Airborne Culturable Fungi in the Indoor and Outdoor Environments of Shrines in Chennai, India

The diversity and concentrations of airborne fungi in the environments of 58 temples across a metropolitan city (Chennai) in India were investigated. Air samples from indoors (within 2 m of the Sanctum sanctorum) and outdoors (at least 10 m away from the Sanctum sanctorum) were collected using the Reuter Centrifugal Sampler (RCS). Of the 90 species isolated, 7 belonged to Zygomycota, 5 to Ascomycota and the remaining 78 to Mitosporic fungi. A total of 3470 colonies were isolated from the indoor environment, which was 13.73% higher than the total recorded outdoors (3051 colonies). An average of 747.7 and 657.5 CFU/m3 of air was recorded in the indoor and outdoor environments, respectively. The predominant species identified in both environments were Aspergillus flavus, A. niger and Cladosporium cladosporioides. While most of the fungal species isolated are considered allergens and pathogens, they can also deteriorate the architecture of shrines. This study indicates the need to implement control measures to minimize the risks of exposure to bioaerosols in public spaces such as shrines

299 A CTS team approach to assess the in vitro toxicity of microplastic fibers to human lung epithelial cells cultured at an air-liquid interface

OBJECTIVES/GOALS: Our goal is to determine whether microplastic fibers (MPFs) provide signals for dendritic cell-induced Th2 polarization via epithelial-cell-derived thymic stromal lymphopoietin (TSLP). We seek to highlight a potential mechanism for MPF-induced airway toxicity associated with asthma exacerbation. METHODS/STUDY POPULATION: Primary human bronchial epithelial cells (NHBEs) were grown and differentiated at an air-liquid interface. Dyed and undyed polyester MPFs (14x45 µm) generated using a cryomicrotome were delivered to NHBEs through a custom designed mesh-hopper system. After the exposure period (6, 12, 24 hrs), cell viability was assessed using alamarBlue, and RT-qPCR was performed to determine mRNA expression of asthma associated genes (i.e., TSLP, IL-13, IL-33, etc.,) in NHBEs. Bulk mRNA-sequencing followed by bioinformatics will be performed to observe other plausible pathways tweaked by lung cell exposure to MPFs. RESULTS/ANTICIPATED RESULTS: Through gravimetric analysis, it was determined that the mesh-hopper system can achieve delivery efficiencies of at least 85% for as low as 500 fibers. Following exposure, results show polyester MPFs (500 - 1,000 fibers) exposed to NHBEs at multiple time points (6, 12, 24 hrs) did not result in a statistically significant decrease in cell viability. Treatment with 500 undyed MPFs resulted in a slight increase in TSLP expression at 6 hrs that decreased over time, whereas all other treatment groups resulted in TSLP downregulation. Similarly, 500 undyed MPFs resulted in an increase in IL-13 expression at both 6 and 12 hrs with all other treatment groups leading to IL-13 downregulation. We anticipate the RNA-seq results will show pro-inflammatory pathways are highly targeted following NHBE exposure to MPFs. DISCUSSION/SIGNIFICANCE: This study is one of the first to mechanistically assess the impact of MPFs on lung cells while simultaneously addressing the need for a reliable system that delivers MPFs to ALI cultures to better mimic inhalation and avoid inadequate resuspension of particles in liquid medium

Adsorption kinetics, equilibrium and thermodynamics of a textile dye V5BN by a natural nanocomplex material: Clinoptilolite

Dyes are considered as a major pollutant released in industrial (leather, textile, and paper) effluents. In this study, the ability of Clinoptilolite in adsorbing an industrial dye (Violet 5BN) was assessed. Clinoptilolite was characterized by Scanning Electron Microscopy, Energy Dispersive analysis using X-ray and Brunauer, Emmett and Teller analysis. Batch studies at varying adsorbent dosage, pH, temperature, and time revealed that 96% of the dye was adsorbed with an adsorbent mass of 1.5 g at 30 °C, pH 5 and reaction time of 90 min. Both Langmuir and Freundlich isotherms were found to be fit, which proves the process to be heterogeneous. The experimental and calculated values of adsorption capacity were almost similar, with correlation coefficients greater than 0.9, thus implying pseudo-second order and intraparticle diffusion as the favorable models. Negative values of ΔG° indicate strong binding energy between the adsorbent and adsorbate, while negative ΔS° values prove less randomness of the process and higher adsorbate concentration on the adsorbent surface due to ion-exchange interaction. The exothermic nature of adsorption is evident from the negative ΔH° recorded. Thermodynamic studies showed the system was a spontaneous and enthalpy driven process, with chemisorption as the predominant mode of adsorption at 30 °C and physisorption at elevated temperatures. The study demonstrates the significance of natural clinoptilolite in environmental protection, as an adsorbent for remediation of dyes

