Characterization of transient groundwater flow through a high arch dam foundation during reservoir impounding

AbstractEven though a large number of large-scale arch dams with height larger than 200 m have been built in the world, the transient groundwater flow behaviors and the seepage control effects in the dam foundations under difficult geological conditions are rarely reported. This paper presents a case study on the transient groundwater flow behaviors in the rock foundation of Jinping I double-curvature arch dam, the world's highest dam of this type to date that has been completed. Taking into account the geological settings at the site, an inverse modeling technique utilizing the time series measurements of both hydraulic head and discharge was adopted to back-calculate the permeability of the foundation rocks, which effectively improves the uniqueness and reliability of the inverse modeling results. The transient seepage flow in the dam foundation during the reservoir impounding was then modeled with a parabolic variational inequality (PVI) method. The distribution of pore water pressure, the amount of leakage, and the performance of the seepage control system in the dam foundation during the entire impounding process were finally illustrated with the numerical results

Precision Measurement of M1 Optical Clock Transition in Ni12+

Highly charged ions (HCIs) have drawn significant interest in quantum metrology and in search for new physics. Among these, Ni12+ is considered as one of the most promising candidates for the next generation of HCI optical clocks, due to its two E1-forbidden transitions M1 and E2, which occur in the visible spectral range. In this work, we used the Shanghai-Wuhan Electron Beam Ion Trap to perform a high-precision measurement of the M1 transition wavelength. Our approach involved an improved calibration scheme for the spectra, utilizing auxiliary Ar+ lines for calibration and correction. Our final measured result of the M1 transition wavelength demonstrates a five-fold improvement in accuracy compared to our previous findings, reaching the sub-picometer level accuracy. In combination with our rigorous atomic-structure calculations to capture the electron correlations and relativistic effects, the quantum electrodynamic (QED) corrections were extracted. Moreover, comparing with an estimate of the one-electron QED contributions by using the GRASP2018 package, we found that the present experimental accuracy is high enough for testing the higher-order QED corrections for such a complex system with four electrons in the p subshell.Comment: 15 pages, 5 figure

Biomechanical analysis of sandwich vertebrae in osteoporotic patients: finite element analysis

ObjectiveThe aim of this study was to investigate the biomechanical stress of sandwich vertebrae (SVs) and common adjacent vertebrae in different degrees of spinal mobility in daily life.Materials and methodsA finite element model of the spinal segment of T10-L2 was developed and validated. Simultaneously, T11 and L1 fractures were simulated, and a 6-ml bone cement was constructed in their center. Under the condition of applying a 500-N axial load to the upper surface of T10 and immobilizing the lower surface of L2, moments were applied to the upper surface of T10, T11, T12, L1, and L2 and divided into five groups: M-T10, M-T11, M-T12, M-L1, and M-L2. The maximum von Mises stress of T10, T12, and L2 in different groups was calculated and analyzed.ResultsThe maximum von Mises stress of T10 in the M-T10 group was 30.68 MPa, 36.13 MPa, 34.27 MPa, 33.43 MPa, 26.86 MPa, and 27.70 MPa greater than the maximum stress value of T10 in the other groups in six directions of load flexion, extension, left and right lateral bending, and left and right rotation, respectively. The T12 stress value in the M-T12 group was 29.62 MPa, 32.63 MPa, 30.03 MPa, 31.25 MPa, 26.38 MPa, and 26.25 MPa greater than the T12 stress value in the other groups in six directions. The maximum stress of L2 in M-T12 in the M-L2 group was 25.48 MPa, 36.38 MPa, 31.99 MPa, 31.07 MPa, 30.36 MPa, and 32.07 MPa, which was greater than the stress value of L2 in the other groups. When the load is on which vertebral body, it is subjected to the greatest stress.ConclusionWe found that SVs did not always experience the highest stress. The most stressed vertebrae vary with the degree of curvature of the spine. Patients should be encouraged to avoid the same spinal curvature posture for a long time in life and work or to wear a spinal brace for protection after surgery, which can avoid long-term overload on a specific spine and disrupt its blood supply, resulting in more severe loss of spinal quality and increasing the possibility of fractures