Role of intermediate phase for stable cycling of Na_7V_4(P_2O_7)_4PO_4 in sodium ion battery

Sodium ion batteries offer promising opportunities in emerging utility grid applications because of the low cost of raw materials, yet low energy density and limited cycle life remain critical drawbacks in their electrochemical operations. Herein, we report a vanadium-based ortho-diphosphate, Na_7V_4(P_2O_7)_4PO_4, or VODP, that significantly reduces all these drawbacks. Indeed, VODP exhibits single-valued voltage plateaus at 3.88 V vs. Na/Na+ while retaining substantial capacity (>78%) over 1,000 cycles. Electronic structure calculations reveal that the remarkable single plateau and cycle life originate from an intermediate phase (a very shallow voltage step) that is similar both in the energy level and lattice parameters to those of fully intercalated and deintercalated states. We propose a theoretical scheme in which the reaction barrier that arises from lattice mismatches can be evaluated by using a simple energetic consideration, suggesting that the presence of intermediate phases is beneficial for cell kinetics by buffering the differences in lattice parameters between initial and final phases. We expect these insights into the role of intermediate phases found for VODP hold in general and thus provide a helpful guideline in the further understanding and design of battery materials

BOAO Photometric Survey of Galactic Open Clusters. III. Czernik 24 and Czernik 27

We present BV CCD photometry for the open clusters Czernik 24 and Czernik 27. These clusters have never been studied before, and we provide, for the first time, the cluster parameters; reddening, distance, metallicity and age. Czernik 24 is an old open cluster with age 1.8 +/- 0.2 Gyr, metallicity [Fe/H]=-0.41 +/- 0.15 dex, distance modulus (m-M)_0 = 13.1 +/- 0.3 mag (d=4.1 +/- 0.5 kpc), and reddening E(B-V) = 0.54 +/- 0.12 mag. The parameters for Czernik 27 are estimated to be age = 0.63 +/- 0.07 Gyr, [Fe/H]= -0.02 +/- 0.10 dex, (m-M)_0 = 13.8 +/- 0.2 mag (d=5.8 +/- 0.5 kpc), and E(B-V) = 0.15 +/- 0.05 mag. The metallicity and distance values for Czernik 24 are consistent with the relation between the metallicity and the Galactocentric distance of other old open clusters. We find the metallicity gradient of 51 old open clusters including Czernik 24 to be Delta [Fe/H]/Delta R_gc= -0.064 +/- 0.009 dex/kpc.Comment: Accepted by the Journal of the Korean Astronomical Society, 2005 December issu

Efficacies of the new Paclitaxel-eluting Coroflex Please™ Stent in percutaneous coronary intervention; comparison of efficacy between Coroflex Please™ and Taxus™ (ECO-PLEASANT) trial: study rationale and design

<p>Abstract</p> <p>Background</p> <p>Previous randomized trials have showed the superiority of Paclitaxel-eluting stent over bare metal stent in angiographic and clinical outcomes. Coroflex Please™ stent is a newly developed drug eluting stent using the Coroflex™ stent platform combined with the drug paclitaxel contained in a polymer coating. PECOPS I trial, one-arm observational study, showed that the clinical and angiographic outcomes of Coroflex Please™ stent were within the range of those of Taxus, the 1^stgeneration paclitaxel-eluting stent (PES). However, there have been no studies directly comparing the Coroflex Please™ stent with the Taxus Liberte™ stent that is the newest version of Taxus. Therefore, prospective, randomized trial is required to demonstrate the non-inferiority of Coroflex Please™ stent compared with Taxus Liberte™ stent in a head-to-head manner.</p> <p>Methods</p> <p>In the comparison of Efficacy between COroflex PLEASe™ ANd Taxus™ stent(ECO-PLEASANT) trial, approximately 900 patients are being prospectively and randomly assigned to the either type of Coroflex Please™ stent and Taxus Liberte™ stent via web-based randomization. The primary endpoint is clinically driven target vessel revascularization at 9 months. The secondary endpoints include major cardiac adverse events, target vessel failure, stent thrombosis and angiographic efficacy endpoints.</p> <p>Discussion</p> <p>The ECO-PLEASANT trial is the study not yet performed to directly compare the efficacy and safety of the Coroflex Please™ versus Taxus Liberte™ stent. On the basis of this trial, we will be able to find out whether the Coroflex Please™ stent is non-inferior to Taxus Liberte™ stent or not.</p> <p>Trial registration</p> <p>ClinicalTrials.gov number, NCT00699543.</p

