Wake control of a 3D bluff body

Bluff bodies are characterized by massive flow separation responsible of most of the pressure drag. Three main contributions roughly determine the total amount of the body drag : 30% is due to the rolling tire, 45% derive from the rear base and 25% comes from the underbody flow and interferences. In the case of large and medium size trucks employed for short and long distance of transportations the fuel consumption can be considerable reduced through the control of the flow separation from the base. The afterbody geometry plays a key role for the drag contributions as showed by Ahmed [1]. Aider et al. [2] used passive vortex generators while piezoelectric vortex generators were investigated by Orazi et al. [3]. Continuous blowing slots as done by Rouméas et al. [4] have been also used on a semi-infinite body. The present investigation considers a simplified 3D car with square-back rear shape. The wake control consist in the injection of continuous jets through four rectangular slots mounted around the perimeter of the rear part. Furthermore, four curved slots are disposed near the wheel to control the flow separation in this region. The flow analysis is performed by means of CFD commercial code (STAR CCM+® by Cd-Adapco). Results of this preliminary investigation will be presented. The effects of the independent rear slots orientation (i) and of the jet velocity (Vi) are analyzed as well as the effects of the jets around the wheels. The study will be also carry out on a physical model that will be tested in a wind tunnel. In figure 1 the expanded model and a portion of the longitudinal section of the rear part of the body are shown

Trapped vortex cell for aeronautical applications: flow analysis through PIV and Wavelet transform tools

Results of the application of a trapped vortex cell to an airfoil with the aim of improving the aerodynamic performances are presented for two complementary experiments arranged at CIRA and at Politecnico di Torino. In the CIRA experiments, PIV measurements on a simplified configuration were carried out to characterize the trapped vortical structure and its effect on the separating flow downstream of the cell. In the experimental investigation at Politecnico di Torino, static pressure distributions were measured around a complete airfoil model, to yield lift and pitching moment coefficients. Wake surveys were also carried out to measure the drag. To study the unsteady phenomena inside the cavity pressure fluctuations signals were also investigated using Kulite sensors. In both experiments, the angle of attack of the airfoil and the Reynolds number were varied. It is shown that the flow inside the cell is highly unsteady with significant shedding of flow structures downstream. This phenomenon results in a large region of separated flow, in higher drag and lower lift. By contrast, the cell flow is considerably stabilized and regularized by applying distributed suction over the cell wall. As a result, the flow downstream of the cell reattaches and lower drag and larger lift are observed

Trapped vortex cell for aeronautical applications: flow analysis through PIV and Wavelet transform tools.

Abstract Results of the application of a trapped vortex cell to an airfoil with the aim of improving the aerodynamic performances are presented for two complementary experiments arranged at CIRA and at Politecnico di Torino. In the CIRA experiments, PIV measurements on a simplified configuration were carried out to characterize the trapped vortical structure and its effect on the separating flow downstream of the cell. In the experimental investigation at Politecnico di Torino, static pressure distributions were measured around a complete airfoil model, to yield lift and pitching moment coefficients. Wake surveys were also carried out to measure the drag. To study the unsteady phenomena inside the cavity pressure fluctuations signals were also investigated using Kulite sensors. In both experiments, the angle of attack of the airfoil and the Reynolds number were varied. It is shown that the flow inside the cell is highly unsteady with significant shedding of flow structures downstream. This phenomenon results in a large region of separated flow, in higher drag and lower lift. By contrast, the cell flow is considerably stabilized and regularized by applying distributed suction over the cell wall. As a result, the flow downstream of the cell reattaches and lower drag and larger lift are observed

From mining wastes to mineral sources - investigating the REE-bearing occurrences in the Arburèse District (SW Sardinia)

In recent years, the search for possible sources of REE minerals in Europe involved numerous old mine areas with high volumes of mining wastes that may offer significant amounts of Critical Raw Materials (CRMs). In some cases, strong evidence of CRMs anomalous concentrations arises from environmental characterization of wastes, so that an interesting problem is that of finding their sources, i.e., the original CRMs - rich mineral phases in the residual ore. An excellent example is provided by the Arburèse district of SW Sardinia, for about 150 years a major Pb-Zn source in Italy, now an area under study for remediation of its severe environmental problems, including >10 Mt of waste deposits. The district exploited a large system (>10 km) of low-temperature polymetallic veins hosted in Lower Paleozoic siliciclastic rocks belonging to the Variscan Nappe zone, arranged in two main geometrical trends relative to the late Variscan Arbus pluton: “peripheral” and “intersecting”. Recent investigations in the Montevecchio mine area discovered high Zn (up to 2.65 wt.%) and Pb (1.23 wt.%) grades in stratified tailing materials belonging to the Sanna old processing plant. Remarkably, ICP-MS analyses on the same materials revealed total REE+ Y contents attaining about 600 ppm. XRD studies confirmed a tailing composition essentially made of gangue minerals (quartz, siderite and micas) with goethite, baryte and traces of Zn carbonates and Pb sulfates. Chondrite-normalized REE patterns are coherent with the hydrothermal character of the source: however, both the REE mineralogical host(s) in tailings and in the Montevecchio ore are still undetermined. In the search of REE-bearing phases in the ores, some relevant insights are provided by studies on the southern branch of the Arburèse system, where the veins of “peripheral” system are hosted in late Ordovician-Silurian sedimentary sequences. In this part of the district the polymetallic veins assume the character of five-elements (Ni-Co-As-Bi-Ag) veins, with a rich Ni-Co-Fe arsenide – quartz association (1) overprinted by a Zn-Pb-Cu sulfide – siderite – quartz association (2), very similar to that dominating in Montevecchio. Investigations in the Pira Inferida mine sector highlighted the presence of LREE fluorocarbonates (synchysite-Ce and bastnaesite-Ce) and phosphates (monazite) associated with rutile and apatite. LREE minerals have been detected by SEM-EDS as tiny crystals in the quartz-sericitic gangue of the Montevecchio-type (2) mineral association. The same minerals are found in millimetric aggregates in the oxide zone of the veins, sporadically reported by mineral collectors in other mine sites of the same system. Overall, these occurrences, similar to those found in other low-temperature vein systems of Sardinia (e.g., Silius vein system), appear reliable mineral REE sources for Montevecchio mine wastes; they may be therefore used as proxies for REE exploration and assessment in the district

