Light neutral meson production in the era of precision physics at the LHC

The production of light neutral mesons in different collision systems is interesting for a variety of reasons: In nucleus-nucleus (AA) collisions the measurements provide important information on the energy loss of partons traversing the Quark-Gluon Plasma (QGP) which is formed in heavy-ion collisions at the LHC. In proton--proton (pp) collisions, neutral mesons allow us to test with high precision the predictions of perturbative QCD and other model calculations, and also serve as a reference for pA and AA collisions. In pA collisions, cold nuclear matter effects are studied. In the ALICE experiment, which is dedicated to the study of the QGP, neutral mesons can be detected via their decay to two photons. The latter can be reconstructed using the two calorimeters EMCal and PHOS or via conversions in the detector material. Combining state-of-the-art reconstruction techniques with the large data sample delivered by the LHC in Run 2 gives us the opportunity to enhance the precision of our measurements. In these proceedings, an overview of neutral meson production in pp, p--Pb and Pb--Pb collisions at LHC energies, as measured with the ALICE detector is presented.Comment: arXiv admin note: text overlap with arXiv:2008.0203

Light neutral meson production in heavy ion collisions with ALICE in the era of precision physics at the LHC

The production of light neutral mesons in AA collisions probes the physics of the Quark-Gluon Plasma (QGP), which is formed in heavy-ion collisions at the LHC. More specifically, the centrality dependent neutral meson spectra in AA collisions compared to its spectra in minimum-bias pp collisions, scaled with the number of hard collisions, provides information on the energy loss of partons traversing the QGP. The measurement allows to test with high precision the predictions of theoretical model calculations. In addition, the decay of the $\pi^{0}$ and $\eta$ mesons are the dominant backgrounds for all direct photon measurements. Therefore, pushing the limits of the precision of neutral meson production is key to learning about the temperature and space-time evolution of the QGP. In the ALICE experiment neutral mesons can be detected via their decay into two photons. The latter can be reconstructed using the two calorimeters EMCal and PHOS or via conversions in the detector material. The excellent momentum resolution of the conversion photons down to very low $p_{\mathrm{T}}$ and the high reconstruction efficiency and triggering capability of calorimeters at high $p_{\mathrm{T}}$, allow us to measure the $p_{\mathrm{T}}$ dependent invariant yield of light neutral mesons over a wide kinematic range. Combining state-of-the-art reconstruction techniques with the high statistics delivered by the LHC in Run 2 gives us the opportunity to enhance the precision of our measurements. In these proceedings, new ALICE run 2 preliminary results for neutral meson production in pp and Pb--Pb collisions at LHC energies are presented.Comment: arXiv admin note: text overlap with arXiv:2008.0203

Application of an indoor air pollution metamodel to a spatially-distributed housing stock

Estimates of population air pollution exposure typically rely on the outdoor component only, and rarely account for populations spending the majority of their time indoors. Housing is an important modifier of air pollution exposure due to outdoor pollution infiltrating indoors, and the removal of indoor-sourced pollution through active or passive ventilation. Here, we describe the application of an indoor air pollution modelling tool to a spatially distributed housing stock model for England and Wales, developed from Energy Performance Certificate (EPC) data and containing information for approximately 11.5 million dwellings. First, we estimate indoor/outdoor (I/O) ratios and total indoor concentrations of outdoor air pollution for PM2.5 and NO2 for all EPC dwellings in London. The potential to estimate concentration from both indoor and outdoor sources is then demonstrated by modelling indoor background CO levels for England and Wales pre- and post-energy efficient adaptation, including heating, cooking, and smoking as internal sources. In London, we predict a median I/O ratio of 0.60 (99% CIs; 0.53–0.73) for outdoor PM2.5 and 0.41 (99%CIs; 0.34–0.59) for outdoor NO2; Pearson correlation analysis indicates a greater spatial modification of PM2.5 exposure by housing (ρ = 0.81) than NO2 (ρ = 0.88). For the demonstrative CO model, concentrations ranged from 0.4–9.9 ppm (99%CIs)(median = 3.0 ppm) in kitchens and 0.3–25.6 ppm (median = 6.4 ppm) in living rooms. Clusters of elevated indoor concentration are found in urban areas due to higher outdoor concentrations and smaller dwellings with reduced ventilation potential, with an estimated 17.6% increase in the number of living rooms and 63% increase in the number of kitchens exceeding recommended exposure levels following retrofit without additional ventilation. The model has the potential to rapidly calculate indoor pollution exposure across large housing stocks and estimate changes to exposure under different pollution or housing policy scenarios

Evaluating alternate models to estimate genetic parameters of calving traits in United Kingdom Holstein-Friesian dairy cattle