Viable SARS-CoV-2 Delta variant detected in aerosols in a residential setting with a self-isolating college student with COVID-19

The B.1.617.2 (Delta) variant of SARS-CoV-2 emerged in India in October of 2020 and spread widely to over 145 countries, comprising over 99% of genome sequence-confirmed virus in COVID-19 cases of the United States (US) by September 2021. The rise in COVID-19 cases due to the Delta variant coincided with a return to in-person school attendance, straining COVID-19 mitigation plans implemented by educational institutions. Some plans required sick students to self-isolate off-campus, resulting in an unintended consequence: exposure of co-inhabitants of dwellings used by the sick person during isolation. We assessed air and surface samples collected from the bedroom of a self-isolating university student with mild COVID-19 for the presence of SARS-CoV-2. That virus' RNA was detected by real-time reverse-transcription quantitative polymerase chain reaction (rRT-qPCR) in air samples from both an isolation bedroom and a distal, non-isolation room of the same dwelling. SARS-CoV-2 was detected and viable virus was isolated in cell cultures from aerosol samples as well as from the surface of a mobile phone. Genomic sequencing revealed that the virus was a Delta variant SARS-CoV-2 strain. Taken together, the results of this work confirm the presence of viable SARS-CoV-2 within a residential living space of a person with COVID-19 and show potential for transportation of virus-laden aerosols beyond a designated isolation suite to other areas of a single-family home

Assessment of Scanning Mobility Particle Sizer (SMPS) for online monitoring of delivered dose in an in vitro aerosol exposure system

Real-time monitoring of dosimetry is critical to mitigating the constraints of offline measurements. To address this need, the use of the Scanning Mobility Particle Sizer (SMPS) to estimate the dose delivered through the Dosimetric Aerosol in Vitro Inhalation Device (DAVID) was assessed. CuO nanoparticles suspended in ethanol at different concentrations (0.01–10 mg/mL) were aerosolized using a Collison nebulizer and diluted with air at a ratio of either 1:3 (setup 1) or 1:18 (setup 2). From the aerosol volume concentrations measured by the SMPS, density of CuO (6.4 g/cm3), collection time (5–30 min), flow rate (0.5 LPM) and deposition area (0.28 cm2), the mass doses (DoseSMPS) were observed to increase exponentially over time and ranged from 0.02 ± 0.001 to 84.75 ± 3.49 μg/cm2. The doses calculated from the Cu concentrations determined by Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) (DoseICP) also increased exponentially over time (0.01 ± 0.01–97.25 ± 1.30 μg/cm2). Regression analysis between DoseICP and DoseSMPS showed R2 ≥ 0.90 for 0.1–10 mg/mL. As demonstrated, the SMPS can be used to monitor the delivered dose in real-time, and controlled delivery of mass doses with a 226-fold range can be attained in ≤30 min in DAVID by adjusting the nebulizer concentration, dilution air and time.•Controlled delivery of CuO with mass doses in a 226-fold through DAVID, in ≤30 min.•Reliable dosimetry for non-steady state aerosol generation.•Correlation coefficient between DoseICP and DoseSMPS ≥ 0.9 for Cneb 0.1–10 mg/mL.•The use of SMPS for real-time monitoring of delivered dose was demonstrated

Air change rate and SARS-CoV-2 exposure in hospitals and residences: A meta-analysis

As COVID-19 swept across the globe, increased ventilation and implementation of air cleaning were emphasized by the US CDC and WHO as important strategies to reduce the risk of inhalation exposure to the virus. To assess whether higher ventilation and air cleaning rates lead to lower exposure risk to SARS-CoV-2, 1274 manuscripts published between April 2020 and September 2022 were screened using key words "airborne SARS-CoV-2 or "SARS-CoV-2 aerosol." Ninety-three studies involved air sampling at locations with known sources (hospitals and residences) were selected and associated data were compiled. Two metrics were used to assess exposure risk: SARS-CoV-2 concentration and SARS-CoV-2 detection rate in air samples. Locations were categorized by type (hospital or residence) and proximity to the location housing the isolated/quarantined patient (primary or secondary). The results showed that hospital wards had lower airborne virus concentrations than residential isolation rooms. A negative correlation was found between airborne virus concentrations in primary-occupancy areas and air changes per hour (ACH). In hospital settings, sample positivity rates were significantly reduced in secondary-occupancy areas compared to primary-occupancy areas, but they were similar across sampling locations in residential settings. ACH and sample positivity rates were negatively correlated, though the effect was diminished when ACH values exceeded 8. While limitations associated with diverse sampling protocols exist, data considered by this meta-analysis support the notion that higher ACH may reduce exposure risks to the virus in ambient air. Copyright © 2024 American Association for Aerosol Researc

