Metrología óptica dimensional submicrométrica para determinación de espesores en sub-micro estructuras

En este trabajo se presenta el análisis de una técnica de metrología óptica utilizada para el control de procesos en línea en la fabricación de microchips. Se obtienen los perfiles de reflectividad en función del ángulo de incidencia para una longitud de onda de 675 nm, para los estados de polarización s y p. Se obtiene un modelo teórico para una estructura multicapa, con la que se pueden calcular de forma sencilla las propiedades ópticas y dimensiones de las capas. Se obtiene la incertidumbre de la técnica de medida.-In this work is presented the analysis of a technique of optical metrology widely used in controlling on- line process in fabrication of microchips. Reflectivity profiles as a function of angle of incidence are obtained for a wavelength of 675 nm. A theoretical model for a Si/ SiO2 multilayer stack is also obtained, which can be used to calculate both the thickness and the optical properties of the layers. A calculation of the uncertainty for the measurement technique is also performed

Análisis de Tensiones Residuales Inducidas en Aleaciones Metálicas por Tratamientos Superficiales mediante Ondas de Choque Generadas por Láser

En el presente artículo se plantea un estudio sobre la medida de tensiones residuales mediante el método del taladro en banda extensométrica (o agujero ciego) aplicado en probetas de aluminio 2024-T351, previamente tratadas superficialmente mediante laser shock processing (método de tratamiento superficial por ondas de choque generadas por láser, conocido como LSP). Finalmente, se realiza una comparación entre los resultados experimentales obtenidos al medir las tensiones residuales obtenidas en probetas tratadas mediante LSP y los valores obtenidos mediante un modelo de simulación

Microconformado de Materiales Metálicos mediante Pulsos Láser en el Dominio de ns

La demanda de miniaturización introducida, entre otros, por la industria de fabricación de MEMS (Micro Electro Mechanical Systems), hace necesario caracterizar y validar los procesos que emplean el láser en el microconformado de materiales metálicos a escala submilimétrica. Como alternativa al microconformado térmico, que hace uso de las deformaciones de origen térmico inducidas por la radiación láser, el microconformado mediante pulsos láser en el dominio de ns hace posible el conformado de materiales metálicos manteniendo, o incluso mejorando, las propiedades mecánicas de los mismos debido a la inducción de tensiones residuales de compresión en la superficie de la pieza tratada. Se presenta en este trabajo el estudio teórico y experimental del microconformado láser mediante la caracterización de diversas pruebas elementales. Miniaturization of components demanded by MEMS (Micro Electro Mechanical Systems) industry, makes necessary the validation of the manufacturing processes applied to submillimetric metallic materials in which laser is used. As an alternative to thermal microforming in which laser induced thermal fields are responsible for the forming phenomena, the use of ns laser pulses makes possible microforming of metallic materials preserving, or even improving, their mechanical properties, due to the induction of residual stresses in the surface. In the present paper experimental tests and FEM simulation results on nanosecond time scale laser microforming are presented

Molecular simulations of the synthesis of periodic mesoporous silica phases at high surfactant concentrations

Molecular dynamics simulations of a coarse-grained model are used to study the formation mechanism of periodic mesoporous silica over a wide range of cationic surfactant concentrations. This follows up on an earlier study of systems with low surfactant concentrations. We started by studying the phase diagram of the surfactant-water system and found that our model shows good qualitative agreement with experiments with respect to the surfactant concentrations where various phases appear. We then considered the impact of silicate species upon the morphologies formed. We have found that even in concentrated surfactant systems --in the concentration range where pure surfactant solutions yield a liquid crystal phase -- the liquid-crystal templating mechanism is not viable because the preformed liquid crystal collapses as silica monomers are added into the solution. Upon the addition of silica dimers, a new phase-separated hexagonal array is formed. The preformed liquid crystals were found to be unstable in the presence of monomeric silicates. In addition, the silica dimer is found to be essential for mesoscale ordering at both low and high surfactant concentrations. Our results support the view that a cooperative interaction of anionic silica oligomers and cationic surfactants determines the mesostructure formation in the M41S family of materials.publishe

Factores de transferencia suelo-planta de Elementos Tierras Raras en arroz (Oryza sativa L.)

