The Zero-Lift Drag of Several Configurations of the XAAM-N-2 Pilotless Aircraft. TED No. NACA DE332

Free-flight tests have been made to determine the zero-lift drag of several configurations of the XAAM-N-2 pilotless aircraft. Base-pressure measurements were also obtained for some of the configurations. The results show that increasing the wing-thickness ratio from 4 to 6 percent increased the wing drag by about 100 percent at M = 1.3 and by about 30 percent at M = 1.8. Increasing the nose fineness ratio from 5.00 to 6.25 reduced the drag coefficient of the wingless models a maximum of about 0.030 (10 percent) at M = 2.0. A corresponding change in nose shape for the winged models decreased the drag coefficient by about 0.05 in the Mach number range from 1.1 to 1.4; at Mach numbers greater than 1.6 no measurable reduction in drag coefficient was obtained. The drag of the present Sparrow fuselage is less than that of a parabolic fuselage which could contain the same equipment

IMPACT EVALUATION FOR THE MANUFACTURED HOUSING ACQUISITION PROGRAM (MAP)

This report presents the results of an impact evaluation of the Manufactured Housing Acquisition Program. This evaluation was conducted for Bonneville by Pacific Northwest Laboratory to determine MAP's energy impacts and cost-effectiveness. We conducted a three-tiered analysis of the utility billing data to estimate program electriccty savings. The first (a raw billing data comparison and simple regression analysis) and second (PRISM) tier analyses provided useful findings for the third-tier analysis by which program savings were estimated. The third-tier approach used a conditional demand type regression analysis to analyze monthly energy consumption, taking into account significant factors likely to influence electricrty usage. We used the regression results to estimate energy savings under "normal" weather conditions for each climate zone. We determined cost-effectiveness by calculating levelized costs using a methodology published by Bonneville. We analyzed potential market transformation effects from a conceptual viewpoint. Our results suggested that MAP's market transformation benefits probably reduced the levelized cost to utilities by 40% or more

Effect of acute copper sulfate exposure on olfactory responses to amino acids and pheromones in goldfish (Carassius auratus)

Exposure of olfactory epithelium to environmentally relevant concentrations of copper disrupts olfaction in fish. To examine the dynamics of recovery at both functional and morphological levels after acute copper exposure, unilateral exposure of goldfish olfactory epithelia to 100 μM CuSO4 (10 min) was followed by electro-olfactogram (EOG) recording and scanning electron microscopy. Sensitivity to amino acids (L-arginine and L-serine), generally considered food-related odorants, recovered most rapidly (three days), followed by that to catecholamines(3-O-methoxytyramine),bileacids(taurolithocholic acid) and the steroid pheromone, 17,20 -dihydroxy-4-pregnen- 3-one 20-sulfate, which took 28 days to reach full recovery. Sensitivity to the postovulatory pheromone prostaglandin F2R had not fully recovered even at 28 days. These changes in sensitivity were correlated with changes in the recovery of ciliated and microvillous receptor cell types. Microvillous cells appeared largely unaffected by CuSO4 treatment. Cilia in ciliated receptor neurones, however, appeared damaged one day post-treatment and were virtually absent after three days but had begun to recover after 14 days. Together, these results support the hypothesis that microvillous receptor neurones detect amino acids whereas ciliated receptor neurones were not functional and are responsible for detection of social stimuli (bile acidsandpheromones).Furthermore, differences in sensitivity to copper may be due to different transduction pathways in the different cell types

Pressurised hot water extraction in continuous flow mode for thermolabile compounds: extraction of polyphenols in red onions

