Synthesis of high-performance aqueous fluorescent nanodispersions for textile printing — a study of influence of moles ratio on fastness properties

Aqueous fluorescent dispersions containing dyed acrylic-based copolymer nanoparticles possess significant credentials concerning green technology as compared to those prepared with the conventional vinyl-based monomers in textile and garment sectors; however, their essential textile fastness properties are yet to achieve. In the present work, a series of acrylic nanodispersions were synthesized by varying the moles ratio of benzyl methacrylate (BZMA), methyl methacrylate (MMA), and 2-hydroxypropyl methacrylate (HPMA) monomers. This was done to study their effect on dye aggregation and dyed polymer particles agglomeration. FT-IR spectral analysis showed the formation of polymer structures, while Malvern Analyzer, Transmission Electron Microscopy, and Scanning Electron Microscopy analysis suggested that the particles are spherical in shape and their size is less than 200 nm. The obtained nanodispersions were later applied on cotton fabrics for the evaluation of wash fastness and colour migration. Premier color scan spectrophotometer and zeta potential measurement studies suggested that colour migration of printed cotton fabrics increased with an increasing agglomeration of particles and it was also observed to increase with the moles ratio of MMA and zeta potentials

ANALYTICAL METHOD DEVELOPMENT AND VALIDATION FOR THE SIMULTANEOUS ESTIMATION OF SOFOSBUVIR AND VELPATASVIR DRUG PRODUCT BY REVERSE PHASE HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD

 Objectives: The purpose of the research is to develop a simple, precise, economical, accurate, reproducible, and sensitive method for the estimation of sofosbuvir and velpatasvir drug product by rp-hplc methodMethods: New Analytical method was developed for the estimation of Velpatasvir and Sofosbuvir in drug product by liquid chromatography. The chromatographic separation was achieved on C18 column (Luna 18 150*4.6mm3.0um) at ambient temperature. The separation achieved employing a mobile phase consists of 0.1%v/v Formic acid in water: Methanol: Acetonitrile (35:40:25). The flow rate was 0.8ml/ minute and ultra violet detector at 269nm. The average retention time for Velpatasvir and Sofosbuvir found to be 2.62 min and 3.72 min.Results: The developed method was validated as per the ICH analytical method validation guidelines. All validation parameters were within the acceptable range. The assay methods were found to be linear from 80-240 µg/ml for Sofosbuvir and 20-60µg/ml for Velpatasvir. The correlation coefficient was 0.9998 and 0.9992 for velpatasvir and sofosbuvir respectively.  The mean percentage recovery for the developed method was found to be in the range of 98.4-100.4% for velpatasvir and 98.6-100.6% for sofosbuvir. The developed method was also found to be robustConclusion: The developed method was found to be suitable for the routine quantitative analysis of Velpatasvir and Sofosbuvir in bulk and pharmaceutical dosage form. It was also concluded that developed method was accurate, precise, linear, reproducible, robust, and sensitive.Â

Identification of Novel AXL Kinase Inhibitors Using Ligand-Based Pharmacophore Screening and Molecular Dynamics Simulations

AXL kinase is a promising target in novel drug discovery for cancer. A ligand-based pharmacophore model was generated with the Pharmit web server. Its inbuilt PubChem molecule database was screened and led to 408 candidate molecules. Docking of the AXL kinase active sites with the identified list of candidate molecules was carried out with Autodock Vina docking software. This resulted in four compounds selected for further investigation. Molecular dynamics simulation of two ligands (PubChem-122421875 and PubChem-78160848) showed considerable binding with AXL kinase. From the MM-PBSA binding free energies investigation, the PubChem-122421875 (G = −179.3 kJ/mol) and PubChem-78160848 (G = −208.3 kJ/mol) ligands had favorable protein-ligand complex stability and binding free energy. Hence, PubChem-122421875 and PubChem-78160848 molecules identified in this work could be a potent starting point for developing novel AXL kinase inhibitor molecules

Spectroscopic and optical properties of Nd(3+) doped fluorine containing alkali and alkaline earth zinc-aluminophosphate optical glasses

