Solvent-dependent on/off valving using selectively permeable barriers in paper microfluidics

We report on a new way to control solvent flows in paper microfluidic devices, based on the local patterning of paper with alkyl ketene dimer (AKD) to form barriers with selective permeability for different solvents. Production of the devices is a two-step process. In the first step, AKD-treated paper (hydrophobic) is exposed to oxygen plasma for re-hydrophilization. 3D-printed masks are employed to shield certain areas of this paper to preserve well-defined hydrophobic patterns. In the second step, concentrated AKD in hexane is selectively deposited onto already hydrophobic regions of the paper to locally increase the degree of hydrophobicity. Hydrophilic areas formed in the previous oxygen plasma step are protected from AKD by wetting them with water first to prevent the AKD hexane solution from entering them (hydrophilic exclusion). Characterization of the patterns after both steps shows that reproducible patterns are obtained with linear dependence on the dimensions of the 3D-printed masks. This two-step methodology leads to differential hydrophobicity on the paper: (i) hydrophilic regions, (ii) low-load AKD gates, and (iii) high-load AKD walls. The gates are impermeable to water, yet can be penetrated by most alcohol/water mixtures; the walls cannot. This concept for solvent-dependent on/off valving is demonstrated in two applications. In the first example, a device was developed for multi-step chemical reactions. Different compounds can be spotted separately (closed gates). Upon elution with an alcohol/water mixture, the gates become permeable and the contents are combined. In the second example, volume-defined sampling is introduced. Aqueous sample is allowed to wick into a device and fill a sample chamber. The contents of this sample chamber are eluted perpendicularly with an alcohol/water mixture through a selectively permeable gate. This system was tested with dye solution, and a linear dependence of magnitude of the signal on the sample chamber size was obtained

Boronate affinity paper spray mass spectrometry for determination of elevated levels of catecholamines in urine

The analysis of catecholamines, such as dopamine, epinephrine and norepinephrine in urine can be used in the diagnosis of certain pathologies, such as hormone-producing tumors. Here, a fast and simple quantitative boronate affinity paper spray tandem mass spectrometric (PS-MS/MS) method is established, which can improve selectivity and reduce ion suppression without needing any instrumental chromatography. We use here the property of boronic acids, which can selectively bind ortho-diol-containing compounds under alkaline conditions. Paper tip modification and catechol enrichment protocols were developed to selectively bind, clean up and subsequently desorb such catecholamines. Standard catecholamine solutions, as well as human urine samples were analyzed with the PS-MS(/MS) method, which is fast, cheap and easy-to-operate compared to HPLC-MS/MS. Despite its high simplicity, boronate affinity PS-MS/MS exhibits good performance compared to HPLC-MS/MS in human urine analysis in terms of precision (2.1%–7.2% vs. 1.1%–2.9%) and accuracy (−10.2%–9.3% vs. −4.8%–5.1%), and a physiologically relevant limit of detection (0.027–0.12 μg mL−1). The boronate affinity PS-MS/MS clearly achieved the detection limits that would allow the fast analysis of urine samples for clinical purposes, such as screening for pheochromocytoma (exceeding 0.5 μg mL−1)

Rapid distinction and semiquantitative analysis of THC and CBD by silver-impregnated paper spray mass spectrometry

The control over the amount of psychoactive THC (Δ-9-tetrahydrocannabinol) in commercial cannabidiol (CBD) products has to be strict. A fast and simple semiquantitative Ag(I)-impregnated paper spray mass spectrometric method for differentiating between THC and CBD, which show no difference in standard single-stage or tandem MS, was established. Because of a different binding affinity to Ag(I) ions, quasi-molecular Ag(I) adducts [THC + Ag]+ and [CBD + Ag]+ at m/z 421 and 423 give different fragmentation patterns. The product ions at m/z 313 for THC and m/z 353 and 355 for CBD can be used to distinguish THC and CBD and to determine their ratio. Quantification of THC/CBD ratios in commercial CBD oils was accomplished with a low matrix effect (−2.2 ± 0.4% for THC and −2.0 ± 0.3% for CBD). After simple methanol extraction (recovery of 87.3 ± 1.2% for THC and 92.3 ± 1.4% for CBD), Ag(I)-impregnated paper spray analysis was employed to determine this ratio. A single run can be completed in a few minutes. This method was benchmarked against the UHPLC-UV method. Ag(I)-impregnated paper spray MS had the same working range (THC/CBD = 0.001–1) as UHPLC-UV analysis (R2 = 0.9896 and R2 = 0.9998, respectively), as well as comparable accuracy (−2.7 to 14%) and precision (RSD 1.7–11%). The method was further validated by the analysis of 10 commercial oils by Ag(I)-impregnated paper spray MS and UHPLC-UV analysis. Based on the determined relative concentration ratios of THC/CBD and the declared CBD concentration, 6 out of 10 CBD oils appear to contain more THC than the Dutch legal limit of 0.05%