Abstract Extraction and analysis of labile compounds in complex sample matrices, such as plants, is often a big analytical challenge. In this work, the use of a "green and clean" pressurised hot water extraction (PHWE) approach performed in continuous flow mode is explored. Experimental data for extraction and degradation kinetics of selected compounds were utilised to develop a continuous flow extraction (CFE) method targeting thermolabile polyphenols in red onions, with detection by high-performance liquid chromatography (HPLC)-diode array detection (DAD)-mass spectrometry (MS). Water containing ethanol and formic acid was used as extraction solvent. Method performance was focused on extraction yield with minimal analyte degradation. By adjusting the flow rate of the extraction solvent, degradation effects were minimised, and complete extraction could be achieved within 60 min. The CFE extraction yields of the polyphenols investigated were 80-90 % of the theoretically calculated quantitative yields and were significantly higher than the yields obtained by conventional methanol extraction and static batch extraction (70-79 and 58-67 % of the theoretical yields, respectively). The precision of the developed method was lower than 8 % expressed as relative standard deviation

The SCottish Alcoholic Liver disease Evaluation: a population-level matched cohort study of hospital-based costs, 1991-2011

Studies assessing the costs of alcoholic liver disease are lacking. We aimed to calculate the costs of hospitalisations before and after diagnosis compared to population controls matched by age, sex and socio-economic deprivation. We aimed to use population level data to identify a cohort of individuals hospitalised for the first time with alcoholic liver disease in Scotland between 1991 and 2011.Incident cases were classified by disease severity, sex, age group, socio-economic deprivation and year of index admission. 5 matched controls for every incident case were identified from the Scottish population level primary care database. Hospital costs were calculated for both cases and controls using length of stay from morbidity records and hospital-specific daily rates by specialty. Remaining lifetime costs were estimated using parametric survival models and predicted annual costs. 35,208 incident alcoholic liver disease hospitalisations were identified. Mean annual hospital costs for cases were 2.3 times that of controls pre diagnosis (£804 higher) and 10.2 times (£12,774 higher) post diagnosis. Mean incident admission cost was £6,663. Remaining lifetime cost for a male, 50-59 years old, living in the most deprived area diagnosed with acoholic liver disease was estimated to be £65,999 higher than the matched controls (£12,474 for 7.43 years remaining life compared to £1,224 for 21.8 years). In Scotland, alcoholic liver disease diagnosis is associated with significant increases in admissions to hospital both before and after diagnosis. Our results provide robust population level estimates of costs of alcoholic liver disease for the purposes of health-care delivery, planning and future cost-effectiveness analyses

A Review of the Reflector Compact Fluorescent Lights Technology Procurement Program: Conclusions and Results

This report describes a project sponsored by the U.S. Department of Energy (DOE) and implemented by the Pacific Northwest National Laboratory (PNNL), from 2000 to 2007 to improve the performance of reflector type (R-lamp) compact fluorescent lamps (CFLs) and increase their availability throughout the United States by means of a technology development and procurement strategy. In 2000, at the request of the U.S. Department of Energy’s Emerging Technologies Program and its predecessors, the Pacific Northwest National Laboratory undertook a technology procurement seeking R-CFLs that were specifically designed for use in ICAT recessed can fixtures and that met other minimum performance criteria including minimum light output and size restrictions (to ensure they fit in standard residential recessed cans). The technology procurement included two phases. In Phase I, requests for proposals (RFPs) were issued in October 2002 and five manufacturers responded with 12 lamp models. Eight of these models met the minimum requirements and passed the 6-hour short-term test in a simulated ICAT environment. These eight models were subjected to long-term tests of 6,000 or more hours in a simulated ICAT environment. Three of these models passed the short- and long-term tests and were promoted through the program website (www.pnl.gov/rlamps), press releases, and fliers. To increase the number of qualifying models, a second RFP was issued in June 2005. In April 2007, DOE announced that 16 reflector CFL (R-CFL) models by four manufacturers had met all the minimum requirements of Phase 2 of the R-CFL Technology Innovation Competition. PNNL developed both the criteria and the test apparatus design for Elevated Temperature Life Testing (ETLT), which has been included by DOE in its draft ENERGY STAR specifications for the reflector category of CFLs. PNNL promoted the winning lamps through a program website, press releases, and fliers as well as through program partners. PNNL also helped engage distributors including Costco, the Home Depot, Bonneville Power Administration, and utility organizations