Spatial variability of void structure in thin stochastic fibrous materials

Theory is presented for the distributions of local process intensity and local average pore dimensions in random fibrous materials. For complete partitioning of the network into contiguous square zones, the variance of local process intensity is shown to be proportional to the mean process intensity and inversely proportional to the zone size. The coefficient of variation of local average pore area is shown to be approximately double that of the local average pore diameter with both properties being inversely proportional to the square root of zone size and mean process intensity. The results have relevance to heterogenous near-planar fibrous materials including paper, nonwoven textiles, nanofibrous composites and electrospun polymer fibre networks.Comment: 15 pages, 7 figure

Stress transfer in microfibrillated cellulose reinforced poly(vinyl alcohol) composites

Copyright © 2014 Elsevier. NOTICE: this is the author’s version of a work that was accepted for publication in Composites Part A: Applied Science and Manufacturing. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Composites Part A: Applied Science and Manufacturing Vol. 65 (2014), DOI: 10.1016/j.compositesa.2014.06.014Combined homogenisation and sonication treatments of micron-sized lyocell fibres were used to generate microfibrillated cellulose (MFC) with fibril diameters of ∼350 nm. No further reduction in fibril diameter was observed after 30 min treatment. Poly(vinyl alcohol) (PVA) composites reinforced with these fibrils were fabricated using solvent casting and physical and mechanical properties were investigated. The presence of MFC in PVA increased the thermal degradation of the polymer. An increase in both the tensile strength and modulus of the composites was observed for up to 3 wt.% of fibrils; beyond this point no significant increases were observed. An estimate of ∼39 GPa is made for the fibril modulus based on this increase. Stress-transfer between the polymer resin and the fibrils was investigated using Raman spectroscopy. Stress transfer in the composite is shown to be greater than that of a pure network of fibres, indicating a good fibre–matrix bond.Royal Thai Governmen

Standardization and performance evaluation of mononuclear cell cytokine secretion assays in a multicenter study

BACKGROUND: Cryopreservation of peripheral blood mononuclear cells has been used to preserve and standardize immunologic measurements for multicenter studies, however, effects of cryopreservation on cytokine responses are incompletely understood. In designing immunologic studies for a new multicenter birth cohort study of childhood asthma, we performed a series of experiments to determine the effects of two different methods of cryopreservation on the cytokine responses of cord and peripheral blood mononuclear cells. RESULTS: Paired samples of PBMC were processed freshly, or after cryopreservation in a Nalgene container (NC) or a controlled-rate freezer (CRF). Although there were some differences between the methods, cryopreservation inhibited PHA-induced IL-10 secretion and Der f 1-induced IL-2 secretion, and augmented PHA-induced IL-2 secretion and spontaneous secretion of TNF-α. In separate experiments, NC cryopreservation inhibited secretion of several cytokines (IL-13, IL-10, IFN-γ, TNF-α) by PHA-stimulated cord blood mononuclear cells. With the exception of PHA-induced IL-13, results from fresh and cryopreserved cord blood samples were not significantly correlated. Finally, in reproducibility studies involving processing of identical cell samples in up to 4 separate laboratories, variances in cytokine responses of fresh cells stimulated at separate sites did not exceed those in cryopreserved cells stimulated at a central site. CONCLUSION: Collectively, these studies indicate that cryopreservation can affect mononuclear cell cytokine response profiles, and that IL-10 secretion and antigen-induced responses may be especially vulnerable. These studies also demonstrate that mononuclear cell responses can be standardized for performance in a small number of laboratories for multicenter studies, and underscore the importance of measuring reproducibility and of testing whether cryopreservation techniques alter specific immunologic outcomes

Influence of biological origin on the tensile properties of cellulose nanopapers

From Springer Nature via Jisc Publications RouterHistory: received 2021-02-11, accepted 2021-05-09, registration 2021-05-09, pub-electronic 2021-05-22, online 2021-05-22, pub-print 2021-07Publication status: PublishedFunder: Engineering and Physical Sciences Research Council; doi: http://dx.doi.org/10.13039/501100000266; Grant(s): EP/K014676/1Funder: Academy of Finland; Grant(s): 310943Funder: Aalto UniversityAbstract: Cellulose nanopapers provide diverse, strong and lightweight templates prepared entirely from sustainable raw materials, cellulose nanofibers (CNFs). Yet the strength of CNFs has not been fully capitalized in the resulting nanopapers and the relative influence of CNF strength, their bonding, and biological origin to nanopaper strength are unknown. Here, we show that basic principles from paper physics can be applied to CNF nanopapers to illuminate those relationships. Importantly, it appeared that ~ 200 MPa was the theoretical maximum for nanopapers with random fibril orientation. Furthermore, we demonstrate the contrast in tensile strength for nanopapers prepared from bacterial cellulose (BC) and wood-based nanofibrillated cellulose (NFC). Endemic amorphous polysaccharides (hemicelluloses) in NFC act as matrix in NFC nanopapers, strengthening the bonding between CNFs just like it improves the bonding between CNFs in the primary cell wall of plants. The conclusions apply to all composites containing non-woven fiber mats as reinforcement. Graphic abstract

