Iridium wire grid polarizer fabricated using atomic layer deposition

In this work, an effective multistep process toward fabrication of an iridium wire grid polarizer for UV applications involving a frequency doubling process based on ultrafast electron beam lithography and atomic layer deposition is presented. The choice of iridium as grating material is based on its good optical properties and a superior oxidation resistance. Furthermore, atomic layer deposition of iridium allows a precise adjustment of the structural parameters of the grating much better than other deposition techniques like sputtering for example. At the target wavelength of 250 nm, a transmission of about 45% and an extinction ratio of 87 are achieved

Single-photon Transistors Based on the Interaction of an Emitter and Surface Plasmons

A symmetrical approach is suggested (Chang DE et al. Nat Phys 3:807, 2007) to realize a single-photon transistor, where the presence (or absence) of a single incident photon in a ‘gate’ field is sufficient to allow (prevent) the propagation of a subsequent ‘signal’ photon along the nanowire, on condition that the ‘gate’ field is symmetrically incident from both sides of an emitter simultaneously. We present a scheme for single-photon transistors based on the strong emitter-surface-plasmon interaction. In this scheme, coherent absorption of an incoming ‘gate’ photon incident along a nanotip by an emitter located near the tip of the nanotip results in a state flip in the emitter, which controls the subsequent propagation of a ‘signal’ photon in a nanowire perpendicular to the axis of the nanotip

Up scalable ITO free organic light emitting diodes based on embedded inkjet printed copper grids

We report on ITO-free OLEDS with a transparent hybrid Cu nanoparticle grid/PEDOT:PSS electrode processed in ambient conditions. An experimentally based methodology was implemented, where studies on alternative PEDOT:PSS derivatives and Cu grid design were performed, to gradually increase the efficiency of lab scale ITO-free OLEDs. To further increase electrode performance, inkjet-printed (IJP) Cu-grids are embedded to flatten the electrode, reduce leakage current and enhance homogeneity and efficiency. Finally, embedded Cu based ITO-free OLEDs showed current and power efficiencies comparable to reference ITO-based OLEDs. Methods to manufacture large area flat embedded IJP Cu-electrodes on glass and flexible substrates are presented and upscaling prospects of the proposed ITO-free electrode are discussed

Photocatalytic Degradation of Organic Pollutants in Water Using Graphene Oxide Composite

Developing sustainable and less-expensive technique is always challenging task in water treatment process. This chapter explores the recent development of photocatalysis technique in organic pollutant removal from the water. Particularly, advantages of graphene oxide in promoting the catalytic performance of semiconductor, metal nanoparticle and polymer based photocatalyst materials. Owing to high internal surface area and rapid electron conducting property of graphene oxide fostering as backbone scaffold for effective hetero-photocatalyst loading, and rapid photo-charge separation enables effective degradation of pollutant. This chapter summaries the recent development of graphene oxide composite (metal oxide, metal nanoparticle, metal chalcogenides, and polymers) in semiconductor photocatalysis process towards environmental remediation application

Plasmon polaritons of metallic nanowires for controlling submicron propagation of light

Abstract: The optical resonances of individual plasmonic dimer antennas are investigated using confocal darkfield spectroscopy. Experiments on an array of antennas with varying arm lengths and interparticle gap sizes show large spectral shifts of the plasmon modes due to a combination of geometrical resonances and plasmon hybridization. The resonances of the coupled-dimer antennas are considerably broadened compared to those of single nanorods, which is attributed to a superradiant damping of the coupled antenna modes. The scattering spectra are compared with electrodynamic model calculations that demonstrate both the near-field and far-field characteristics of a half-wave antenna

Plasmon Dispersion Relation Of Au And Ag Nanowires

We have studied surface plasmon modes on silver and gold nanowires of a fixed cross section and different lengths, produced by electron beam lithography. The optically excited modes are determined by extinction spectroscopy and can be interpreted in terms of standing plasmon polariton waves. The eigenfrequencies are found to follow a dispersion relation similar to that for a planar metal/dielectric interface. © 2003 The American Physical Society

Plasmon Dispersion Relation Of Au And Ag Nanowires

We have studied surface plasmon modes on silver and gold nanowires of a fixed cross section and different lengths, produced by electron beam lithography. The optically excited modes are determined by extinction spectroscopy and can be interpreted in terms of standing plasmon polariton waves. The eigenfrequencies are found to follow a dispersion relation similar to that for a planar metal/dielectric interface

Optical Resonances In Periodic Surface Arrays Of Metallic Patches

The transmission of light along the surface normal through an air–quartz-glass interface covered with a periodic array of thin, rectangular gold patches has been studied over the visible to infrared range. The various structures that are observed can be qualitatively understood as arising from standing-wave resonances set by the size and surroundings of the metal patches. A method-of-moments calculational scheme provides simulations in good quantitative agreement with the data. It is shown how the standing-wave picture provides a useful conceptual framework to understand and exploit such systems. © 2003 Optical Society of America