126 A CTS team approach to reliable delivery of aerosols to lung cells at the air-liquid interface (ALI), through Dosimetric Aerosol in Vitro Inhalation Device (DAVID)

OBJECTIVES/GOALS: In vitro models that mimic the human respiratory system are needed to assess the toxicity of inhaled contaminants. Therefore, our goal is to establish a Dosimetric Aerosol in-Vitro Inhalation Device (DAVID) that delivers aerosols in different patterns to human lung cells cultured at an air-liquid interface (ALI). METHODS/STUDY POPULATION: The collection unit of DAVID was modified in this study to accommodate different deposition patterns (spots, annular ring, rectangle & circle). CuO aerosols of varying concentrations were generated using a 6-jet Collison nebulizer for varying time periods to achieve different doses. To quantify the doses that were delivered to cells, the samples were digested with nitric acid & analyzed by Inductively Coupled Plasma-Optical Emission Spectrometry. Following the exposure of A549 cells to CuO aerosols, cytotoxicity and mRNA expression (i.e., HMOX1 & IL-8) will be assessed via LDH and RT-qPCR to determine the effect of regional (mass deposited/area of the pattern) and global (mass deposited/area of the cell culture insert) doses in cells. RESULTS/ANTICIPATED RESULTS: The deposition areas covered by rectangular, spot, annular ring, and circular patterns are estimated to be 6, 17, 27 and 85% of the insert’s surface area, onto which cells are cultured. Results for the patterns tested (spots and annular ring) show that both the regional and global doses were greater for spots than annular ring. Also, the regional doses were higher than global doses. Irrespective of the patterns, the global doses were the same for nebulizer suspensions of 0.1-1 mg/mL. Statistical analysis by ANOVA revealed there was no significant difference in doses between replicate inserts used in the same trial. We anticipate that regional doses with aerosol deposition to a larger surface area of the cell culture insert will correspond with higher cytotoxicity and mRNA expression of HMOX1 and IL-8 in cells. DISCUSSION/SIGNIFICANCE: There are limited in vitro exposure systems that can efficiently deliver aerosols to lung cells, while also mimicking inhalation by humans. In addition to addressing this knowledge gap, we will show the role of regional & global doses in studying cellular response & the ability of DAVID to deliver aerosols in different deposition patterns

The BioCascade-VIVAS system for collection and delivery of virus-laden size-fractionated airborne particles

The size of virus-laden particles determines whether aerosol or droplet transmission is dominant in the airborne transmission of pathogens. Determining dominant transmission pathways is critical to implementing effective exposure risk mitigation strategies. The aerobiology discipline greatly needs an air sampling system that can collect virus-laden airborne particles, separate them by particle diameter, and deliver them directly onto host cells without inactivating virus or killing cells. We report the use of a testing system that combines a BioAerosol Nebulizing Generator (BANG) to aerosolize Human coronavirus (HCoV)-OC43 (OC43) and an integrated air sampling system comprised of a BioCascade impactor (BC) and Viable Virus Aerosol Sampler (VIVAS), together referred to as BC-VIVAS, to deliver the aerosolized virus directly onto Vero E6 cells. Particles were collected into four stages according to their aerodynamic diameter (Stage 1: >9.43 μm, Stage 2: 3.81–9.43 μm, Stage 3: 1.41–3.81 μm and Stage 4: <1.41 μm). OC43 was detected by reverse-transcription quantitative polymerase chain reaction (RT-qPCR) analyses of samples from all BC-VIVAS stages. The calculated OC43 genome equivalent counts per cm3 of air ranged from 0.34 ± 0.09 to 70.28 ± 12.56, with the highest concentrations in stage 3 (1.41–3.81 μm) and stage 4 (<1.41 μm). Virus-induced cytopathic effects appeared only in cells exposed to particles collected in stages 3 and 4, demonstrating the presence of viable OC43 in particles <3.81 μm. This study demonstrates the dual utility of the BC-VIVAS as particle size-fractionating air sampler and a direct exposure system for aerosolized viruses. Such utility may help minimize conventional post-collection sample processing time required to assess the viability of airborne viruses and increase the understanding about transmission pathways for airborne pathogens. •Viable OC43 was present in particles <3.81 μm.•Direct delivery of viable OC43 to host cells through the BC-VIVAS was demonstrated.•Dual utility of BC-VIVAS as an air sampler and exposure system was proven