A Comparative Performance Analysis of Two Printed Circular Arrays for Power-Based Vehicle Localization Applications

A comparative study of the performance characteristics of a printed 8-element V-shaped circular antenna array and an 8-element Yagi circular array operating at 2.45 GHz for vehicular direction finding applications is presented. Two operating modes are investigated; switched and phased modes. The arrays were fabricated on FR-4 substrates with 0.8 mm thickness. Measured and simulated results were compared. Radiation gain patterns were measured on a 1 m diameter ground plane that resembles the rooftop of a vehicle. The HPBW of the Yagi was found to be about 3° narrower than its V-shaped counterpart when measured above a reflecting ground plane and operated in switched mode. The printed V-shaped antenna array offers 2.5 dB extra gain compared to the printed Yagi array

A comparative performance analysis of two printed circular arrays for power-based vehicle localization applications

ABSTRACT: A comparative study of the performance characteristics of a printed 8-element V-shaped circular antenna array and an 8-element Yagi circular array operating at 2.45 GHz for vehicular direction finding applications is presented. Two operating modes are investigated; switched and phased modes. The arrays were fabricated on FR-4 substrates with 0.8 mm thickness. Measured and simulated results were compared. Radiation gain patterns were measured on a 1 m diameter ground plane that resembles the rooftop of a vehicle. The HPBW of the Yagi was found to be about 3° narrower than its V-shaped counterpart when measured above a reflecting ground plane and operated in switched mode. The printed V-shaped antenna array offers 2.5 dB extra gain compared to the printed Yagi array

18 Element Massive MIMO/Diversity 5G Smartphones Antenna Design for Sub-6 GHz LTE Bands 42/43 Applications

This work presents an 18 element antenna system compatible with massive multiple input multiple output (MIMO)/Diversity fourth/fifth generation (4G/5G) smartphones. The antennas are designed at sub-6 GHz long term evolution (LTE) band 42 (3.4-3.6 GHz) and LTE band 43 (3.6-3.8 GHz). A simple slot type antenna is considered as the radiating element, with open ended slots used for obtaining a compact design. These slots also act as decoupling elements to improve the isolation among different radiators. The proposed antenna elements are designed on a low-cost FR-4 substrate having dimension of 150 mm × 80 mm × 1.6 mm, which can be typically used for 6-inch smart phones. The simulated and measured values of antenna gain are found to be greater than 5.3 dBi. Simulated and measured results of the proposed design show excellent impedance matching (reflection coefficient>20 dB), port isolation (>20 dB), total efficiency (>87%) and Envelope Correlation Coefficient (<0.01) over the operating frequency. MIMO antenna performance metrics are verified by calculating the ergodic channel capacity with Kronecker channel model

The Glucocorticoid Receptor and Certain KRÜPPEL-Like Transcription Factors have the Potential to Synergistically Stimulate Bovine Herpesvirus 1 Transcription and Reactivation from Latency

Bovine herpesvirus 1 (BoHV-1), an important bovine pathogen, establishes life-long latency in sensory neurons within trigeminal ganglia (TG). Stress, as mimicked by the synthetic corticosteroid dexamethasone, consistently induces reactivation in calves latently infected with BoHV-1. Dexamethasone induces expression of several transcription factors in TG neurons during early stages of reactivation, including Krüppel-like transcription factors (KLF): KLF4, KLF6, KLF15, and promyelocytic leukemia zinc finger. Furthermore, the glucocorticoid receptor (GR) is consistently detected in TG neurons expressing viral regulatory proteins during reactivation from latency. The viral immediate early transcription unit 1 (IEtu1) promoter that drives expression of two viral transcription factors (bICP0 and bICP4) contains two GR response elements (GREs) and is stimulated by DEX. KLF15 and the GR form a feed forward transcription loop that synergistically stimulates productive infection and IEtu1 promoter activity. New studies demonstrate the GR and KLF6 synergistically stimulate productive infection and IEtu1 promoter activity if the GREs are intact. Furthermore, the GR and KLF6 interact with wild-type GREs within the IEtu1 promoter, but not GRE mutants. These studies suggest that certain KLF family members and the GR can convert a silent viral genome in latently infected neurons into an actively transcribing genome during reactivation from latency