Supernova Remnants in the Sedov Expansion Phase: Thermal X-Ray Emission

Improved calculations of X-ray spectra for supernova remnants (SNRs) in the Sedov-Taylor phase are reported, which for the first time include reliable atomic data for Fe L-shell lines. This new set of Sedov models also allows for a partial collisionless heating of electrons at the blast wave and for energy transfer from ions to electrons through Coulomb collisions. X-ray emission calculations are based on the updated Hamilton-Sarazin spectral model. The calculated X-ray spectra are succesfully interpreted in terms of three distribution functions: the electron temperature and ionization timescale distributions, and the ionization timescale averaged electron temperature distribution. The comparison of Sedov models with a frequently used single nonequilibrium ionization (NEI) timescale model reveals that this simple model is generally not an appropriate approximation to X-ray spectra of SNRs. We find instead that plane-parallel shocks provide a useful approximation to X-ray spectra of SNRs, particularly for young SNRs. Sedov X-ray models described here, together with simpler plane shock and single ionization timescale models, have been implemented as standard models in the widely used XSPEC v11 spectral software package.Comment: 19 pages, 11 figures, submitted to Astrophysical Journa

Editorial Peer Reviewers' Recommendations at a General Medical Journal: Are They Reliable and Do Editors Care?

BACKGROUND: Editorial peer review is universally used but little studied. We examined the relationship between external reviewers' recommendations and the editorial outcome of manuscripts undergoing external peer-review at the Journal of General Internal Medicine (JGIM). METHODOLOGY/PRINCIPAL FINDINGS: We examined reviewer recommendations and editors' decisions at JGIM between 2004 and 2008. For manuscripts undergoing peer review, we calculated chance-corrected agreement among reviewers on recommendations to reject versus accept or revise. Using mixed effects logistic regression models, we estimated intra-class correlation coefficients (ICC) at the reviewer and manuscript level. Finally, we examined the probability of rejection in relation to reviewer agreement and disagreement. The 2264 manuscripts sent for external review during the study period received 5881 reviews provided by 2916 reviewers; 28% of reviews recommended rejection. Chance corrected agreement (kappa statistic) on rejection among reviewers was 0.11 (p<.01). In mixed effects models adjusting for study year and manuscript type, the reviewer-level ICC was 0.23 (95% confidence interval [CI], 0.19-0.29) and the manuscript-level ICC was 0.17 (95% CI, 0.12-0.22). The editors' overall rejection rate was 48%: 88% when all reviewers for a manuscript agreed on rejection (7% of manuscripts) and 20% when all reviewers agreed that the manuscript should not be rejected (48% of manuscripts) (p<0.01). CONCLUSIONS/SIGNIFICANCE: Reviewers at JGIM agreed on recommendations to reject vs. accept/revise at levels barely beyond chance, yet editors placed considerable weight on reviewers' recommendations. Efforts are needed to improve the reliability of the peer-review process while helping editors understand the limitations of reviewers' recommendations

Measurement of inclusive D*+- and associated dijet cross sections in photoproduction at HERA

Inclusive photoproduction of D*+- mesons has been measured for photon-proton centre-of-mass energies in the range 130 < W < 280 GeV and a photon virtuality Q^2 < 1 GeV^2. The data sample used corresponds to an integrated luminosity of 37 pb^-1. Total and differential cross sections as functions of the D* transverse momentum and pseudorapidity are presented in restricted kinematical regions and the data are compared with next-to-leading order (NLO) perturbative QCD calculations using the "massive charm" and "massless charm" schemes. The measured cross sections are generally above the NLO calculations, in particular in the forward (proton) direction. The large data sample also allows the study of dijet production associated with charm. A significant resolved as well as a direct photon component contribute to the cross section. Leading order QCD Monte Carlo calculations indicate that the resolved contribution arises from a significant charm component in the photon. A massive charm NLO parton level calculation yields lower cross sections compared to the measured results in a kinematic region where the resolved photon contribution is significant.Comment: 32 pages including 6 figure

