Preliminary validation of an indirect method for discharge evaluation of Pertuso Spring (Central Italy)

This paper deals with the results of the first year of the Environmental Monitoring Plan, related to the catchment project of Pertuso Spring, which is going to be exploited to supply an important water network in the South part of Roma district. The study area is located in the Upper Valley of the Aniene River (Latium, Central Italy), in the outcrop of Triassic-Cenozoic carbonate rocks, and belong to an important karst aquifer. Pertuso Spring is the main outlet of this karst aquifer and is the one of the most important water resource in the southeast part of Latium Region, used for drinking, agriculture and hydroelectric supplies. Karst aquifer feeding Pertuso Spring is an open hydrogeological system aquifer characterized by complex interactions and exchanges between groundwater and surface water which influence the aquifer water budget. Thus, evaluation of groundwater discharge from this karst spring can be affected by difficulties in performing measurements because of the insufficient knowledge about water transfer processes in the hydrological cycle and geometry of drainage conduits. The aim of this paper is to assess the interactions between karst aquifer feeding Pertuso Spring and Aniene River based on stream discharge measurements and water geochemical tracer data in order to validate an indirect method for karst spring discharge evaluation. As a matter of fact, in this paper, there are presented the results of the application of Magnesium as a reliable tracer of karst spring discharge. This indirect method is based on the elaboration of surface water discharge measurements in relationship with Mg2+ concentration values, determined as for groundwater, coming from Pertuso Spring, as for surface water sample, collected upstream and downstream of Pertuso Spring, along Aniene River streamflow. The application of Magnesium as an environmental tracer provides a means to evaluate discharge of Pertuso Spring, as it came up to be a marker of the mixing of surface water and groundwater. On the other hand, the Magnesium ion concentration provides information for the identification of groundwater flow systems and the main hydrogeochemical processes affecting the composition of water within the karst aquifers

nZVI mobility and transport: laboratory test and numerical model

Zerovalent iron nanoparticles (nZVI) are becoming one of the most widely recommended nanomaterials for soil and groundwater remediation. However, when nZVI are injected in the groundwater flow, the behavior (mobility, dispersion, distribution) is practically unknown. This fact generally results in the use of enormous quantities of them at the field scale. The uncertainties are on the effective volumes reached from the plume of nZVI because their tendency to aggregate and their weight can cause their settling and deposition. So, the mobility of nanoparticles is a real issue, which can often lead to inefficient or expensive soil remediation. Furthermore, there is another aspect that must be considered: the fate of these nZVI in the groundwater and their possible impact on the subsoil environment. All these considerations have led us to propose an application of nZVI simulating the permeation technique through a laboratory experience, finalized to have a better, or even simpler description of their real behavior when injected in a flow in the subsoil. A two-dimensional laboratory-scale tank was used to study the dispersion and transport of nZVI. A nZVI solution, with a concentration equal to 4.54 g/L, was injected into glass beads, utilized as porous medium. The laboratory experiment included a digital camera to acquire the images. The images were then used for calibrating a numerical model. The results of the mass balance confirm the validity of the proposed numerical model, obtaining values of velocity (5.41 x 10(-3) m/s) and mass (1.9 g) of the nZVI of the same order of those from the experimental tests. Several information were inferred from both experimental and numerical tests. Both demonstrate that nZVI plume does not behave as a solute dissolved in water, but as a mass showing its own mobility ruled mainly from the buoyancy force. A simple simulation of a tracer input and a nZVI plume are compared to evidence the large differences between their evolution in time and space. This means that commercial numerical models, if not corrected, cannot furnish a real forecast of the volume of influence of the injected nZVI. Further deductions can be found from the images and confirmed by means the numerical model where the detachment effect is much smaller than the attachment one (ratio k(d)/k(a) = 0.001). From what is reported, it is worthwhile to pay attention on the localization of the contaminants source/plume to reach an effective treatment and it is important to go further in the improvement of solution for the limiting the nanoparticles aggregation phenomenon