Collocated MIMO travelling wave SIW slot array antennas for millimetre waves

ABSTRACT: A novel four-element collocated travelling wave substrate integrated waveguide (SIW) multiple-input multiple-output (MIMO) antenna covering millimetre wave (mm-wave) bands (28–32 GHz) is presented. The antenna exhibits a matching bandwidth of more than 4 GHz and a measured gain of 15 dBi. The MIMO antenna elements are collocated, thus significantly reducing the size of the proposed design. To spatially isolate the beams (obtain lower correlation coefficient) of the MIMO antenna elements, the beams are oriented in different directions. The slots within each SIW array are designed to provide tilted beams, thus eliminating the need for a beam switching network. Four distinct beams are formed towards ±10° and ±30°. The dimension of the four-element MIMO SIW design is 68 × 30.68 × 0.5 mm3. The proposed antenna has a high gain, compact size, simpler feeding and enhanced MIMO capability compared to other SIW antennas proposed in the literature

Sub-sampling-based 2D localization of an impulsive acoustic source in reverberant environments

ABSTRACT: This paper presents a robust method for two-dimensional (2D) impulsive acoustic source localization in a room environment using low sampling rates. The proposed method finds the time delay from the room impulse response (RIR) which makes it robust against room reverberations. We consider the RIR as a sparse phenomenon and apply a recently proposed sparse signal reconstruction technique called orthogonal clustering (OC) for its estimation from the sub-sampled received signal. The arrival time of the direct path signal at a pair of microphones is identified from the estimated RIR, and their difference yields the desired time delay estimate (TDE). Low sampling rates reduces the hardware and computational complexity and decreases the communication between the microphones and the centralized location. Simulation and experimental results of an actual hardware setup are presented to demonstrate the performance of the proposed technique

Target parameter estimation for spatial and temporal formulations in MIMO radars using compressive sensing

Conventional algorithms used for parameter estimation in colocated multiple-input-multiple-output (MIMO) radars require the inversion of the covariance matrix of the received spatial samples. In these algorithms, the number of received snapshots should be at least equal to the size of the covariance matrix. For large size MIMO antenna arrays, the inversion of the covariance matrix becomes computationally very expensive. Compressive sensing (CS) algorithms which do not require the inversion of the complete covariance matrix can be used for parameter estimation with fewer number of received snapshots. In this work, it is shown that the spatial formulation is best suitable for large MIMO arrays when CS algorithms are used. A temporal formulation is proposed which fits the CS algorithms framework, especially for small size MIMO arrays. A recently proposed low-complexity CS algorithm named support agnostic Bayesian matching pursuit (SABMP) is used to estimate target parameters for both spatial and temporal formulations for the unknown number of targets. The simulation results show the advantage of SABMP algorithm utilizing low number of snapshots and better parameter estimation for both small and large number of antenna elements. Moreover, it is shown by simulations that SABMP is more effective than other existing algorithms at high signal-to-noise ratio

10 Element Sub-6-GHz Multi-Band Double-T Based MIMO Antenna System for 5G Smartphones

A 10 element multiple input multi output (MIMO)/Diversity antenna system is considered to work in Sub-6 GHz frequency range. The proposed design can work in long term evolution (LTE) band 42(3.4-3.6 GHz), LTE band 43(3.6-3.8 GHz) and LTE band 46(5.15-5.925 GHz). The proposed design consists of 10 identical and highly isolated T-shaped slot antennas fed with T-shaped lines. All three bands have the return loss values (83%) in free space. The peak value of envelope correlation coefficient is 0.06 and the calculated value of ergodic channel capacity is found to be greater than 41bps/Hz in all the bands.The effect of hand grip as well as the presence of battery and LCD screen is investigated. Simulated results are validated via fabrication and measurement of the proposed design