FOOD SAFETY AND PROCESS HYGIENE CRITERIONS ON SHEEP CARCASSES

The hygienic status and the presence of some pathogens (Staphylococcus aureus, Listeria monocytogenes e Salmonella spp.) at slaughterhouses was evaluated in different matrix of sheep and lambs (carcass surface, faeces, fleeces and mesenteric lymph nodes) according to the Com. Reg. (EC) No 2073/2005. The 48% of sheep and 68.9% of lamb sampled carcasses resulted allocated into the marginal category for Aerobic colony count, while the 28% and 42.2% respectively were allocated into unacceptable category for Enterobacteriaceae. S.aureus was isolated more frequently in fleeces (11.5%), carcasses (12.6%) of lambs than sheep. L. monocytogenes was found in fleeces and carcass of two sheep and in faeces of four lambs, while Salmonella spp. was detected only in sheep carcasses of a single plant

Reciprocal regulation between Smad7 and Sirt1 in the gut

In inflammatory bowel disease (IBD) mucosa, there is over-expression of Smad7, an intracellular inhibitor of the suppressive cytokine transforming growth factor-β1, due to post-transcriptional mechanisms that enhance Smad7 acetylation status thus preventing ubiquitination-mediated proteosomal degradation of the protein. IBD-related inflammation is also marked by defective expression of Sirt1, a class III NAD+-dependent deacetylase, which promotes ubiquitination-mediated proteosomal degradation of various intracellular proteins and triggers anti-inflammatory signals. The aim of our study was to determine whether, in IBD, there is a reciprocal regulation between Smad7 and Sirt1. Smad7 and Sirt1 were examined in mucosal samples of IBD patients and normal controls by Western blotting and immunohistochemistry, and Sirt1 activity was assessed by a fluorimetric assay. To determine whether Smad7 is regulated by Sirt1, normal or IBD lamina propria mononuclear cells (LPMC) were cultured with either Sirt1 inhibitor (Ex527) or activator (Cay10591), respectively. To determine whether Smad7 controls Sirt1 expression, ex vivo organ cultures of IBD mucosal explants were treated with Smad7 sense or antisense oligonucleotide. Moreover, Sirt1 expression was evaluated in LPMC isolated from Smad7-transgenic mice given dextran sulfate sodium (DSS). Upregulation of Smad7 was seen in both the epithelial and lamina propria compartments of IBD patients and this associated with reduced expression and activity of Sirt1. Activation of Sirt1 in IBD LPMC with Cay10591 reduced acetylation and enhanced ubiquitination-driven proteasomal-mediated degradation of Smad7, while inhibition of Sirt1 activation in normal LPMC with Ex527 increased Smad7 expression. Knockdown of Smad7 in IBD mucosal explants enhanced Sirt1 expression, thus suggesting a negative effect of Smad7 on Sirt1 induction. Consistently, mucosal T cells of Smad7-transgenic mice contained reduced levels of Sirt1, a defect that was amplified by induction of DSS colitis. The data suggest the existence of a reciprocal regulatory mechanism between Smad7 and Sirt1, which could contribute to amplify inflammatory signals in the gut

Ambiguous emotion recognition in temporal lobe epilepsy: The role of expression intensity

The lateralization of emotion processing is currently debated and may be further explored by examining facial expression recognition (FER) impairments in temporal lobe epilepsy (TLE). Furthermore, there is also debate in the literature whether FER deficits in individuals with TLE are more pronounced in the right than in the left hemisphere. Individuals with TLE were tested with an FER task designed to be more sensitive than those classically used to shed light on this issue. A total of 25 right- and 32 left-TLE patients, candidates for surgery, along with controls, underwent an FER task composed of stimuli shown not only at full-blown intensities (100 %), but also morphed to lower-intensity display levels (35 %, 50 %, and 75 %). The results showed that, as compared to controls, right-TLE patients showed deficits in the recognition of all emotional categories. Furthermore, when considering valence, right-TLE patients were impaired only in negative emotion recognition, but no deficits for positive emotions were highlighted in left-TLE patients. Finally, only the right-TLE patients’ impairment was found to be related to the age of epilepsy onset. Our work demonstrates that the FER deficits in TLE span multiple emotional categories and show manifestations dependent on the laterality of the epileptic focus. Taken together, our findings provide the strongest evidence for the right-hemisphere model, but they also partially support the valence model. We suggest that current models are not exhaustive at explaining emotional-processing cerebral control, and further that multistep models should be developed