43 research outputs found
Investigation on Durability Performance in Early Aged High-Performance Concrete Containing GGBFS and FA
The significance of concrete durability increases since RC (Reinforced Concrete) structures undergo degradation due to aggressive environmental conditions, which affects structural safety and serviceability. Steel corrosion is the major cause for the unexpected failure of RC structures. The main cause for the corrosion initiation is the ingress of chloride ions prevailing in the environment. Hence quantitative evaluation of chloride diffusion becomes very important to obtain a chloride diffusion coefficient and resistance to chloride ion intrusion. In the present investigation, 15 mix proportions with 3 water-to-binder ratios (0.37, 0.42, and 0.47) and 3 replacement ratios (0, 30, and 50%) were prepared for HPC (high-performance concrete) with fly-ash and ground granulated blast furnace slag. Chloride diffusion coefficient was measured under nonstationary condition. In order to evaluate the microstructure characteristics, porosity through MIP was also measured. The results of compressive strength, chloride diffusion, and porosity are compared with electrical charges. This paper deals with the results of the concrete samples exposed for only 2 months, but it is a part of the total test plan for 100 years. From the work, time-dependent diffusion coefficients in HPC and the key parameters for durability design are proposed
Combined Effects of Set Retarders and Polymer Powder on the Properties of Calcium Sulfoaluminate Blended Cement Systems
This study investigates the effects of set retarders on the properties of polymer-modified calcium sulfoaluminate (CSA) and Portland cement blend systems at early and long-term ages. The fast setting of the cement blend systems is typically adjusted by using retarders to ensure an adequate workability. However, how the addition of retarders influences the age-dependent characteristics of the cement blend systems was rarely investigated. This study particularly examines the effects of retarders on the microstructure and strength development of polymer-modified CSA and Portland cement blend pastes and mortars from 2 h to 90 days. The macro- and microstructural properties are characterized by compression testing, powder X-ray diffraction, mercury intrusion porosimetry, and scanning electron microscopy with energy dispersive spectroscopy. The test results reveal that the use of retarders delayed the strength development of the cement blend systems at the very early age by hindering the production of ettringite, which was cumulative to the delaying effect of polymer, but it increased the ultimate strength by creating denser and finer pore structures with the evolution of hydration products
Tensile Behavior and Cracking Pattern of an Ultra-High Performance Mortar Reinforced by Polyethylene Fiber
This paper presents an experimental study of the compressive strength, tensile behavior (including the tensile strength, tensile strain capacity, and toughness), and cracking patterns of an ultra-high performance mortar (UHPM) reinforced by polyethylene (PE) fiber as well as a discussion of the different tensile behaviors of the UHPM according to the types and contents of fibers used. The UHPM reinforced by microsteel fiber of 1.5 vol% and the UHPM reinforced by PE fibers with three different fiber contents were designed and prepared. A series of experiments was undertaken to assess the effect of PE fiber on the properties of the UHPM. The results found a lower strength level, higher tensile strain capacity and toughness, and a larger crack width in the PE fiber-reinforced UHPM compared to microsteel fiber-reinforced UHPM. It was also demonstrated that tensile strain capacity and toughness of 4.05% and 0.454 MPa m/m, respectively, can be attained when using the proposed polyethylene-fiber-reinforced UHPM
Long-Term Deflection of Prestressed Concrete Bridge Considering Nonuniform Shrinkage and Crack Propagation by Equivalent Load Approach
Long-span prestressed concrete (PSC) bridges often suffer excessive deflection during their service lives. The nonuniform shrinkage strains of concrete caused by uneven moisture distributions can induce significant additional deflections, when combined with the creep and cracking of the concrete. Current design practices usually overlook these factors, and the few proposed approaches to consider them are complex and computationally expensive. This study proposes a simplified approach for considering the effect of nonuniform shrinkage by using the equivalent load concept in combination with a nonlinear analysis of the creep and cracking using three-dimensional finite element models. The long-term deflections of short-, medium-, and long-span PSC bridges are calculated under the combined effects of creep, shrinkage, and cracking. The results show that the nonuniform shrinkage effect is significant in medium- to long-span bridges, and that the cracking of the concrete reduces the stiffness, thereby increasing the long-term deflection of the bridges (more severely so in combination with creep and shrinkage). The predicted long-term deflections reasonably agree with the measured data. Thus, the equivalent load approach is effective for calculating long-term deflections considering nonuniform shrinkage strains, without the complicated and expensive coupling of moisture transport and structural analyses