Hydraulic conductivity estimation using low-flow purging data elaboration in contaminated sites

Hydrogeological characterization is required when investigating contaminated sites, and hydraulic conductivity is an important parameter that needs to be estimated. Before groundwater sampling, well water level values are measured during low-flow purging to check the correct driving of the activity. However, these data are generally considered only as an indicator of an adequate well purging. In this paper, water levels and purging flow rates were considered to estimate hydraulic conductivity values in an alluvial aquifer, and the obtained results were compared with traditional hydraulic conductivity test results carried on in the same area. To test the applicability of this method, data coming from 59 wells located in the alluvial aquifer of Malagrotta waste disposal site, a large area of 160 ha near Rome, were analyzed and processed. Hydraulic conductivity values were estimated by applying the Dupuit's hypothesis for steady-state radial flow in an unconfined aquifer, as these are the hydraulic conditions in pumping wells for remediation purposes. This study aims to show that low-flow purging procedures in monitoring wells-carried out before sampling for groundwater characterization-represent an easy and inexpensive method for soil hydraulic conductivity estimation with good feasibility, if correctly carried on

Karst spring recharge areas and discharge relationship by oxygen-18 and deuterium isotopes analyses. A case study in southern latium region, Italy

Karst aquifer recharge areas are usually difficult to identify because of the complexity of these aquifers' characteristics. On the other hand, their identification is very important in the aim of protecting the groundwater resources that these aquifers host. Regarding this topic, this paper presents an approach aimed at identifying karst aquifer recharge areas by the application of oxygen-18 and deuterium isotopes composition of groundwater coupled with hydrological features. Oxygen-18 and deuterium isotope composition of Capodacqua di Spigno Spring, in the South of the Latium Region, has been applied with rainfall and discharge values related to the feeding aquifer of this spring. As δ18O and δ2H values of groundwater samples are natural tracers of the recharge area's elevation, we propose a model, based on the distribution of the basin surfaces involved as recharge areas, in relation to elevations. The model estimates, for any discharge value, the percentage of the topographic area involved in the aquifer recharge. The setting up of this simulated distribution is supported by a Weibull cumulative probability function. The results show that the measured discharges increase as larger areas with lower elevations are involved in the recharge process

Quality of dying in hospital general wards: a cross-sectional study about the end-of-life care

Abstract Background In the last decade, access to national palliative care programs have improved, however a large proportion of patients continued to die in hospital, particularly within internal medicine wards. Objectives To describe treatments, symptoms and clinical management of adult patients at the end of their life and explore whether these differ according to expectation of death. Methods Single-centre cross-sectional study performed in the medical and surgical wards of a large tertiary-level university teaching hospital in the north of Italy. Data on nursing interventions and diagnostic procedure in proximity of death were collected after interviewing the nurse and the physician responsible for the patient. Relationship between nursing treatments delivered and patients’ characteristics, quality of dying and nurses’ expectation about death was summarized by means of multiple correspondence analysis (MCA). Results Few treatments were found statistically associated with expectation of death in the 187 patients included. In the last 48 h, routine (70.6%) and biomarkers (41.7%) blood tests were performed, at higher extent on patients whose death was not expected. Many symptoms classified as severe were reported when death was highly expected, except for agitation and respiratory fatigue which were reported when death was moderately expected. A high Norton score and absence of anti-bedsore mattress were associated with unexpected death and poor quality of dying, as summarized by MCA. Quality of dying was perceived as good by nurses when death was moderately and highly expected. Physicians rated more frequently than nurses the quality of dying as good or very good, respectively 78.6 and 57.8%, denoting a fair agreement between the two professionals (k = 0.24, P <  0.001). The palliative care consultant was requested for only two patients. Conclusion Staff in medical and surgical wards still deal inadequately with the needs of dying people. Presence of hospital-based specialist palliative care could lead to improvements in the patients’ quality of life