Nd(3+) doped fluorine containing zinc-aluminophosphate glasses have been prepared with alkali and alkaline earth content to understand the effect of network modifiers on radiative process. The physical and optical properties of these glasses have been evaluated. The Judd-Ofelt model for the intensity analysis of induced electric dipole transitions has been applied to the measured oscillator strengths of the absorption bands to determine the three phenomenological intensity parameters Omega(2), Omega(4) and Omega(6) for each glass. Using these parameters, transition probability (A), total transition probability (A(T)), branching ratios (beta(R)) radiative life times (tau(R)) and integrated cross-section (sigma(a)) for the stimulated emission have been theoretically calculated for certain excited Nd(3+) fluorescent levels. From the obtained results the conclusion is made about the possibility of using these glasses as laser material. (C) 2009 Elsevier B.V. All rights reserved

Identification of Novel AXL Kinase Inhibitors Using Ligand-Based Pharmacophore Screening and Molecular Dynamics Simulations

AXL kinase is a promising target in novel drug discovery for cancer. A ligand-based pharmacophore model was generated with the Pharmit web server. Its inbuilt PubChem molecule database was screened and led to 408 candidate molecules. Docking of the AXL kinase active sites with the identified list of candidate molecules was carried out with Autodock Vina docking software. This resulted in four compounds selected for further investigation. Molecular dynamics simulation of two ligands (PubChem-122421875 and PubChem-78160848) showed considerable binding with AXL kinase. From the MM-PBSA binding free energies investigation, the PubChem-122421875 (G = −179.3 kJ/mol) and PubChem-78160848 (G = −208.3 kJ/mol) ligands had favorable protein-ligand complex stability and binding free energy. Hence, PubChem-122421875 and PubChem-78160848 molecules identified in this work could be a potent starting point for developing novel AXL kinase inhibitor molecules

Development and Validation for Quantification of Cephapirin and Ceftiofur by Ultraperformance Liquid Chromatography with Triple Quadrupole Mass Spectrometry

Cross contamination of β-lactams is one of the highest risks for patients using pharmaceutical products. Penicillin and some non-penicillin β-lactams may cause potentially life-threatening allergic reactions. The trace detection of β-lactam antibiotics in cleaning rinse solutions of common reactors and manufacturing aids in pharmaceutical facilities is very crucial. Therefore, the common facilities adopt sophisticated cleaning procedures and develop analytical methods to assess traces of these compounds in rinsed solutions. For this, a highly sensitive and reproducible ultra-performance liquid chromatography with triple quadrupole mass spectrometry (UHPLC-MS/MS) method was developed for the analysis of Cephapirin and Ceftiofur. As per the FDA guidelines described in FDA-2011-D-0104, the contamination of these β-lactam antibiotics must be regulated. The analysis was performed on an XBridge C18 column with 100 mm length, 4.6 mm diameter, and 3.5 µm particle size at an oven temperature of about 40 °C. The mobile phase was composed of 0.15% formic acid in water and acetonitrile as mobile phases A and B, and a flow rate was set to 0.6 mL/min. The method was validated for Cephapirin and Ceftiofur. The quantification precision and accuracy were determined to be the lowest limit of detection 0.15 parts per billion (ppb) and the lowest limit of quantification 0.4 ppb. This method was linear in the range of 0.4 to 1.5 ppb with the determination of coefficient (R2 > 0.99). This sensitive and fast method was fit-for-purpose for detecting and quantifying trace amounts of β-lactam contamination, monitoring cross contamination in facility surface cleaning, and determining the acceptable level of limits for regulatory purposes

Development and Validation for Quantification of 7-Nitroso Impurity in Sitagliptin by Ultraperformance Liquid Chromatography with Triple Quadrupole Mass Spectrometry

The purpose of this research study was to develop an analytical method for the quantification of 7-nitroso-3-(trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4] triazolo [4,3-a] pyrazine (7-nitroso impurity), which is a potential genotoxic impurity. Since sitagliptin is an anti-diabetic medication used to treat type 2 diabetes and the duration of the treatment is long-term, the content of nitroso impurity must be controlled by using suitable techniques. To quantify this impurity, a highly sensitive and reproducible ultraperformance liquid chromatography with triple quadrupole mass spectrometry (UHPLC-MS/MS) method was developed. The analysis was performed on a Kromasil-100, with a C18 column (100 mm × 4.6 mm with a particle size of 3.5 µm) at an oven temperature of approximately 40 °C. The mobile phase was composed of 0.12% formic acid in water, with methanol as mobile phases A and B, and the flow rate was set to 0.6 mL/min. The method was validated according to the current International Council for Harmonisation (ICH) guidelines with respect to acceptable limits, specificity, reproducibility, accuracy, linearity, precision, ruggedness and robustness. This method is useful for the detection of the impurity at the lowest limit of detection (LOD), which was 0.002 ppm, and the lowest limit of quantification (LOQ), which was 0.005 ppm. This method was linear in the range of 0.005 to 0.06 ppm and the square of the correlation coefficient (R2) was determined to be > 0.99. This method could help to determine the impurity in the regular analysis of sitagliptin drug substances and drug products