International audienceThe present study describes the distribution and bioaccumulation of rare earth elements (REEs) in rice plants grown in San Pedro farm, located in San José de las Lajas Municipality, Mayabeque Province, Cuba. The results indicate that accumulation of REEs in different parts of plants follows the order: root>leaf>husk>grain. The transfer factor (TF) values of REEs in rice were determined, confirming that REE content in rice grains, roots, leaves and husks do not attempt on their use for human consumption and animal food, respectively.El presente estudio describe la distribución y bioacumulación de Elementos Tierras Raras (ETRs) en plantas de arroz provenientes de la finca San Pedro, ubicada en el municipio de San José de la Lajas, provincia de Mayabeque. Los resultados indican que la acumulación de los ETRs en las diferentes partes de la planta, siguen el comportamiento: raíz>hoja>cáscara>grano. Se determinan los valores del Factor de Transferencia (FT) de ETRs in arroz, confirmando que el contenido de ETRs en los granos de arroz, raíces, horas y cáscaras del grano no atentan contra su empleo como consumo humano y alimento animal, respectivamente

Qué necesitan los estudiantes de Periodismo para su inserción laboral. Análisis de la demanda del mercado laboral de las empresas de comunicación.

PIMCD nº 176, realizado por el grupo Research and Learning of Media and Communications Management. Investigación y Enseñanza de la Gestión de los Medios y la Comunicación (MediaCom UCM) www.ccinf.es/mediacom/Primera fase de trabajo para fijar descriptores que identifiquen comportamientos formativos de entrada en el mercado laboral. En esta fase se han encontrado 442 oferentes de contratos en prácticas para estudiantes de Periodismo. Los datos obtenidos se articulan de acuerdo a dos subsecciones: sectores empresariales y empresas; a su vez, cada subsector, atendiendo al índice de recepción de alumnos y la descripción cualitativa de los puestos.Depto. de Periodismo y Comunicación GlobalFac. de Ciencias de la InformaciónFALSEsubmitte

Manejo Integral de Agua y Suelo en Centroamérica. Bases científicas para el desarrollo rural comunitario.

Este libro recoge los frutos de la colaboración y trabajo conjunto de un grupo de Universidades Iberoamericanas entre 2007 y 2012 el marco de las actividades del Programa de Cooperación Comunidad, Agua y Bosque en Centroamérica (CAB Centroamérica, http://www2.caminos.upm.es/Departamentos/imt/Topografia/Cab/cab.html ). Las actividades se han realizado con el apoyo del Programa de Cooperación Universitaria PCI-AECID IBEROAMÉRICA, de la Dirección de Cooperación para el Desarrollo de la Universidad Politécnica de Madrid y de los fondos propios de las Universidades latinoamericanas, con especial mención a la Universidad de Costa Rica, coordinadora de los trabajos en Centroamérica. El inicio de esta colaboración se produjo en 2007 a partir de la identificación de un objetivo común: profundizar la investigación sobre la dinámica agua-suelo-planta para mejorar la producción y la calidad del agua de los sistemas de abastecimiento comunitarios en Centroamérica

A correlative biomarker study and integrative prognostic model in chemotherapy-naïve metastatic castration-resistant prostate cancer treated with enzalutamide