Recovery of Chloride Penetration Resistance of Cement-Based Composites Due to Self-Healing of Cracks
This study proposed a method of applying coating on uncracked surfaces of test specimens in the electrical migration–diffusion test for the evaluation of the chloride penetration resistance of cracked cement-based composites. It was shown that, by applying the proposed method, the recovery of the chloride penetration resistance from self-healing of cracks can be evaluated more accurately because the application of surface coating reduces the test time and the error introduced by over-simplification. Based on observations of the self-healing-induced recovery of chloride penetration resistance, a phenomenological model for predicting the progress of crack self-healing in cement-based composites was suggested. This model is expected to evaluate the chloride penetration resistance more accurately in actual concrete structures with cracks
Effects of Long-Wavelength Track Irregularities Due to Thermal Deformations of Railway Bridge on Dynamic Response of Running Train
In a fixed-end arch railway bridge restraining the displacement and rotation at the support to constrain the longitudinal deformation of the superstructure, vertical deformation occurs according to temperature change. Due to such deformation, periodic change in long-wavelength track irregularity occurs, which, by increasing the vertical train body acceleration, degrades ride comfort. In the present study, the vertical deformation of a fixed-end arch railway bridge and the accompanying track irregularity changes were measured during the summer and winter, respectively. Based on the measured data, the relationships among the ambient temperature, the temperature of the bridge members, the deformation of the bridge, and the track irregularity were investigated. Additionally, the correlation between the train body acceleration and the long-wavelength track irregularity was examined, and a method of controlling long-wavelength track irregularity considering seasonal temperature change was discussed
Using the Steady-State Chloride Migration Test to Evaluate the Self-Healing Capacity of Cracked Mortars Containing Crystalline, Expansive, and Swelling Admixtures
Interest in self-healing-crack technologies for cement-based materials has been growing, but research into such materials remains in the early stage of development and standardized methods for evaluating healing capacity have not yet been established. Therefore, this study proposes a test method to evaluate the self-healing capacity of cement-based materials in terms of their resistance to chloride penetration. For this purpose, the steady-state chloride migration test has been used to measure the diffusion coefficients of cracked mortar specimens containing crystalline, expansive, and swelling admixtures. The results of the present study show that the time to reach a quasi-steady-state decreased and the diffusion coefficients increased as the potential increased because of the potential drop inside the migration cell and self-healing that occurred during the test. Therefore, use of a high potential is recommended to minimize the test duration, as long as the temperature does not rise too much during the test. Using this test method, the self-healing capacity of the new self-healing technologies can be evaluated, and an index of self-healing capacity is proposed based on the rate of charged chloride ions passing through a crack
Mechanical Recovery of Cracked Fiber-Reinforced Mortar Incorporating Crystalline Admixture, Expansive Agent, and Geomaterial
Sponge behaviors of functionalized few-walled carbon nanotubes
Few-walled carbon nanotube (FWCNT) was functionalized with two different natures of functional groups in a mild poly(phosphoric acid) (PPA)/phosphorus pentoxide (P(2)O(5)). The one is less polar 4-ethylbenzoyl-functionalized FWCNT (EB-FWCNT) and the other is more polar 4-(aminomethyl)benzoyl-functionalized FWCNT (AB-FWCNT). The degrees of their functionalities were estimated by thermogravimetric analysis (TGA) and they had one functional group per average 17.7 and 25.3 carbon atoms, respectively. Contrary to expectation, the amount of bound water in the EB-FWCNT was 96.6 wt % and it is higher than that for AB-FWCNT (82.3 wt %). The unusual sponge behavior of EB-FWCNT is attributed to higher hydration energy as determined based on molecular simulation studies. The electrochemical behaviors are also greatly different between the EB- and AB-FWCNT.close2