Investigation of electrical noise in selenium-immersed thermistor bolometers

The selenium immersed, thermistor bolometer, IR detector failed due to spurious and escalating electrical noise outburst as a function of time at elevated temperatures during routine ground based testing in a space simulated environment. Spectrographic analysis of failed bolometers revealed selenium pure zones in the insulating selenium arsenic (Se-As) glass film which surrounds the active sintered Mn, Ni, Co oxide flake. The selenium pure film was identified as a potentially serious failure mechanism. Significant changes were instituted in the manufacturing techniques along with more stringent process controls which eliminated the selenium pure film and successfully produced 22study bolometers

Towards a Semantic Gas Source Localization under Uncertainty

Towards a Semantic Gas Source Localization under Uncertainty.Communications in Computer and Information Science book series (CCIS, volume 855), doi:10.1007/978-3-319-91479-4_42This work addresses the problem of efficiently and coherently locating a gas source in a domestic environment with a mobile robot, meaning efficiently the coverage of the shortest distance as possible and coherently the consideration of different gas sources explaining the gas presence. The main contribution is the exploitation, for the first time, of semantic relationships between the gases detected and the objects present in the environment to face this challenging issue. Our proposal also takes into account both the uncertainty inherent in the gas classification and object recognition processes. These uncertainties are combined through a probabilistic Bayesian framework to provide a priority-ordered list of (previously observed) objects to check. Moreover the proximity of the different candidates to the current robot location is also considered by a cost function, which output is used for planning the robot inspection path. We have conducted an initial demonstration of the suitability of our gas source localization approach by simulating this task within domestic environments for a variable number of objects, and comparing it with an greedy approach.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

High-cadence spectroscopy of M-dwarfs – II. Searching for stellar pulsations with HARPS

Stellar oscillations appear all across the Hertzsprung–Russell diagram. Recent theoretical studies support their existence also in the atmosphere of M dwarfs. These studies predict for them short periodicities ranging from 20 min to 3 h. Our Cool Tiny Beats (CTB) programme aims at finding these oscillations for the very first time. With this goal, CTB explores the short time domain of M dwarfs using radial velocity data from the High Accuracy Radial velocity Planet Searcher (HARPS)-European Southern Observatory and HARPS-N high-precision spectrographs. Here we present the results for the two most long-term stable targets observed to date with CTB, GJ 588 and GJ 699 (i.e. Barnard's star). In the first part of this work we detail the correction of several instrumental effects. These corrections are especially relevant when searching for subnight signals. Results show no significant signals in the range where M dwarfs pulsations were predicted. However, we estimate that stellar pulsations with amplitudes larger than ∼0.5 m s−1 can be detected with a 90 per cent completeness with our observations. This result, along with the excess of power regions detected in the periodograms, opens the possibility of non-resolved very low amplitude pulsation signals. Next generation more precise instrumentation would be required to detect such oscillations. However, the possibility of detecting pulsating M-dwarf stars with larger amplitudes is feasible due to the short size of the analysed sample. This motivates the need for completeness of the CTB survey

Nuclear Thermal Rocket Simulation in NPSS

Four nuclear thermal rocket (NTR) models have been created in the Numerical Propulsion System Simulation (NPSS) framework. The models are divided into two categories. One set is based upon the ZrC-graphite composite fuel element and tie tube-style reactor developed during the Nuclear Engine for Rocket Vehicle Application (NERVA) project in the late 1960s and early 1970s. The other reactor set is based upon a W-UO2 ceramic- metallic (CERMET) fuel element. Within each category, a small and a large thrust engine are modeled. The small engine models utilize RL-10 turbomachinery performance maps and have a thrust of approximately 33.4 kN (7,500 lbf ). The large engine models utilize scaled RL-60 turbomachinery performance maps and have a thrust of approximately 111.2 kN (25,000 lbf ). Power deposition profiles for each reactor were obtained from a detailed Monte Carlo N-Particle (MCNP5) model of the reactor cores. Performance factors such as thermodynamic state points, thrust, specific impulse, reactor power level, and maximum fuel temperature are analyzed for each engine design

The Antiferromagnetic Band Structure of La2CuO4 Revisited

Using the Becke-3-LYP functional, we have performed band structure calculations on the high temperature superconductor parent compound, La2CuO4. Under the restricted spin formalism (rho(alpha) equal to rho(beta)), the R-B3LYP band structure agrees well with the standard LDA band structure. It is metallic with a single Cu x2-y2/O p(sigma) band crossing the Fermi level. Under the unrestricted spin formalism (rho(alpha) not equal to rho(beta)), the UB3LYP band structure has a spin polarized antiferromagnetic solution with a band gap of 2.0 eV, agreeing well with experiment. This state is 1.0 eV (per formula unit) lower than that calculated from the R-B3LYP. The apparent high energy of the spin restricted state is attributed to an overestimate of on-site Coulomb repulsion which is corrected in the unrestricted spin calculations. The stabilization of the total energy with spin polarization arises primarily from the stabilization of the x2-y2 band, such that the character of the eigenstates at the top of the valence band in the antiferromagnetic state becomes a strong mixture of Cu x2-y2/O p(sigma) and Cu z2/O' p(z). Since the Hohenberg-Kohn theorem requires the spin restricted and spin unrestricted calculations give exactly the same ground state energy and total density for the exact functionals, this large disparity in energy reflects the inadequacy of current functionals for describing the cuprates. This calls into question the use of band structures based on current restricted spin density functionals (including LDA) as a basis for single band theories of superconductivity in these materials.Comment: 13 pages, 8 figures, to appear in Phys. Rev. B, for more information see http://www.firstprinciples.co

Strengthening demand, supply and enabling environment for sanitation in the Philippines

Two years after Super Typhoon Yolanda hit the Philippines, a semblance of normalcy is slowly returning to affected areas as victims build back stronger from the disaster. As part of the initial response, NGOs including Samaritan’s Purse (SP) supplied sanitation facilities for free but as conditions transitioned into recovery SP shifted to sanitation marketing strategies. Samaritan’s Purse created self-sustaining markets through demand creation of sanitation products and services, working to increase affordability and accessibility through the market channels, and supporting the private sector supply side of the sanitation chain in partnership with UNICEF, the Philippine Department of Education and other NGOs. This paper reflects the lessons learned from experiences with motivational factors involved in demand creation to purchase sanitation products, the engagement by the financial sector, and the growing activity of the local governing units in the program

Bioactive ceramic-reinforced composites for bone augmentation

Biomaterials have been used to repair the human body for millennia, but it is only since the 1970s that man-made composites have been used. Hydroxyapatite (HA)-reinforced polyethylene (PE) is the first of the ‘second-generation’ biomaterials that have been developed to be bioactive rather than bioinert. The mechanical properties have been characterized using quasi-static, fatigue, creep and fracture toughness testing, and these studies have allowed optimization of the production method. The in vitro and in vivo biological properties have been investigated with a range of filler content and have shown that the presence of sufficient bioactive filler leads to a bioactive composite. Finally, the material has been applied clinically, initially in the orbital floor and later in the middle ear. From this initial combination of HA in PE other bioactive ceramic polymer composites have been developed