Observer based feedback control of 3rd order LCC resonant converters

The paper considers specific issues related to the design and realisation of observer-based feedback of isolated output voltage for resonant power converters. To provide a focus to the study, a 3rd order LCC converter is employed as a candidate topology. It is shown that whilst resonant converters nominally operate at high switching frequencies to facilitate the use of small reactive components, by appropriate pre-conditioning of non-isolated resonant-tank voltages and currents, the resulting observer can be implemented at relatively low sampling frequencies, and hence, take advantage of low-cost digital hardware. Experimental results are used to demonstrate the accuracy of observer estimates under both transient and steady-state operating conditions, and to show operation of the observer as part of a closed-loop feedback system where the LCC resonant converter is used as a regulated power supply

Explicit Solution of the Time Domain Volume Integral Equation Using a Stable Predictor-Corrector Scheme

An explicit marching-on-in-time (MOT) scheme for solving the time domain volume integral equation is presented. The proposed method achieves its stability by employing, at each time step, a corrector scheme, which updates/corrects fields computed by the explicit predictor scheme. The proposedmethod is computationally more efficient when compared to the existing filtering techniques used for the stabilization of explicit MOT schemes. Numerical results presented in this paper demonstrate that the proposed method maintains its stability even when applied to the analysis of electromagnetic wave interactions with electrically large structures meshed using approximately half a million discretization elements

Cyclic-averaging for high-speed analysis of resonant converters

Abstract—The paper describes the development and application of a cyclic-averaging technique for the rapid analysis of high-order resonant power converters. To provide a focus to the paper, particular emphasis is given to a 3rd-order LCC voltage output converter topology. The proposed methodology predicts steady-state voltages and currents throughout the circuit, and provides estimates of the stresses on the resonant circuit components. State-space simulations and experimental results from a 350 V-input/150 V-output converter are used to demonstrate a prediction accuracy comparable with time-domain integration-based techniques is achievable, while requiring only 1/10,000th of the computation time. In addition, a comparison with Spice simulation results shows that cyclic averaging provides commensurate predictions of voltage and current stresses on the resonant circuit components. Issues arising from the stray capacitance associated with the resonant inductor, and the corresponding sensitivity of the predicted output voltage, are also considered

Wind tunnel and analytical investigation of over-the-wing propulsion/air frame interferences for a short-haul aircraft at Mach numbers from 0.6 to 0.78

Results of analytical calculations and wind tunnel tests at cruise speeds of a representative four engine short haul aircraft employing upper surface blowing (USB) with a supercritical wing are discussed. Wind tunnel tests covered a range of Mach number M from 0.6 to 0.78. Tests explored the use of three USB nozzle configurations. Results are shown for the isolated wing body and for each of the three nozzle types installed. Experimental results indicate that a low angle nacelle and streamline contoured nacelle yielded the same interference drag at the design Mach number. A high angle powered lift nacelle had higher interference drag primarily because of nacelle boattail low pressures and flow separation. Results of varying the spacing between the nacelles and the use of trailing edge flap deflections, wing upper surface contouring, and a convergent-divergent nozzle to reduce potential adverse jet effects were also discussed. Analytical comparisons with experimental data, made for selected cases, indicate favorable agreement

Growth, processing, and optical properties of epitaxial Er_2O_3 on silicon

Erbium-doped materials have been investigated for generating and amplifying light in low-power chip-scale optical networks on silicon, but several effects limit their performance in dense microphotonic applications. Stoichiometric ionic crystals are a potential alternative that achieve an Er^(3+) density 100× greater. We report the growth, processing, material characterization, and optical properties of single-crystal Er_2O_3 epitaxially grown on silicon. A peak Er^(3+) resonant absorption of 364 dB/cm at 1535nm with minimal background loss places a high limit on potential gain. Using high-quality microdisk resonators, we conduct thorough C/L-band radiative efficiency and lifetime measurements and observe strong upconverted luminescence near 550 and 670 nm

Off-Diagonal Long-Range Order in Bose Liquids: Irrotational Flow and Quantization of Circulation

On the basis of gauge invariance, it is proven in an elementary and straightforward manner, but without invoking any {\it ad hoc} assumption, that the existence of off-diagonal long-range order in one-particle reduced density matrix in Bose liquids implies both the irrotational flow in a simply connected region and the quantization of circulation in a multiply connected region, the two fundamental properties of a Bose superfluid. The origin for both is the phase coherence of condensate wave-functions. Some relevant issues are also addressed.Comment: Revtex, 4 pages, no figure

Deriving Bisimulation Congruences: 2-categories vs precategories

G-relative pushouts (GRPOs) have recently been proposed by the authors as a new foundation for Leifer and Milner’s approach to deriving labelled bisimulation congruences from reduction systems. This paper develops the theory of GRPOs further, arguing that they provide a simple and powerful basis towards a comprehensive solution. As an example, we construct GRPOs in a category of ‘bunches and wirings.’ We then examine the approach based on Milner’s precategories and Leifer’s functorial reactive systems, and show that it can be recast in a much simpler way into the 2-categorical theory of GRPOs

Analysis of voltage output LCC resonant converters, including boost mode operation

A novel methodology for the high-speed analysis of LCC voltage output resonant power converters is presented. Termed rectifier transformed fundamental mode analysis, the procedure employs describing functions for determining equivalent passive circuit models for the combined rectifier, output filter and load circuitry. The resulting passive network is then used to predict voltages and currents throughout the converter. A refinement algorithm is also described that further enhances the accuracy of the analysis. Unlike previously published techniques, the proposed procedure is shown to accurately predict converter operation in the boost mode; a mode that normally requires the incorporation of an additional step-up transformer to realise output voltages that are higher than the input voltage in the converter topology under consideration. The accuracy of the procedure, and the enhancement that results from the refinement process, is demonstrated by comparing predictions of the maximum output voltage of LCC converters as a function of load, and the regulation at a fixed switching frequency as a function of the parallel rectifier capacitance with measurements from prototype converters, including operation in boost mode. The results confirm that the methodology is capable of correctly predicting the steady-state behaviour of voltage output LCC series resonant converters, particularly around the resonant frequency where previously published techniques can exhibit significant error

Quantum models of classical mechanics: maximum entropy packets

In a previous paper, a project of constructing quantum models of classical properties has been started. The present paper concludes the project by turning to classical mechanics. The quantum states that maximize entropy for given averages and variances of coordinates and momenta are called ME packets. They generalize the Gaussian wave packets. A non-trivial extension of the partition-function method of probability calculus to quantum mechanics is given. Non-commutativity of quantum variables limits its usefulness. Still, the general form of the state operators of ME packets is obtained with its help. The diagonal representation of the operators is found. A general way of calculating averages that can replace the partition function method is described. Classical mechanics is reinterpreted as a statistical theory. Classical trajectories are replaced by classical ME packets. Quantum states approximate classical ones if the product of the coordinate and momentum variances is much larger than Planck constant. Thus, ME packets with large variances follow their classical counterparts better than Gaussian wave packets.Comment: 26 pages, no figure. Introduction and the section on classical limit are extended, new references added. Definitive version accepted by Found. Phy

A microscopic model for Josephson currents

A microscopic model of a Josephson junction between two superconducting plates is proposed and analysed. For this model, the nonequilibrium steady state of the total system is explicitly constructed and its properties are analysed. In particular, the Josephson current is rigorously computed as a function of the phase difference of the two plates and the typical properties of the Josephson current are recovered