Strength assessment of stiffened blast walls in offshore installations under explosions

Offshore installations are exposed to hydrocarbon explosions and/or fire accidents. Especially, explosions lead to serious damages to human, safety, and environment. To minimise and prevent the damage from explosions, blast walls are generally installed in oil and gas production structures. Typical blast walls are classified into flat, corrugated, and stiffened types. Among them, corrugated blast walls are frequently used for reasons such as construction, cost, and energy absorption. However, it has been known that a corrugated type of blast wall buckles between the web and flange under the explosion loads, and loses its stiffness. It means that the buckling phenomenon of a blast wall is closely related to the structural strength. This study investigates on the structural characteristics of a blast wall under quasi-static and dynamic (explosion) loads with or without a flat-plated stiffener. Finally, it can be concluded that the flat type of stiffeners are located at the buckling region to delay the buckling and improve the strength of blast walls

The Dropping of In-Medium Hadron Mass in Holographic QCD

We study the baryon density dependence of the vector meson spectrum using the D4/D6 system together with the compact D4 baryon vertex. We find that the vector meson mass decreases almost linearly in density at low density for small quark mass, but saturates to a finite non-zero value for large density. We also compute the density dependence of the $\eta\prime$ mass and the $\eta\prime$ velocity. We find that in medium, our model is consistent with the GMOR relation up to a few times the normal nuclear density. We compare our hQCD predictions with predictions made based on hidden local gauge theory that is constructed to model QCD.Comment: 20 pages, 7 figure

UBR2 of the N-end rule pathway is required for chromosome stability via histone ubiquitylation in spermatocytes and somatic cells

The N-end rule pathway is a proteolytic system in which its recognition components (N-recognins) recognize destabilizing N-terminal residues of short-lived proteins as an essential element of specific degrons, called N-degrons. The RING E3 ligases UBR2 and UBR1 are major N-recognins that share size (200 kDa), conserved domains and substrate specificities to N-degrons. Despite the known function of the N-end rule pathway in degradation of cytosolic proteins, the major phenotype of UBR2-deficient male mice is infertility caused by arrest of spermatocytes at meiotic prophase I. UBR2-deficient spermatocytes are impaired in transcriptional silencing of sex chromosome-linked genes and ubiquitylation of histone H2A. In this study we show that the recruitment of UBR2 to meiotic chromosomes spatiotemporally correlates to the induction of chromatin-associated ubiquitylation, which is significantly impaired in UBR2-deficient spermatocytes. UBR2 functions as a scaffold E3 that promotes HR6B/UbcH2-dependent ubiquitylation of H2A and H2B but not H3 and H4, through a mechanism distinct from typical polyubiquitylation. The E3 activity of UBR2 in histone ubiquitylation is allosterically activated by dipeptides bearing destabilizing N-terminal residues. Insufficient monoubiquitylation and polyubiquitylation on UBR2-deficient meiotic chromosomes correlate to defects in double strand break (DSB) repair and other meiotic processes, resulting in pachytene arrest at stage IV and apoptosis. Some of these functions of UBR2 are observed in somatic cells, in which UBR2 is a chromatin-binding protein involved in chromatin-associated ubiquitylation upon DNA damage. UBR2-deficient somatic cells show an array of chromosomal abnormalities, including hyperproliferation, chromosome instability, and hypersensitivity to DNA damage-inducing reagents. UBR2-deficient mice enriched in C57 background die upon birth with defects in lung expansion and neural development. Thus, UBR2, known as the recognition component of a major cellular proteolytic system, is associated with chromatin and controls chromatin dynamics and gene expression in both germ cells and somatic cells. © 2012 Kwon et al

Chiral Condensate in Holographic QCD with Baryon Density

We consider the chiral condensate in the baryonic dense medium using the generalized Sakai-Sugimoto model. It is defined as the vacuum expectation value of open Wilson line that is proposed to be calculated by use of the area of world-sheet instanton. We evaluate it in confined as well as deconfined phase. In both phases, the chiral condensate has a minimum as a function of baryon density. In the deconfined phase, taking into account the chiral symmetry restoration, we classify the behavior of chiral condensate into three types. One can set the parameter of the theory such that the results, in low but sufficiently higher density, is in agreement with the expectation from QCD.Comment: 23 pages, 8 figure