<p>Abstract</p> <p>Background</p> <p>The focus in dairy cattle breeding is gradually shifting from production to functional traits and genetic parameters of calving traits are estimated more frequently. However, across countries, various statistical models are used to estimate these parameters. This study evaluates different models for calving ease and stillbirth in United Kingdom Holstein-Friesian cattle.</p> <p>Methods</p> <p>Data from first and later parity records were used. Genetic parameters for calving ease, stillbirth and gestation length were estimated using the restricted maximum likelihood method, considering different models i.e. sire (−maternal grandsire), animal, univariate and bivariate models. Gestation length was fitted as a correlated indicator trait and, for all three traits, genetic correlations between first and later parities were estimated. Potential bias in estimates was avoided by acknowledging a possible environmental direct-maternal covariance. The total heritable variance was estimated for each trait to discuss its theoretical importance and practical value. Prediction error variances and accuracies were calculated to compare the models.</p> <p>Results and discussion</p> <p>On average, direct and maternal heritabilities for calving traits were low, except for direct gestation length. Calving ease in first parity had a significant and negative direct-maternal genetic correlation. Gestation length was maternally correlated to stillbirth in first parity and directly correlated to calving ease in later parities. Multi-trait models had a slightly greater predictive ability than univariate models, especially for the lowly heritable traits. The computation time needed for sire (−maternal grandsire) models was much smaller than for animal models with only small differences in accuracy. The sire (−maternal grandsire) model was robust when additional genetic components were estimated, while the equivalent animal model had difficulties reaching convergence.</p> <p>Conclusions</p> <p>For the evaluation of calving traits, multi-trait models show a slight advantage over univariate models. Extended sire models (−maternal grandsire) are more practical and robust than animal models. Estimated genetic parameters for calving traits of UK Holstein cattle are consistent with literature. Calculating an aggregate estimated breeding value including direct and maternal values should encourage breeders to consider both direct and maternal effects in selection decisions.</p

Light neutral meson production in heavy ion collisions with ALICE in the era of precision physics at the LHC

The production of light neutral mesons in AA collisions probes the physics of the Quark-Gluon Plasma (QGP), which is formed in heavy-ion collisions at the LHC. More specifically, the centrality dependent neutral meson spectra in AA collisions compared to its spectra in minimum-bias pp collisions, scaled with the number of hard collisions, provides information on the energy loss of partons traversing the QGP. The measurement allows to test with high precision the predictions of theoretical model calculations. In addition, the decay of the π0 and η mesons are the dominant back- grounds for all direct photon measurements. Therefore, pushing the limits of the precision of neutral meson production is key to learning about the temperature and space-time evolution of the QGP. In the ALICE experiment neutral mesons can be detected via their decay into two photons. The latter can be reconstructed using the two calorimeters EMCal and PHOS or via conversions in the detector material. The excellent momentum resolution of the conversion photons down to very low pT and the high reconstruction efficiency and triggering capability of calorimeters at high pT, allow us to measure the pT dependent invariant yield of light neutral mesons over a wide kinematic range. Combining state-of-the-art reconstruction techniques with the high statistics delivered by the LHC in Run 2 gives us the opportunity to enhance the precision of our measurements. In these proceedings, new ALICE run 2 preliminary results for neutral meson production in pp and Pb–Pb collisions at LHC energies are presented.publishedVersio

Direct photon elliptic flow in Pb-Pb collisions at root s(NN)=2.76 TeV

The elliptic flow of inclusive and direct photons was measured at mid-rapidity in two centrality classes 0-20% and 20-40% in Pb-Pb collisions at root s(NN) = 2.76 TeV by ALICE. Photons were detected with the highly segmented electromagnetic calorimeter PHOS and via conversions in the detector material with the e(broken vertical bar)e pairs reconstructed in the central tracking system. The results of the two methods were combined and the direct-photon elliptic flow was extracted in the transverse momentum range 0.9 < p(T) < 6.2 GeV/c. A comparison to RHIC data shows a similar magnitude of the measured direct-photon elliptic flow. Hydrodynamic and transport model calculations are systematically lower than the data, but are found to be compatible. (C) 2018 The Author. Published by Elsevier B.V.Peer reviewe

Production of He-4 and (4) in Pb-Pb collisions at root(NN)-N-S=2.76 TeV at the LHC

Results on the production of He-4 and (4) nuclei in Pb-Pb collisions at root(NN)-N-S = 2.76 TeV in the rapidity range vertical bar y vertical bar <1, using the ALICE detector, are presented in this paper. The rapidity densities corresponding to 0-10% central events are found to be dN/dy4(He) = (0.8 +/- 0.4 (stat) +/- 0.3 (syst)) x 10(-6) and dN/dy4 = (1.1 +/- 0.4 (stat) +/- 0.2 (syst)) x 10(-6), respectively. This is in agreement with the statistical thermal model expectation assuming the same chemical freeze-out temperature (T-chem = 156 MeV) as for light hadrons. The measured ratio of (4)/He-4 is 1.4 +/- 0.8 (stat) +/- 0.5 (syst). (C) 2018 Published by Elsevier B.V.Peer reviewe

Light neutral meson production in the era of precision physics at the LHC

The production of light neutral mesons in different collision systems is interesting for a variety of reasons: In nucleus-nucleus (AA) collisions the measurements provide important information on the energy loss of partons traversing the Quark-Gluon Plasma (QGP) which is formed in heavy-ion collisions at the LHC. In proton--proton (pp) collisions, neutral mesons allow us to test with high precision the predictions of perturbative QCD and other model calculations, and also serve as a reference for pA and AA collisions. In pA collisions, cold nuclear matter effects are studied. In the ALICE experiment, which is dedicated to the study of the QGP, neutral mesons can be detected via their decay to two photons. The latter can be reconstructed using the two calorimeters EMCal and PHOS or via conversions in the detector material. Combining state-of-the-art reconstruction techniques with the large data sample delivered by the LHC in Run 2 gives us the opportunity to enhance the precision of our measurements. In these proceedings, an overview of neutral meson production in pp, p--Pb and Pb--Pb collisions at LHC energies, as measured with the ALICE detector is presented