies affect safety and operations at the merge areas in these two work zones

    On-Pavement Signing

    Get PDF
    Pavement marking legends are placed on the roadway to remind drivers of the speed limit or to slow down. Use of wording on the pavement surface is more dramatic than use of signing only, which can get lost in the clutter of a streetscape. On-pavement speed limit markings have been used to reinforce speed limits or to indicate a transition zone. For more on this topic by these authors, see also Evaluation of Dynamic Speed Feedback Signs on Curves: A National Demonstration Project : http://www.trb.org/main/blurbs/172092.asp

    Evaluation of Rumble Stripes on Low-Volume Rural Roads in Iowa—Phase I

    Get PDF
    Single-vehicle run-off-road crashes are the most common crash type on rural two-lane Iowa roads. Rumble strips have been proven effective in mitigating these crashes, but these strips are commonly installed in paved shoulders adjacent to higher-volume roads owned by the State of Iowa. Lower-volume paved rural roads owned by local agencies do not commonly feature paved shoulders but frequently experience run-off-road crashes. This project involved installing “rumble stripes,” which are a combination of conventional rumble strips with a painted edge line placed on the surface of the milled area, along the edge of the travel lanes but at a narrow width to avoid possible intrusion into the normal vehicle travel paths. Candidate locations were selected from a list of paved local rural roads that were most recently listed in the top 5% of roads for run-off-road crashes in Iowa. Horizontal curves were the most favored locations for rumble stripe installation because they commonly experience roadway departure crashes. The research described in this report was part of a project funded by the Federal Highway Administration, Iowa Highway Research Board, and Iowa Department of Transportation to evaluate the effectiveness of edge line rumble strips in Iowa. The project evaluated the effectiveness of “rumble stripes” in reducing run-off-road crashes and in improving the longevity and wet weather visibility of edge line markings. This project consists of two phases. The first phase was to select pilot study locations, select a set of test sites, install rumble stripes, summarize lessons learned during installation, and provide a preliminary assessment of the rumble stripes’ performance. This information is summarized in this report. The purpose of the second phase is to provide a more long-term assessment of the performance of the pavement markings, conduct preliminary crash assessments, and evaluate lane keeping. This will result in a forthcoming second report

    Evaluation of Low Cost Traffic Calming for Rural Communities – Phase II [Updated]

    Get PDF
    The main goal of the research described in this report was to evaluate countermeasures that agencies can use to reduce speeds as drivers enter rural communities located on high-speed roadways. The objectives of this study were as follows: * Identify and summarize countermeasures used to manage speeds in transition zones * Demonstrate the effectiveness of countermeasures that are practical for high- to low-speed transition zones * Acquire additional information about countermeasures that may show promise but lack sufficient evidence of effectiveness * Develop an application toolbox to assist small communities in selecting appropriate transition zones and effective countermeasures for entrances to small rural communities The team solicited small communities that were interested in participating in the Phase II study and several communities were also recommended. The treatments evaluated were selected by carefully considering traffic-calming treatments that have been used effectively in other countries for small rural communities, as well as the information gained from the first phase of the project. The treatments evaluated are as follows: * Transverse speed bars * Colored entrance treatment * Temporary island * Radar-activated speed limit sign * Speed feedback sign The toolbox publication and four focused tech briefs also cover the results of this work
    • …
    corecore