290 research outputs found
Electrical and structural characterisation of plasma-polymerized TEOS thin films as humidity sensors
In this study, we used plasma polymerization of TEOS to deposit thin water molecule sensitive layers on two intredigitated aluminum electrodes evaporated on glass substrate. Electrical and structural analyses of the deposited sensitive layers have been evaluated through current-impedance responses and FTIR spectroscopy. The elaborated humidity resistive sensor exhibited a detectable response to relative humidity (RH) percentages ranging from 20 to 95%. The films showed good sensitivity to water molecule due to the presence of hydroxyl groups OH. These groups provide the adsorption sites for water and play an important role to the humidity sensor properties. The low impedance, good sensitivity as characterized by a linear change in impedance from 106 to 103 Ω over RH interval of 20–80% and low observed hysteresis of about 4%, make the elaborated layer a promising candidate for humidity sensors development.In this study, we used plasma polymerization of TEOS to deposit thin water molecule sensitive layers on two intredigitated aluminum electrodes evaporated on glass substrate. Electrical and structural analyses of the deposited sensitive layers have been evaluated through current-impedance responses and FTIR spectroscopy. The elaborated humidity resistive sensor exhibited a detectable response to relative humidity (RH) percentages ranging from 20 to 95%. The films showed good sensitivity to water molecule due to the presence of hydroxyl groups OH. These groups provide the adsorption sites for water and play an important role to the humidity sensor properties. The low impedance, good sensitivity as characterized by a linear change in impedance from 106 to 103 Ω over RH interval of 20–80% and low observed hysteresis of about 4%, make the elaborated layer a promising candidate for humidity sensors development
Variable cavity volume tooling for high-performance resin infusion moulding
This article describes the research carried out by Warwick under the BAE Systems/EPSRC programme ‘Flapless Aerial Vehicles Integrated Interdisciplinary Research – FLAVIIR’. Warwick's aim in FLAVIIR was to develop low-cost innovative tooling technologies to enable the affordable manufacture of complex composite aerospace structures and to help realize the aim of the Grand Challenge of maintenance-free, low-cost unmanned aerial vehicle manufacture. This article focuses on the evaluation of a novel tooling process (variable cavity tooling) to enable the complete infusion of resin throughout non-crimp fabric within a mould cavity under low (0.1 MPa) injection pressure. The contribution of the primary processing parameters to the mechanical properties of a carbon composite component (bulk-head lug section), and the interactions between parameters, was determined. The initial mould gap (di) was identified as having the most significant effect on all measured mechanical properties, but complex interactions between di, n (number of fabric layers), and vc (mould closure rate) were observed. The process capability was low due to the manual processing, but was improved through process optimization, and delivered properties comparable to high-pressure resin transfer moulding
On Chern-Simons Quivers and Toric Geometry
We discuss a class of 3-dimensional N=4 Chern-Simons (CS) quiver gauge models
obtained from M-theory compactifications on singular complex 4-dimensional
hyper-Kahler (HK) manifolds, which are realized explicitly as a cotangent
bundle over two-Fano toric varieties V^2. The corresponding CS gauge models are
encoded in quivers similar to toric diagrams of V^2. Using toric geometry, it
is shown that the constraints on CS levels can be related to toric equations
determining V^2.Comment: 14pg, 1 Figure, late
First Measurements of Electron Temperature Fluctuations by Correlation ECE on Tore Supra
Electron temperature fluctuation studies can help to understand the nature of
the turbulent transport in to-kamak plasmas. At Tore Supra, a 32-channel
heterodyne ECE radiometer has been upgraded with two chan-nels of 100 MHz
bandwidth and tunable central frequencies allowing the shift of the plasma
sample volume in the radial direction. With the sufficiently large video
bandwidth and the long sampling time, it is possible to reduce significantly
the thermal noise and to identify "true" high frequency components up to 200
kHz from the cross-correlation between these channels. First results of
temperature fluctuation measurements on Tore Supra are reported in this paper.Comment: 12th International Congress on Plasma Physics, 25-29 October 2004,
Nice (France
Is there an orthographic boost for ambiguous words during their processing?
The present study explores the issue of why ambiguous words are recognized faster than unambiguous ones during word recognition. To this end we contrasted two different hypotheses: the semantic feedback hypothesis (Hino and Lupker in J Exp Psychol Hum Percept Perform 22:1331-1356, 1996. https://doi.org/10.1037/0096-1523.22.6.1331 ), and the hypothesis proposed by Borowsky and Masson (J Exp Psychol Learn Mem Cognit 22:63-85, 1996. https://doi.org/10.1037/0278-7393.22.1.63 ). Although both hypotheses agree that ambiguous words benefit during recognition in that they engage more semantic activation, they disagree as to whether or not this greater semantic activation feeds back to the orthographic level, hence speeding up the orthographic coding of ambiguous words. Participants were presented with ambiguous and unambiguous words in two tasks, a lexical decision task (LDT) and a two-alternative forced-choice task (2AFC). We found differences between ambiguous and unambiguous words in both the LDT and the 2AFC tasks. These results suggest that the orthographic coding of ambiguous words is boosted during word processing. This finding lends support to the semantic feedback hypothesis.This research was funded by the Spanish Ministry of Economy and Competitiveness (PSI2015-63525-P) and by the Research Promotion Program of the Universitat Rovira i Virgili (2016PFR-URV-B2-37). This has also been partially supported by the FCT (Foundation for Science and Technology) through the state budget with Reference IF/00784/2013/CP1158/CT0013. The first author also holds a grant from the Universitat Rovira i Virgili (2015PMF-PIPF-16)
- …