There is a considerable need to incorporate biomarkers of resistance to new antiandrogen agents in the management of castration-resistant prostate cancer (CRPC). We conducted a phase II trial of enzalutamide in first-line chemo-naïve asymptomatic or minimally symptomatic mCRPC and analyzed the prognostic value of TMPRSS2-ERG and other biomarkers, including circulating tumor cells (CTCs), androgen receptor splice variant (AR-V7) in CTCs and plasma Androgen Receptor copy number gain (AR-gain). These biomarkers were correlated with treatment response and survival outcomes and developed a clinical-molecular prognostic model using penalized cox-proportional hazard model. This model was validated in an independent cohort. Ninety-eight patients were included. TMPRSS2-ERG fusion gene was detected in 32 patients with no differences observed in efficacy outcomes. CTC detection was associated with worse outcome and AR-V7 in CTCs was associated with increased rate of progression as best response. Plasma AR gain was strongly associated with an adverse outcome, with worse median prostate specific antigen (PSA)-PFS (4.2 vs. 14.7 m; p < 0.0001), rad-PFS (4.5 vs. 27.6 m; p < 0.0001), and OS (12.7 vs. 38.1 m; p < 0.0001). The clinical prognostic model developed in PREVAIL was validated (C-Index 0.70) and the addition of plasma AR (C-Index 0.79; p < 0.001) increased its prognostic ability. We generated a parsimonious model including alkaline phosphatase (ALP); PSA and AR gain (C-index 0.78) that was validated in an independent cohort. TMPRSS2-ERG detection did not correlate with differential activity of enzalutamide in first-line mCRPC. However, we observed that CTCs and plasma AR gain were the most relevant biomarkers

Additive effects of LPL, APOA5 and APOE variant combinations on triglyceride levels and hypertriglyceridemia: results of the ICARIA genetic sub-study

<p>Abstract</p> <p>Background</p> <p>Hypertriglyceridemia (HTG) is a well-established independent risk factor for cardiovascular disease and the influence of several genetic variants in genes related with triglyceride (TG) metabolism has been described, including <it>LPL</it>, <it>APOA5 </it>and <it>APOE</it>. The combined analysis of these polymorphisms could produce clinically meaningful complementary information.</p> <p>Methods</p> <p>A subgroup of the ICARIA study comprising 1825 Spanish subjects (80% men, mean age 36 years) was genotyped for the <it>LPL</it>-HindIII (rs320), S447X (rs328), D9N (rs1801177) and N291S (rs268) polymorphisms, the <it>APOA5</it>-S19W (rs3135506) and -1131T/C (rs662799) variants, and the <it>APOE </it>polymorphism (rs429358; rs7412) using PCR and restriction analysis and TaqMan assays. We used regression analyses to examine their combined effects on TG levels (with the log-transformed variable) and the association of variant combinations with TG levels and hypertriglyceridemia (TG ≥ 1.69 mmol/L), including the covariates: gender, age, waist circumference, blood glucose, blood pressure, smoking and alcohol consumption.</p> <p>Results</p> <p>We found a significant lowering effect of the <it>LPL</it>-HindIII and S447X polymorphisms (<it>p </it>< 0.0001). In addition, the D9N, N291S, S19W and -1131T/C variants and the <it>APOE</it>-ε4 allele were significantly associated with an independent additive TG-raising effect (<it>p </it>< 0.05, <it>p </it>< 0.01, <it>p </it>< 0.001, <it>p </it>< 0.0001 and <it>p </it>< 0.001, respectively). Grouping individuals according to the presence of TG-lowering or TG-raising polymorphisms showed significant differences in TG levels (<it>p </it>< 0.0001), with the lowest levels exhibited by carriers of two lowering variants (10.2% reduction in TG geometric mean with respect to individuals who were homozygous for the frequent alleles of all the variants), and the highest levels in carriers of raising combinations (25.1% mean TG increase). Thus, carrying two lowering variants was protective against HTG (OR = 0.62; 95% CI, 0.39-0.98; <it>p </it>= 0.042) and having one single raising polymorphism (OR = 1.20; 95% CI, 1.39-2.87; <it>p </it>< 0.001) or more (2 or 3 raising variants; OR = 2.90; 95% CI, 1.56-5.41; <it>p </it>< 0.001) were associated with HTG.</p> <p>Conclusion</p> <p>Our results showed a significant independent additive effect on TG levels of the <it>LPL </it>polymorphisms HindIII, S447X, D9N and N291S; the S19W and -1131T/C variants of <it>APOA5</it>, and the ε4 allele of <it>APOE </it>in our study population. Moreover, some of the variant combinations studied were significantly associated with the absence or the presence of hypertriglyceridemia.</p