A green method to prepare nanosilica modified graphene oxide to inhibit nanoparticles re-aggregation during melt processing

A graphene oxide-silica nanohybrid (GOS), self-assembled into a lasagna-like structure, was prepared in water and used as a filler for the melt preparation of polyamide 6 (PA6)-based nanocomposites. For sake of comparison, PA6-based materials were prepared under the same processing conditions by adding GO only or a physical mixture of GO and silica (GO+S). All the materials were characterized from a morphological, spectroscopic, thermal, dynamic-mechanical (DMA) and mechanical point of view. For all the nanocomposites, the interphase was studied either by analyzing loss factor plots coming from DMA measurements and by implementing a novel approach, i.e. combining solvent extraction, SEM and EDX measurements. While GO and GO+S showed an almost negligible effect on the macroscopic features of PA6, due to lack of dispersion, PA6-GOS ternary nanocomposites displayed an outstanding enhancement of mechanical and thermo-mechanical performance. This feature is likely due to the formation of an extended and strong interphase. In fact, the silica layers intercalated between GO lamellae played as an exfoliating agent, thus proving to be particularly efficient in avoiding self-aggregation of GO sheets, while those covalently attached to basal planes of GO acted as a rivet, capable to interlock the surrounding polymer chains. Finally, with respect to other techniques commonly adopted for the fabrication of polymer-graphene nanocomposites, the green route herein proposed does not involve any toxic solvent nor time-consuming protocols, and allows achieving remarkable improvements in stiffening (up to +180%), strengthening (up to +210%) and toughening (up to +210%) at extremely low filler contents (0.25% or 0.5%)

High performance PA6/CNTs nanohybrid fibers prepared in the melt

Commercial and home-made carbon nanotubes (CNTs) were plasma treated under oxygen atmosphere and then added to polyamide 6 (PA6) in order to prepare fibres by melt spinning. For comparison, pristine nanofillers were used too. The effect of functionalization and of filler characteristics on the morphological, rheological, mechanical and electrical properties of the fibres was studied by TEM and SEM, rheological measurements, tensile and electrical conductivity tests. The results demonstrated that the functionalization led to a better mechanical performance and the morphological analysis confirmed that the adhesion, the dispersion and the alignment of the nanotubes within the polymer matrix were improved when using functionalized CNTs. Electrical tests marked that functionalization slightly reduced the conductivity of the materials

Green Composites Based on Hedysarum coronarium with Outstanding FDM Printability and Mechanical Performance

The addition of natural scraps to biodegradable polymers has gained particular interest in recent years, allowing reducing environmental pollution related to traditional plastic. In this work, new composites were fabricated by adding 10% or 20% of Hedysarum coronarium (HC) flour to Poly (lactic acid) (PLA). The two formulations were first produced by twin screw extrusion and the obtained filaments were then employed for the fabrication of composites, either for compression molding (CM) or by fused deposition modeling (FDM), and characterized from a morphological and mechanical point of view. Through FDM it was possible to achieve dense structures with good wettability of the filler that, on the contrary, cannot be obtained by CM. The results indicate that the filler effectively acts as reinforcement, especially for FDM composites. The most remarkable enhancement was found in the flexural properties (+100% of modulus and ultimate strength), followed by tensile resistance and stiffness (+60%) and impact strength (+50%), whereas a moderate loss in tensile deformability was observed, especially at the highest loading. By adding HC to the polymeric matrix, it was possible to obtain a green, high-performance, and cost-effective composite, which could find applications for the fabrication of panels for furniture or the automotive industry

Blue biotechnology: oil bioremediation using hydrocarbon-degrading bacteria immobilized on biodegradable membranes

A novel bioremediation system to clean up oil contaminated water was developed combining hydrocarbon (HC) degrading bacteria immobilized and polylactic acid (PLA) or polycaprolactone (PCL) membranes prepared by electrospinning. The bioremediation efficiency was tested on crude oil using highly performant HC degrading bacterial strains isolated from marine and soil environments. The membrane morphology, the microbial adhesion and proliferation were evaluated using scanning electron microscopy (SEM). The SEM analysis highlighted that the fibers of the electrospun mats were in nanoscale with a similar diameter size distribution. The electrospun membranes exhibited high oil absorption capacity (q): approximately q = 40 g/g for PLA and q = 20 g/g for PCL. The bacterial strains were able to attach to the PLA and PCL membranes after 48h, reaching high proliferation and biofilm formation within the whole structure in 5 days. The biodegradation efficiency of the bacteria-membrane systems was tested by GC-FID analysis and compared with planktonic cells after 5 and 10 days incubation. The bacterial immobilization is a promoting factor for biodegradation and a new tool to be developed for bioremediation of aquatic systems

