119 research outputs found
Laser Diode Induced Lighting Modules
Laser diodes have the potential of becoming the light engines of future lighting technology since they have negligible efficiency droop factor, unlike light emitting diodes. This study demonstrates the possibility of laser diodes coupled to phosphor targets being used as a solid state lighting system with high power applications. It was revealed that white light emitting modules with efficiency of up to 217 lumens per watt based on laser diodes can currently be made and upon further development of laser diode technology and relevant phosphor materials there is room for further improvements. The report also demonstrates the ability of this technology to produce a tailored emission spectrum for a given specific requirement. Two test lamp prototypes were made using laser diodes and phosphor targets and their emission characteristics were investigatedBrunel University London & EPSRC grant No. EP/K504208/
Evaluation of thermally stable phosphor screens for application in laser diode excited high brightness white light modules
A study on the preparation of thermally stable phosphor targets based on yttrium aluminum garnet doped with cerium (YAG:Ce) when excited by a high power laser diode is described. The luminous flux, chromaticity and radial spectral flux of the targets along with their thermal stability have been determined when exposed to laser powers of up to 5000 mW. This report presents successful high brightness light sources with adjustable emission properties achieved by utilizing thermally stable phosphor targets excited by high power laser diodes.Brunel University London, No. EP/K504208/
Investigating the emission characteristics of single crystal YAG when activated by high power laser beams
© The Author(s) 2016. Limitations associated with light emitting diodes (LEDs) operating under high current densities due to the efficiency droop has created a need to look for alternative light sources; here we report investigations on the potential of laser diodes (LDs) for high brightness lighting solutions. High power laser diodes require phosphor targets with certain performance criteria such as high thermal conductivity, efficiency and structural geometry. Here we examine the possibility of using single crystal YAG:Ce phosphor materials as potential targets for generation of light via laser diodes. We report on the emission properties of the crystals with different sizes and examine the effect of laser beam incident angle incident on crystal target emission
Development of high temperature, radiation hard detectors based on diamond
© 2016 Single crystal CVD diamond has many desirable properties compared to current, well developed, detector materials; exceptional radiation, chemical and physical hardness, chemical inertness, low Z (close to human tissue, good for dosimetry), wide bandgap and an intrinsic pathway to fast neutron detection through the 12C(n,α)9Be reaction. However effective exploitation of these properties requires development of a suitable metallisation scheme to give stable contacts for high temperature applications. To best utilise available processing techniques to optimise sensor response through geometry and conversion media configurations, a reliable model is required. This must assess the performance in terms of spectral response and overall efficiency as a function of detector and converter geometry. The same is also required for proper interpretation of experimental data. Sensors have been fabricated with varying metallisation schemes indented to permit high temperature operation; Present test results indicate that viable fabrication schemes for high temperature contacts have been developed and present modelling results, supported by preliminary data from partners indicate simulations provide a useful representation of response
A benchmark activity on the fatigue life assessment of AlSi10Mg components manufactured by L-PBF
One of the challenges associated with additive manufacturing (AM) is the definition of an assessment route which considers the main process signatures of the AM process. To this end, this work presents a complete benchmark activity for the assessment of an AlSi10Mg component produced by a laser pow- der bed fusion process, aimed at advancing the understanding of the fatigue resistance of AM materials with particular focus on the comparison between the fatigue performances of small coupons and demon- strators. Four builds of AlSi10Mg specimen geometries were manufactured to: (i) determine the fatigue curves for both as-built and machined conditions; (ii) measure the fatigue crack growth rate; (iii) produce and test under fatigue a benchmark component used as a reference for the validation of the fatigue assessment procedure. Tools and concepts of flaw tolerance were then used to perform the fatigue assess- ment of the benchmark component and were shown to be successful in the life prediction. Results obtained from this wide database (related to internal defects and surface features) show that only a fracture-based fatigue assessment is able to provide precise life estimates consistent with material crack growth properties. Eventually, all the experimental results including specimens design, analysis of frac- ture surfaces and raw tests’ data will be made available in a database which can be accessed and used by the industrial and scientific communities to calibrate and validate alternative fatigue assessment proce- dures of AM parts
Production of recombinant CAMP – Sialidase protein and preparation of chitosan nanoparticles carrying this protein to be used as a candidate for vaccines targeting Propionibacterium acnes
BACKGROUND AND OBJECTIVE: Acne vulgaris is one of the most common skin diseases that imposes too much mental pressure and high costs on patients. The existing treatments have low efficacy and include antibiotics and anti-inflammatory drugs, which have many complications due to the chronic nature of the disease, especially at young age, including antibiotic resistance and allergic reactions. For this reason, one of the new therapeutic approaches is the use of a vaccine with the help of the bacterium or its components. The aim of this study is to produce nanoparticles carrying the recombinant CAMP – Sialidase protein as a new chimeric antigen to be used in acne vaccine.
METHODS:To express the recombinant CAMP – Sialidase protein, E. coli BL21 DE3 was used as the host. Purification of protein was done through combined urea/imidazole method and using a nickel-nitroacetic acid column. The recombinant protein was confirmed using Western Blotting by Anti – Histidine Antibody. Then, the loaded nanoparticles were prepared by recombinant protein using ionic gelation technique and tripolyphosphate. Finally, the size and zeta potential of the nanoparticles were determined by the DLS device.
FINDINGS: The recombinant CAMP – Sialidase protein was confirmed after expression and purification. The size and zeta potential of nanoparticles containing recombinant CAMP – Sialidase protein at a concentration of 0.6 mg / ml were determined to be 80 nm and +27 mV, respectively, using the DLS device. The loading rate of the protein in the nanoparticles was found to be 88%.
CONCLUSION: The results show that the recombinant protein is expressed completely and is successfully encapsulated in the chitosan nanoparticles
Multicolour correlative imaging using phosphor probes
Correlative light and electron microscopy exploits the advantages of optical methods, such as multicolour probes and their use in hydrated live biological samples, to locate functional units, which are then correlated with structural details that can be revealed by the superior resolution of electron microscopes. One difficulty is locating the area imaged by the electron beam in the much larger optical field of view. Multifunctional probes that can be imaged in both modalities and thus register the two images are required. Phosphor materials give cathodoluminescence (CL) optical emissions under electron excitation. Lanthanum phosphate containing thulium or terbium or europium emits narrow bands in the blue, green and red regions of the CL spectrum; they may be synthesised with very uniform-sized crystals in the 10- to 50-nm range. Such crystals can be imaged by CL in the electron microscope, at resolutions limited by the particle size, and with colour discrimination to identify different probes. These materials also give emissions in the optical microscope, by
multiphoton excitation. They have been deposited on the surface of glioblastoma cells and imaged by CL. Gadolinium oxysulphide doped with terbium emits green photons by either ultraviolet or electron excitation. Sixty-nanometre crystals of this phosphor have been imaged in the atmospheric scanning electron microscope (JEOL ClairScope). This probe and microscope combination allow correlative imaging in hydrated samples. Phosphor probes should prove to be very useful in correlative light and electron microscopy, as fiducial
markers to assist in image registration, and in high/super resolution imaging studies
- …