Chemical ordering in PtNi nanocrystals

We investigated the chemical ordering in PtNi nanocrystals fabricated on sapphire substrate using in-situ synchrotron X-ray scattering. Nanocrystals with composition close to 1:1 were ordered in the tetragonal L1(0) structure at low temperatures. The transition to disordered FCC structure occurred at around 640 degrees C and substantial hysteresis of about 50 K was observed. Nanocrystals of smaller sizes fabricated under the same conditions were Ni rich and ordered into Cu3Au type L1(2) structure. Significantly higher degree of chemical ordering was observed in L1(2) structure than in L1(0) structure. (C) 2016 Elsevier B.V. All rights reserved.1144Ysciescopu

Transparent and flexible polymerized graphite oxide thin film with frequency-dependent dielectric constant

Here we report on the preparation of transparent and flexible polymerized graphite oxide, which is composed of carbons with sp3-hybridized orbitals and a non-planar ring structure, and which demonstrates dispersion in its dielectric constant at room temperature. This frequency dependence renders the material suitable for creating miniaturized, flexible, and transparent variable capacitors, allowing for smaller and simpler integrated electronic devices. We discuss this polarizability in terms of space charge effects

The Baryonic Phase in Holographic Descriptions of the QCD Phase Diagram

We study holographic models of the QCD temperature-chemical potential phase diagram based on the D3/D7 system with chiral symmetry breaking. The baryonic phase may be included through linked D5-D7 systems. In a previous analysis of a model with a running gauge coupling a baryonic phase was shown to exist to arbitrarily large chemical potential. Here we explore this phase in a more generic phenomenological setting with a step function dilaton profile. The change in dilaton generates a linear confining $\bar{q}q$ potential and opposes the screening effect of temperature. We show that the persistence of the baryonic phase depends on the step size and that QCD-like phase diagrams can be described. The baryonic phase's existence is qualitatively linked to the existence of confinement in Wilson loop computations in the background.Comment: 21 pages, 7 figure

Superconductivity below 20 K in heavily electron-doped surface layer of FeSe bulk crystal

A superconducting transition temperature (T-c) as high as 100 K was recently discovered in one monolayer FeSe grown on SrTiO3. The discovery ignited efforts to identify the mechanism for the markedly enhanced T-c from its bulk value of 8 K. There are two main views about the origin of the T-c enhancement: interfacial effects and/or excess electrons with strong electron correlation. Here, we report the observation of superconductivity below 20 K in surface electron-doped bulk FeSe. The doped surface layer possesses all the key spectroscopic aspects of the monolayer FeSe on SrTiO3. Without interfacial effects, the surface layer state has a moderate T-c of 20 K with a smaller gap opening of 4.2 meV. Our results show that excess electrons with strong correlation cannot induce the maximum T-c, which in turn reveals the need for interfacial effects to achieve the highest T-c in one monolayer FeSe on SrTiO3.1116Ysciescopu

Holographic Hadrons in a Confining Finite Density Medium

We study a sector of the hadron spectrum in the presence of finite baryon density. We use a non-supersymmetric gravity dual to a confining guage theory which exhibits a running dilaton. The interaction of mesons with the finite density medium is encoded in the dual theory by a force balancing between flavor D7-branes and a baryon vertex provided by a wrapped D5-brane. When the current quark mass m_q is sufficiently large, the meson mass reduces, exhibiting an interesting spectral flow as we increase the baryon density while it has a more complicated behaviour for very small m_q.Comment: 34 pages, 20 figures, errors for some figures are fixe

Evolving Robots on Easy Mode: Towards a Variable Complexity Controller for Quadrupeds

The complexity of a legged robot's environment or task can inform how specialised its gait must be to ensure success. Evolving specialised robotic gaits demands many evaluations - acceptable for computer simulations, but not for physical robots. For some tasks, a more general gait, with lower optimization costs, could be satisfactory. In this paper, we introduce a new type of gait controller where complexity can be set by a single parameter, using a dynamic genotype-phenotype mapping. Low controller complexity leads to conservative gaits, while higher complexity allows more sophistication and high performance for demanding tasks, at the cost of optimization effort. We investigate the new controller on a virtual robot in simulations and do preliminary testing on a real-world robot. We show that having variable complexity allows us to adapt to different optimization budgets. With a high evaluation budget in simulation, a complex controller performs best. Moreover, real-world evolution with a limited evaluation budget indicates that a lower gait complexity is preferable for a relatively simple environment.Comment: Accepted to EvoApplications1