Recent Developments and Formulations for Hydrophobic Modification of Carrageenan Bionanocomposites

Versatility of the anionic algal polysaccharide carrageenan has long been discussed and explored, especially for their affinity towards water molecules. While this feature is advantageous in certain applications such as water remediation, wound healing, etc., the usefulness of this biopolymer is extremely limited when it comes to applications such as food packaging. Scientists around the globe are carrying out research works on venturing diverse methods to integrate hydrophobic nature into these polysaccharides without compromising their other functionalities. Considering these foregoing studies, this review is designed to have an in-depth understanding of diverse methods and techniques adopted for tuning the hydrophobic nature of carrageenan-based bionanocomposites, both via surface alterations or by changes made to their chemical structure and attached functional groups. This review article mainly focuses on how the hydrophobicity of carrageenan bionanocomposites varies as a function of the type and refinement of carrageenan, and with the incorporation of additives including plasticisers, nanofillers, bioactive agents, etc. Incorporation of nanofillers such as polysaccharide-based nanoparticles, nanoclays, bioceramic and mineral based nanoparticles, carbon dots and nanotubes, metal oxide nanoparticles, etc., along with their synergistic effects in hybrid bionanocomposites are also dealt with in this comprehensive review article

A new route for the preparation of flexible skin\u2013core poly(ethylene-co-acrylic acid)/polyaniline functional hybrids

Surface modification of polymeric films is a way to obtain final products with high performance for many specific and ad hoc tailored applications, e.g. in functional packaging, tissue engineering or (bio)sensing. The present work reports, for the first time, on the design and development of surface modified ethylene\u2013 acrylic acid copolymer (EAA) films with polyaniline (PANI), with the aim of inducing electrical conductivity and potentially enable the electronic control of a range of physical and chemical properties of the film surface, via a new \u2018\u2018grafting from\u2019\u2019 approach. In particular, we demonstrate that PANI was successfully polymerized and covalently grafted onto flexible EAA substrates, previously activated. The final hybrid materials and the corresponding intermediates were fully characterized via FTIR, XPS, SEM\u2013EDAX, mechanical and electrical tests. The mechanical properties of the films are not detrimentally affected by each treatment step, while a significant increase in electrical conductivity was achieved for the new hybrid materials

Blue biotechnology: enhancement of bioremediation using bacterial biofilms on biodegradable scaffolds

Petroleum hydrocarbons are still the most threatening environmental pollutants. A promising non invasive and low-cost technology for the treatment of contaminated sites is based on bioremediation by biodegrading microorganism endowed with catabolic ability towards oil and derivatives. New methods are needed to enhance and optimize natural biodegradation, such as the immobilization of hydrocarbons degraders in many types of supports. We developed a scaffold-bacteria bioremediation system to clean up oil contamination based on degradable 3D scaffolds. The polycaprolactone component is biodegradable, produced in the melt, i.e. at low cost and without the use of toxic solvents. The biofilm is made of highly performing HC-degrading bacteria such as the marine hydrocarbonoclastic bacteria (HCB) (1) or solid n-alkane degrading Actinobacteria (2, 3). The bacterial biofilm is observed within the whole structure of scaffold using scanning electron microscopy. The bioremediation efficiency of such systems was tested on crude oil by GC-FID analysis and compared whit planktonic cells. The biofilms formation was a promoting factor for biodegradation showing hydrocarbon removal up to 70% and 15% more in respect to the planktonic cells. Increasing availability of the contaminants and a better interaction between the hydrophobic substrate and the bacterial cells resulted in developing the degradation rate. Biofilm-mediated bioremediation is a new tool to be developed for bioremediation of acquatic system

Green composites based on pla and agricultural or marine waste prepared by fdm

Three dimensional-printability of green composites is recently growing in importance and interest, especially in the view of feasibility to valorize agricultural and marine waste to attain green fillers capable of reducing bioplastic costs, without compromising their processability and performance from an environmental and mechanical standpoint. In this work, two lignocellulosic fillers, obtained from Opuntia ficus indica and Posidonia oceanica, were added to PLA and processed by FDM. Among the 3D printed biocomposites investigated, slight differences could be found in terms of PLA molecular weight and filler aspect ratio. It was shown that it is possible to replace up to 20% of bioplastic with low cost and ecofriendly natural fillers, without significantly modifying the processability and the mechanical performance of the neat matrix; at the same time, an increase of surface hydrophilicity was found, with possible positive influence on the biodegradability of such materials after disposal