Measurement of Jet Shapes in Photoproduction at HERA

The shape of jets produced in quasi-real photon-proton collisions at centre-of-mass energies in the range $134-277$ GeV has been measured using the hadronic energy flow. The measurement was done with the ZEUS detector at HERA. Jets are identified using a cone algorithm in the $\eta - \phi$ plane with a cone radius of one unit. Measured jet shapes both in inclusive jet and dijet production with transverse energies $E^{jet}_T>14$ GeV are presented. The jet shape broadens as the jet pseudorapidity ($\eta^{jet}$) increases and narrows as $E^{jet}_T$ increases. In dijet photoproduction, the jet shapes have been measured separately for samples dominated by resolved and by direct processes. Leading-logarithm parton-shower Monte Carlo calculations of resolved and direct processes describe well the measured jet shapes except for the inclusive production of jets with high $\eta^{jet}$ and low $E^{jet}_T$. The observed broadening of the jet shape as $\eta^{jet}$ increases is consistent with the predicted increase in the fraction of final state gluon jets.Comment: 29 pages including 9 figure

National Network of Depression Centers\u27 Recommendations on Harmonizing Clinical Documentation of Electroconvulsive Therapy

Electroconvulsive therapy (ECT) is a highly therapeutic and cost-effective treatment for severe and/or treatment-resistant major depression. However, because of the varied clinical practices, there is a great deal of heterogeneity in how ECT is delivered and documented. This represents both an opportunity to study how differences in implementation influence clinical outcomes and a challenge for carrying out coordinated quality improvement and research efforts across multiple ECT centers. The National Network of Depression Centers, a consortium of 26+ US academic medical centers of excellence providing care for patients with mood disorders, formed a task group with the goals of promoting best clinical practices for the delivery of ECT and to facilitate large-scale, multisite quality improvement and research to advance more effective and safe use of this treatment modality. The National Network of Depression Centers Task Group on ECT set out to define best practices for harmonizing the clinical documentation of ECT across treatment centers to promote clinical interoperability and facilitate a nationwide collaboration that would enable multisite quality improvement and longitudinal research in real-world settings. This article reports on the work of this effort. It focuses on the use of ECT for major depressive disorder, which accounts for the majority of ECT referrals in most countries. However, most of the recommendations on clinical documentation proposed herein will be applicable to the use of ECT for any of its indications

Structure of an Engineered β-Lactamase Maltose Binding Protein Fusion Protein: Insights into Heterotropic Allosteric Regulation

Engineering novel allostery into existing proteins is a challenging endeavor to obtain novel sensors, therapeutic proteins, or modulate metabolic and cellular processes. The RG13 protein achieves such allostery by inserting a circularly permuted TEM-1 β-lactamase gene into the maltose binding protein (MBP). RG13 is positively regulated by maltose yet is, serendipitously, inhibited by Zn2+ at low µM concentration. To probe the structure and allostery of RG13, we crystallized RG13 in the presence of mM Zn2+ concentration and determined its structure. The structure reveals that the MBP and TEM-1 domains are in close proximity connected via two linkers and a zinc ion bridging both domains. By bridging both TEM-1 and MBP, Zn2+ acts to “twist tie” the linkers thereby partially dislodging a linker between the two domains from its original catalytically productive position in TEM-1. This linker 1 contains residues normally part of the TEM-1 active site including the critical β3 and β4 strands important for activity. Mutagenesis of residues comprising the crystallographically observed Zn2+ site only slightly affected Zn2+ inhibition 2- to 4-fold. Combined with previous mutagenesis results we therefore hypothesize the presence of two or more inter-domain mutually exclusive inhibitory Zn2+ sites. Mutagenesis and molecular modeling of an intact TEM-1 domain near MBP within the RG13 framework indicated a close surface proximity of the two domains with maltose switching being critically dependent on MBP linker anchoring residues and linker length. Structural analysis indicated that the linker attachment sites on MBP are at a site that, upon maltose binding, harbors both the largest local Cα distance changes and displays surface curvature changes, from concave to relatively flat becoming thus less sterically intrusive. Maltose activation and zinc inhibition of RG13 are hypothesized to have opposite effects on productive relaxation of the TEM-1 β3 linker region via steric and/or linker juxtapositioning mechanisms