Photoluminescence in SPS-processed transparent Ce:YAG ceramics

Ceramic phosphors display great promise for the realization of high-power lighting devices. Cerium-doped yttrium aluminum garnet (Ce:YAG) is commonly used as a phosphor in white light emitting diodes. Therefore, it was chosen as a case study to investigate photoluminescence of transparent ceramic phosphors fabricated by spark plasma sintering (SPS). In the present work, 0.5 at.% Ce:YAG nano-powder was synthesized by a co-precipitation method and subsequently consolidated by SPS into highly transparent ceramic samples. The effect of varying sintering parameters (temperature and pressure) and post-sintering treatments (hot isostatic pressing and air atmosphere thermal treatment) on optical properties was investigated. Correlations between in-line transmittance, photoluminescence (PL) and residual porosity characteristics (pore size and volume fraction) were established. It was also found that PL emission intensity and external quantum efficiency were significantly affected by intentionally created surface roughness. Please click Additional Files below to see the full abstract

Microstructure evolution during high-pressure spark plasma sintering (HPSPS) of transparent alumina

Applying high-pressure during spark plasma sintering (so-called HPSPS) enables rapid densification of a ceramic powder at relatively lower temperatures, limiting grain growth and allowing fabrication of fine-grained highly transparent ceramics. The present work focuses on the fabrication of fine submicron transparent alumina from untreated commercial powder by HPSPS and the microstructure evolution during consolidation under high applied pressure. The sintering was conducted at relatively low temperatures (1000-1100°C) under high pressure varied from 250 to 800 MPa. We review unique sintering phenomena such as stress-enhanced grain growth and de-sintering, which are related to creep taking place during the final stage of pressure-assisted densification. In addition, optical and mechanical properties of obtained samples are discussed. Please click Additional Files below to see the full abstract

Effect of Mn doping on densification and properties of transparent alumina by high- pressure SPS (HPSPS)

Please click Additional Files below to see the full abstract

Fabrication of Polycrystalline Transparent Co+2: MgAl2O4 by a Combination of Spark Plasma Sintering (SPS) and Hot Isostatic Pressing (HIP) Processes

Transparent Co2+ doped MgAl2Ob4 spinel was fabricated by SPS consolidation followed by and HIP treatment. It was established that HIP treatment significantly improved transparency of the ceramic in a wide range of wavelengths, especially, in a range, which is relevant for Q-switching. Nonlinear absorption was demonstrated and the ground and excited state absorption cross sections were estimated. The positive effect of the HIP treatment on the optical properties is related to an elimination of extremely fine porosity and to the location of Co ions at Mg2+sites in the spinel ionic structure. The experimental results indicate that the fabricated specimens can be used as a passive laser Q-switching material

Spark Plasma Sintering Apparatus Used for High-temperature Compressive Creep Tests

Creep is a time dependent, temperature-sensitive mechanical response of a material in the form of continuous deformation under constant load or stress. To study the creep properties of a given material, the load/stress and temperature must be controlled while measuring strain over time. The present study describes how a spark plasma sintering (SPS) apparatus can be used as a precise tool for measuring compressive creep of materials. Several examples for using the SPS apparatus for high-temperature compressive creep studies of metals and ceramics under a constant load are discussed. Experimental results are in a good agreement with data reported in literature, which verifies that the SPS apparatus can serve as a tool for measuring compressive creep strain of materials

Fabrication of Polycrystalline Transparent Co

Transparent Co2+ doped MgAl2Ob4 spinel was fabricated by SPS consolidation followed by and HIP treatment. It was established that HIP treatment significantly improved transparency of the ceramic in a wide range of wavelengths, especially, in a range, which is relevant for Q-switching. Nonlinear absorption was demonstrated and the ground and excited state absorption cross sections were estimated. The positive effect of the HIP treatment on the optical properties is related to an elimination of extremely fine porosity and to the location of Co ions at Mg2+sites in the spinel ionic structure. The experimental results indicate that the fabricated specimens can be used as a passive laser Q-switching material