One-Pot Synthesized Pd@N-Doped Graphene: An Efficient Catalyst for Suzuki–Miyaura Couplings

Nitrogen-doped graphene (NDG)-palladium (Pd)-based nanocatalysts (NDG@Pd) can be potentially applied as an efficient catalyst for the preparation of biaryls in a Suzuki−Miyaura coupling reaction. Herein, we report the one-pot facile synthesis of an NDG@Pd nanocatalyst, wherein the nanocatalyst was prepared by the simultaneous reduction of graphene oxide (GRO) and PdCl2 in the presence of hydrazine hydrate as a reducing agent, while ammonium hydroxide was used as a source of “N’’ on the surface of graphene. The as-synthesized NDG@Pd nanocatalyst, consisting of smaller-sized, spherical-shaped palladium nanoparticles (Pd-NPs) on the surface of NDG, was characterized by several spectroscopic and microscopic techniques, including high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), ultraviolet−visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and Brunauer−Emmett−Teller (BET). The nanocatalyst displayed outstanding catalytic activity in the Suzuki−Miyaura cross-coupling reactions of phenyl halides with phenyl boronic acids under facile conditions in water. The catalytic activity of NDG@Pd was found to be a more efficient catalyst when compared to pristine highly reduced graphene oxide (HRG) based Pd nanocatalyst (HRG@Pd). Furthermore, the reusability of the catalyst was also tested by repeatedly performing the same reaction using the recovered catalyst. The N-doped catalyst displayed excellent reusability even after several reactions

Eco-Friendly and Solvent-Less Mechanochemical Synthesis of ZrO2–MnCO3/N-Doped Graphene Nanocomposites: A Highly Efficacious Catalyst for Base-Free Aerobic Oxidation of Various Types of Alcohols

In recent years, the development of green mechanochemical processes for the synthesis of new catalysts with higher catalytic efficacy and selectivity has received manifest interest. In continuation of our previous study, in which graphene oxide (GRO) and highly reduced graphene oxide (HRG) based nanocomposites were prepared and assessed, herein, we have explored a facile and solvent-less mechanochemical approach for the synthesis of N-doped graphene (NDG)/mixed metal oxide (MnCO3–ZrO2) ((X%)NDG/MnCO3–ZrO2), as the (X%)NDG/MnCO3–ZrO2 nano-composite was synthesized using physical grinding of separately synthesized NDG and pre-calcined (300 °C) MnCO3–ZrO2 via green milling method. The structures of the prepared materials were characterized in detail using X-ray powder diffraction (XRD), Field Emission Scanning Electron Microscope (FESEM), Energy Dispersive X-Ray Analysis (EDX), Fourier-transform infrared spectroscopy (FTIR), Raman, Thermogravimetric analysis (TGA), and N2 adsorption-desorption isotherm analysis. Besides, the obtained nanocomposites were employed as heterogeneous oxidation catalyst for the alcohol oxidation using green oxidant O2 without involving any surfactants or bases. The reaction factors were systematically studied during the oxidation of benzyl alcohol (PhCH2OH) as the model reactant to benzaldehyde (PhCHO). The NDG/MnCO3–ZrO2 exhibits premium specific activity (66.7 mmol·g−1·h−1) with 100% conversion of PhCH2OH and > 99.9% selectivity to PhCHO after only 6 min. The mechanochemically prepared NDG based nanocomposite exhibited notable improvement in the catalytic efficacy as well as the surface area compared to the pristine MnCO3–ZrO2. Under the optimal circumstances, the NDG/MnCO3–ZrO2 catalyst could selectively catalyze the aerobic oxidation of a broad array of alcohols to carbonyls with full convertibility without over-oxidized side products like acids. The NDG/MnCO3–ZrO2 catalyst were efficiently reused for six subsequent recycling reactions with a marginal decline in performance and selectivity