Structure Guided Design of Potent and Selective Ponatinib-Based Hybrid Inhibitors for RIPK1

SummaryRIPK1 and RIPK3, two closely related RIPK family members, have emerged as important regulators of pathologic cell death and inflammation. In the current work, we report that the Bcr-Abl inhibitor and anti-leukemia agent ponatinib is also a first-in-class dual inhibitor of RIPK1 and RIPK3. Ponatinib potently inhibited multiple paradigms of RIPK1- and RIPK3-dependent cell death and inflammatory tumor necrosis factor alpha (TNF-α) gene transcription. We further describe design strategies that utilize the ponatinib scaffold to develop two classes of inhibitors (CS and PN series), each with greatly improved selectivity for RIPK1. In particular, we detail the development of PN10, a highly potent and selective “hybrid” RIPK1 inhibitor, capturing the best properties of two different allosteric RIPK1 inhibitors, ponatinib and necrostatin-1. Finally, we show that RIPK1 inhibitors from both classes are powerful blockers of TNF-induced injury in vivo. Altogether, these findings outline promising candidate molecules and design approaches for targeting RIPK1- and RIPK3-driven inflammatory pathologies

Evaluation of Handheld Assays for the Detection of Ricin and Staphylococcal Enterotoxin B in Disinfected Waters

Development of a rapid field test is needed capable of determining if field supplies of water are safe to drink by the warfighter during a military operation. The present study sought to assess the effectiveness of handheld assays (HHAs) in detecting ricin and Staphylococcal Enterotoxin B (SEB) in water. Performance of HHAs was evaluated in formulated tap water with and without chlorine, reverse osmosis water (RO) with chlorine, and RO with bromine. Each matrix was prepared, spiked with ricin or SEB at multiple concentrations, and then loaded onto HHAs. HHAs were allowed to develop and then read visually. Limits of detection (LOD) were determined for all HHAs in each water type. Both ricin and SEB were detected by HHAs in formulated tap water at or below the suggested health effect levels of 455 ng/mL and 4.55 ng/mL, respectively. However, in brominated or chlorinated waters, LODs for SEB increased to approximately 2,500 ng/mL. LODs for ricin increased in chlorinated water, but still remained below the suggested health effect level. In brominated water, the LOD for ricin increased to approximately 2,500 ng/mL. In conclusion, the HHAs tested were less effective at detecting ricin and SEB in disinfected water, as currently configured

Leakage power analysis and optimization in deep -submicron technologies under process variation.

Technology scaling has taken circuit performance to unprecedented levels in the deep submicron regime. Although, each technology generation brings about great improvements in circuit density and performance, there is also a tremendous accompanying increase in power consumption. With portable electronics becoming the focus of the semiconductor industry, power has increasingly become a major consideration for circuit designers. Up to the 0.25 mum technology generation, power consumption was dominated by switching power. However, aggressive scaling of gate length has led to a strong rise in subthreshold leakage power consumption. Over the last few technology generations, leakage has become an increasingly significant proportion of the total power. At the 65nm node, the contribution of leakage power is projected to reach 54% of the total power, and is expected to grow with each technology generation. Leakage power analysis and reduction is an actively researched field, with various techniques approaching this problem from various different aspects. This dissertation primarily deals with analyzing the impact of threshold voltage and gate-length on leakage and approaches analysis and optimization techniques at the device, cell and design level. At the device level, we analyze lithographic imperfections and their impact on device leakage. We also propose a method to utilize non-uniform lithographic patterns to create devices that have better delay and leakage characteristics than standard rectangular devices. At the cell-level we propose standard-cell enhancement techniques involving multiple gate length assignment. We discuss a scheme for creating an enhanced standardcell library by assigning different gate lengths to different devices in a cell. The enhanced library can be used by a circuit optimizer for leakage and variability reduction. Finally we propose design optimization methods to accurately and efficiently perform sizing, threshold voltage and gate length assignment simultaneously. We also propose transistor-level static timing and power analysis methods for power optimization of custom circuits. In summary, this dissertation highlights the need to accurately analyze and optimize leakage power in the deep-submicron regime. It proposes several approaches towards the goal of supporting technology scaling, allowing designers and process engineers to continue improving circuit performance and density, without increasing power-limited yield loss.Ph.D.Applied SciencesElectrical engineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/126966/2/3287629.pd

Organophosphorus hydrolase at the air-water interface: Secondary structure and interaction with paraoxon

The secondary structure of organophosphorus hydrolase (OPH) at the air-water interface was studied using polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS). The shape and position of the amide I and amide II bands were used to estimate the surface conformation and orientation of OPH. The PM-IRRAS results indicated that the enzyme did not unfold for the range of surface pressure used (0-30 mN/m). At low surface pressures, the signal of amide I was very weak and the intensity was almost the same as amide II. Upon further compression, the PM-IRRAS signal and the ratio of the intensity of amide I and amide II both increase, implying an increased interfacial concentration of the enzyme. From the amide I/amide II ratio and the band position, it was deduced that the enzyme adopts a conformation which gives a higher occupied surface at low surface pressure and rotates to a more vertical orientation at high surface pressures. The compression and decompression of the OPH monolayer indicated that the fingerprint of the secondary structure at the air-water interface was reversible. PM-IRRAS was also used to investigate the pH effect of the subphase on the secondary structure of OPH. The secondary structure of OPH at the air-water interface was well defined when the pH of the subphase was near its isoelectric point (IP, pH 7.6). However, it adopted a different orientation when the subphase pH values were higher or lower than the IP with formation of random coil structure. The hydrolysis of organophosphorus compound paraoxon by OPH was also studied at the air-water interface by PM-IRRAS. The pH effect and the interaction with paraoxon both seem to orientate the enzyme more in the plane of the interface and to produce random coil structure