A study on miscibility properties of polyacrylonitrile blending films with biodegradable polymer, shellac

Polyacrylonitrile (PAN) films blended with shellac, biodegradable polymer, were prepared via simple solution casting method. The miscibility of PAN with shellac polymer was investigated and the optimal concentration of shellac in terms of hydrogen bonding between shellac and PAN chain was determined to be used as a novel biomass carbon precursor. Shellac and PAN chain could exert interaction and the interaction facilitates to loose the crystalline structure of the PAN chain, suggesting that the decrease of the oxidation temperature of the PAN chain in the PAN/shellac blends film by the introduction of shellac segments. The optimal PAN/shellac blends film exhibited outstanding mechanical performances (73.8% higher tensile strength, 60% higher storage modulus compared with control PAN film) showing homogeneous blending state

Electron beam lithography-assisted fabrication of Au nano-dot array as a substrate of a correlated AFM and confocal Raman spectroscopy

This paper documents a study of an Au nano-dot array that was fabricated by electron beam lithography oil a glass wafer. The patterns that had features of 100 rim dots in diameter with a 2-mu m pitch comprised a total area of 200 x 200 mu m(2). The dot-shaped Cr underlayer was open to the air after developing Poly(methyl methacrylate) (PMMA). When dipped into the Cr etchant, the exposed Cr layer was eliminated from the glass wafer in a short period of time. In order to ultimately fabricate the Ti/Au dot arrays, Ti and Au were deposited onto the arrays with a thickness of 2 and 40 nm, respectively. The lift off procedure was carried out in the Cr etchant using sonication in order to completely remove the residual Cr/PMMA layer. The fabricated Au nano-dot array was then immersed in an Ag enhancing solution and then into an ethanol solution containing (N-(6-(Biotinamido)hexyl)-3&apos;-(2&apos;-pyridyldithio)-propionamide (Biotin-HPDP). The substrate was analyzed using a correlated atomic force microscopy (AFM) and confocal Raman spectroscopy. Through this procedure, position-dependent surface-enhanced Raman spectroscopy (SERS) signals could be obtained. (C) 2008 Elsevier B.V. All rights reserved

Health effects of PM2.5 constituents and source contributions in major metropolitan cities, South Korea

© 2022, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.Ambient PM2.5 is one of the major risk factors for human health, and is not fully explained solely by mass concentration. We examined the short-term associations of cause-specific mortality (i.e., all-cause, cardiovascular, and respiratory mortality) with the 15 chemical constituents and sources of PM2.5 in four metropolitan cities of South Korea during 2014–2018. We found transition metals consistently showed significant associations with all-cause mortality, while the effects of other constituents varied across the cities and for cause of death. Carbonaceous components strongly affected the all-cause, cardiovascular, and respiratory mortality in Daejeon. Secondary inorganic aerosols, SO42− and NH4+, showed significant associations with respiratory mortality in Gwangju. We also found the sources from which species closely linked to mortality generally increased the relative mortality risks. Heavy metal markers from soil or industrial sources were significantly associated with mortality in all cities. However, several sources influenced mortality despite their marker species not being significantly associated with it. Secondary nitrate and secondary sulfate sources were linked to mortality in DJ. This could be attributed to the deep inland location, which might have facilitated formation of secondary inorganic aerosols. In addition, primary sources including mobile and coal combustion seemed to have acute impacts on respiratory mortality in Gwangju. Our findings suggest the necessity of positive matrix factorization (PMF)-based approaches for evaluating health effects of PM2.5 while considering the spatial heterogeneity in the compositions and source contributions of PM2.5.N