Creep of Polycrystalline Magnesium Aluminate Spinel Studied by an SPS Apparatus

A spark plasma sintering (SPS) apparatus was used for the first time as an analytical testing tool for studying creep in ceramics at elevated temperatures. Compression creep experiments on a fine-grained (250 nm) polycrystalline magnesium aluminate spinel were successfully performed in the 1100–1200 °C temperature range, under an applied stress of 120–200 MPa. It was found that the stress exponent and activation energy depended on temperature and applied stress, respectively. The deformed samples were characterized by high resolution scanning electron microscope (HRSEM) and high resolution transmission electron microscope (HRTEM). The results indicate that the creep mechanism was related to grain boundary sliding, accommodated by dislocation slip and climb. The experimental results, extrapolated to higher temperatures and lower stresses, were in good agreement with data reported in the literature

Bonding of TRIP-Steel/Al2O3-(3Y)-TZP Composites and (3Y)-TZP Ceramic by a Spark Plasma Sintering (SPS) Apparatus

A combination of the high damage tolerance of TRIP-steel and the extremely low thermal conductivity of partially stabilized zirconia (PSZ) can provide controlled thermal-mechanical properties to sandwich-shaped composite specimens comprising these materials. Sintering the (TRIP-steel-PSZ)/PSZ sandwich in a single step is very difficult due to differences in the sintering temperature and densification kinetics of the composite and the ceramic powders. In the present study, we successfully applied a two-step approach involving separate SPS consolidation of pure (3Y)-TZP and composites containing 20 vol % TRIP-steel, 40 vol % Al2O3 and 40 vol % (3Y)-TZP ceramic phase, and subsequent diffusion joining of both sintered components in an SPS apparatus. The microstructure and properties of the sintered and bonded specimens were characterized. No defects at the interface between the TZP and the composite after joining in the 1050–1150 °C temperature range were observed. Only limited grain growth occurred during joining, while crystallite size, hardness, shear strength and the fraction of the monoclinic phase in the TZP ceramic virtually did not change. The slight increase of the TZP layer’s fracture toughness with the joining temperature was attributed to the effect of grain size on transformation toughening

The Effect of Lithium Doping on the Sintering and Grain Growth of SPS-Processed, Non-Stoichiometric Magnesium Aluminate Spinel

The effects of lithium doping on the sintering and grain growth of non-stoichiometric nano-sized magnesium aluminate spinel were studied using a spark plasma sintering (SPS) apparatus. Li-doped nano-MgO·nAl2O3 spinel (n = 1.06 and 1.21) powders containing 0, 0.20, 0.50 or 1.00 at. % Li were synthesized by the solution combustion method and dense specimens were processed using a SPS apparatus at 1200 °C and under an applied pressure of 150 MPa. The SPS-processed samples showed mutual dependency on the lithium concentration and the alumina-to-magnesia ratio. For example, the density and hardness values of near-stoichiometry samples (n = 1.06) showed an incline up to 0.51 at. % Li, while in the alumina rich samples (n = 1.21), these values remained constant up to 0.53 at. % Li. Studying grain growth revealed that in the Li-MgO·nAl2O3 system, grain growth is limited by Zener pining. The activation energies of undoped, 0.2 and 0.53 at. % Li-MgO·1.21Al2O3 samples were 288 ± 40, 670 ± 45 and 543 ± 40 kJ·mol−1, respectively

Spark plasma sintering of ductile ceramic particles: study of LiF

International audienceDensification of cuboidal micrometer-sized lithium fluoride particles as ductile ceramic by spark plasma sintering (SPS) was investigated. Specimens were fabricated at different pressures and temperature conditions, ranging from 2 to 100 MPa at 500 °C and from 200 to 700 °C under 100 MPa of applied pressure, respectively. Dense specimens of 99 % relative density were fabricated by heating to 500 °C under constant pressure of 100 MPa. The densification showed first compaction by particle rearrangement, followed by plastic deformation via dislocation glide. Hot-pressing models were used to describe the densification by considering the temperature dependences of the yield stress, the strain hardening behavior and coefficients, and the pore size and shape dependences on the applied stress. A good agreement was found between the experimental and the theoretical densification curves. At low pressure of 2 MPa, the densification occurs by particle sliding, assisted by viscous flow at their surfaces, and local plastic deformation at the particle contacts, due to the intensified local stress. Finally, the micrometer-sized structural features and the contiguity achieved by plastic deformation at the start of spark plasma sintering (SPS) nullify any field effects in this model system at higher pressures; good agreement was obtained with expected conventional hot pressing