Systematic Evaluation of the Efficacy of Chlorine Dioxide in Decontamination of Building Interior Surfaces Contaminated with Anthrax Spores▿

Efficacy of chlorine dioxide (CD) gas generated by two distinct generation systems, Sabre (wet system with gas generated in water) and ClorDiSys (dry system with gas generated in air), was evaluated for inactivation of Bacillus anthracis spores on six building interior surfaces. The six building materials included carpet, acoustic ceiling tile, unpainted cinder block, painted I-beam steel, painted wallboard, and unpainted pinewood. There was no statistically significant difference in the data due to the CD generation technology at a 95% confidence level. Note that a common method of CD gas measurement was used for both wet and dry CD generation types. Doses generated by combinations of different concentrations of CD gas (500, 1,000, 1,500, or 3,000 parts per million of volume [ppmv]) and exposure times (ranging between 0.5 and 12 h) were used to evaluate the relative role of fumigant exposure period and total dose in the decontamination of building surfaces. The results showed that the time required to achieve at least a 6-log reduction in viable spores is clearly a function of the material type on which the spores are inoculated. The wood and cinder block coupons required a longer exposure time to achieve a 6-log reduction. The only material showing a clear statistical difference in rate of decay of viable spores as a function of concentration was cinder block. For all other materials, the profile of spore kill (i.e., change in number of viable spores with exposure time) was not dependent upon fumigant concentration (500 to 3,000 ppmv). The CD dose required for complete spore kill on biological indicators (typically, 1E6 spores of Bacillus atrophaeus on stainless steel) was significantly less than that required for decontamination of most of the building materials tested

Infrared reflection-absorption spectroscopy and polarization-modulated infrared reflection-absorption spectroscopy studies of the organophosphorus acid anhydrolase langmuir monolayer

The secondary structure of the organophosphorus acid anhydrolase (OPAA) Langmuir monolayer in the absence and presence of diisopropylfluorophosphate (DFP) in the subphase was studied by infrared reflection-absorption spectroscopy (IRRAS) and polarization-modulated IRRAS (PM-IRRAS). The results of both the IRRAS and the PM-IRRAS indicated that the alpha-helix and the beta-sheet conformations in OPAA were parallel to the air-water interface at a surface pressure of 0 mN.m-1 in the absence of DFP in the subphase. When the surface pressure increased, the alpha-helix and the beta-sheet conformations became tilted. When DFP was added to the subphase at a concentration of 1.1 x 10(-5) M, the alpha-helix conformation of OPAA was still parallel to the air-water interface, whereas the beta-sheet conformation was perpendicular at 0 mN.m-1. The orientations of both the alpha-helix and the beta-sheet conformations did not change with the increase of surface pressure. The shape of OPAA molecules is supposed to be elliptic, and the long axis of OPAA was parallel to the air-water interface in the absence of DFP in the subphase, whereas the long axis became perpendicular in the presence of DFP. This result explains the decrease of the limiting molecular area of the OPAA Langmuir monolayer when DFP was dissolved in the subphase

Detection of organophosphorus compounds by covalently immobilized organophosphorus hydrolase

As a consequence of organophosphorus (OP) toxins posing a threat to human life globally, organophosphorus hydrolase (OPH) has become the enzyme of choice to detoxify such compounds. Organophosphorus hydrolase was covalently immobilized onto a quartz substrate for utilization in paraoxon detection. The substrate was cleaned and modified prior to chemical attachment. Each modification step was monitored by imaging ellipsometry as the thickness increased with each modification step. The chemically attached OPH was labeled with a fluorescent dye (7-isothiocyanato-4-methylcoumarin) for the detection of paraoxon in aqueous solution, ranging from 10(-9) to 10(-5) M. UV-visible spectra were also acquired for the determination of the hydrolysis product of para-oxon, namely p-nitrophenol

Organophosphorus acid anhydrolase bio-template for the synthesis of CdS quantum dots

A direct conjugation of organophosphorus acid anhydrolase (OPAA) with CdS quantum dots was prepared via arrested precipitation within the enzyme matrix. The bio-conjugate was found not only to retain enzyme conformational structure but also to retain enzyme activity and be effective at detecting diisopropyl fluorophosphate (DFP) at the micro molar level

Structure Guided Design of Potent and Selective Ponatinib-Based Hybrid Inhibitors for RIPK1

RIPK1 and RIPK3, two closely related RIPK family members, have emerged as important regulators of pathologic cell death and inflammation. In the current work, we report that the Bcr-Abl inhibitor and anti-leukemia agent ponatinib is also a first-in-class dual inhibitor of RIPK1 and RIPK3. Ponatinib potently inhibited multiple paradigms of RIPK1- and RIPK3-dependent cell death and inflammatory tumor necrosis factor alpha (TNF-α) gene transcription. We further describe design strategies that utilize the ponatinib scaffold to develop two classes of inhibitors (CS and PN series), each with greatly improved selectivity for RIPK1. In particular, we detail the development of PN10, a highly potent and selective “hybrid” RIPK1 inhibitor, capturing the best properties of two different allosteric RIPK1 inhibitors, ponatinib and necrostatin-1. Finally, we show that RIPK1 inhibitors from both classes are powerful blockers of TNF-induced injury in vivo. Altogether, these findings outline promising candidate molecules and design approaches for targeting RIPK1- and RIPK3-driven inflammatory pathologies