1,514 research outputs found

    X-Shooting ULLYSES: Massive stars at low metallicity. III. Terminal wind speeds of ULLYSES massive stars

    Full text link
    The winds of massive stars have an impact on stellar evolution and on the surrounding medium. The maximum speed reached by these outflows, the terminal wind speed, is a global wind parameter and an essential input for models of stellar atmospheres and feedback. With the arrival of the ULLYSES programme, a legacy UV spectroscopic survey with HST, we have the opportunity to quantify the wind speeds of massive stars at sub-solar metallicity (in the Large and Small Magellanic Clouds, 0.5Z and 0.2Z) at an unprecedented scale. We empirically quantify the wind speeds of a large sample of OB stars, including supergiants, giants, and dwarfs at sub-solar metallicity. Using these measurements, we investigate trends of terminal wind speed with a number of fundamental stellar parameters, namely effective temperature, metallicity, and surface escape velocity. We empirically determined the terminal wind speed for a sample of 149 OB stars in the Magellanic Clouds either by directly measuring the maximum velocity shift of the absorption component of the Civ 1548-1550 line profile, or by fitting synthetic spectra produced using the Sobolev with exact integration method. Stellar parameters were either collected from the literature, obtained using spectral-type calibrations, or predicted from evolutionary models. We find strong trends of terminal wind speed with effective temperature and surface escape speed when the wind is strong enough to cause a saturated P Cygni profile in Civ 1548-1550. We find evidence for a metallicity dependence on the terminal wind speed proportional to Z^0.22+-0.03 when we compared our results to previous Galactic studies. Our results suggest that effective temperature rather than surface escape speed should be used as a straightforward empirical prediction of terminal wind speed and that the observed metallicity dependence is steeper than suggested by earlier works.Comment: 21 pages, 16 figures, 8 tables. Accepted in A&

    Characteristics of Non-typhoidal Salmonella Isolates from Human and Broiler-chickens in Southwestern Seoul, Korea

    Get PDF
    Non-typhoidal Salmonella (NTS) is an important commensal microorganism. The purpose of this study was to determine the epidemiological relation between NTS isolates from livestock and NTS isolates from human by analyzing antimicrobial susceptibilities and performing molecular typing. We determined the serotypes of 36 human clinical isolates and 64 livestock isolates, performed antimicrobial susceptibility testing against 8 antibiotics, and determined the molecular types of isolated NTS spp. by pulsed field gel electrophoresis (PFGE). In human isolates, S. enteritidis was the most common serotype (17 isolates; 47.2%) and S. typhimurium the second most (8 isolates; 22.2%). In livestock isolates, S. typhimurium was the most common serotype (15 isolates; 23.44%), and S. enteritidis was the second most (14 isolates; 21.88%). Ampicillin and tetracycline resistance were 50% (32/64 isolates) each among broiler-chicken NTS isolates. No human or livestock NTS isolates showed resistance to ciprofloxacin, TMP-SMX, or ceftriaxone. However, 19.4% (7/36) and 46.8% (30/64) of the human and livestock NTS isolates were resistant to nalidixic acid (MIC ≥16 mg/mL), respectively. The presence of the three identical PFGE molecular types from human and broiler-chicken NTS isolates suggests the possibility of transmission from livestock to humans

    SINE indel polymorphism of AGL gene and association with growth and carcass traits in Landrace × Jeju black pig F2 population

    Get PDF
    Genetic polymorphisms in the glycogen debrancher enzyme (AGL) gene were assessed with regard to their association with growth and carcass traits in the F2 population crossbred Landrace and Jeju (Korea) Black pig. Three genotypes representing the insertion and/or deletion (indel) polymorphisms of short interspersed nuclear element were detected at frequencies of 0.278 (L/L), 0.479 (L/S), and 0.243 (S/S), respectively. The AGL S allele-containing pigs evidenced significantly heavier body weights at birth, the 3rd week, 10th week, and 20th week during developmental stages and higher average daily gains during the late period than were noted in the L/L homozygous pigs (P < 0.05), respectively. However, average daily gains during the early period were not significantly associated with genotype distribution (P > 0.05). With regard to the carcass traits, the S allele pigs (S/-) evidenced significantly heavier carcass weights and thicker backfat than was measured in L/L homozygous pigs (P < 0.05). However, body lengths, meat color, and marbling scores were all found not to be statistically significant (P > 0.05). Consequently, the faster growth rate during the late period and backfat deposition rather than intramuscular fat deposition cause differences in pig productivity according to genotypes of the AGL gene. These findings indicate that the AGL genotypes may prove to be useful genetic markers for the improvement of Jeju Black pig-related crossbreeding systems

    Family history of colorectal cancer in Iran

    Get PDF
    BACKGROUND: Previous reports show a high proportion of young CRC patients in Iran. In this study we aim to look for the clustering of colorectal cancer in families of a series of CRC patients from Iran. METHODS: The family history of cancer is traced in 449 CRC patients of which 112 were 45 yrs or younger and 337 were older than 45 yrs at time of diagnosis. The patients were admitted in two hospitals in Tehran, during a 4-year period. RESULTS: Clinical diagnosis of HNPCC was established in 21 (4.7%) probands. Family history of CRC was more frequently reported by early-onset than by late-onset patients (29.5% vs. 12.8%, p < 0.001). Distribution of tumor site differed significantly between those with and without family history of CRC. Right colon cancer was the most frequent site (23/45, 35.4%) observed in patients with positive family history of colorectal cancer. CONCLUSION: The relatively high frequency of CRC clustering along with HNPCC in our patients should be further confirmed with larger sample size population-based and genetic studies to establish a cost effective molecular screening for the future

    Asbestos-related pleural and lung fibrosis in patients with retroperitoneal fibrosis

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Retroperitoneal fibrosis (RPF) is a rare fibroinflammatory disease that leads to hydronephrosis and renal failure. In a case-control study, we have recently shown that asbestos exposure was the most important risk factor for RPF in the Finnish population. The aim of this study was to evaluate the relation of asbestos exposure to radiologically confirmed lung and pleural fibrosis among patients with RPF.</p> <p>Methods</p> <p>Chest high-resolution computed tomography (HRCT) was performed on 16 unexposed and 22 asbestos-exposed RPF patients and 18 asbestos-exposed controls. Parietal pleural plaques (PPP), diffuse pleural thickening (DPT) and parenchymal fibrosis were scored separately.</p> <p>Results</p> <p>Most of the asbestos-exposed RPF patients and half of the asbestos-exposed controls had bilateral PPP, but only a few had lung fibrosis. Minor bilateral plaques were detected in two of the unexposed RPF patients, and none had lung fibrosis. DPT was most frequent and thickest in the asbestos-exposed RPF-patients. In three asbestos-exposed patients with RPF we observed exceptionally large pleural masses that were located anteriorly in the pleural space and continued into the anterior mediastinum.</p> <p>Asbestos exposure was associated with DPT in comparisons between RPF patients and controls (case-control analysis) as well as among RPF patients (case-case analysis).</p> <p>Conclusion</p> <p>The most distinctive feature of the asbestos-exposed RPF patients was a thick DPT. An asbestos-related pleural finding was common in the asbestos-exposed RPF patients, but only a few of these patients had parenchymal lung fibrosis. RPF without asbestos exposure was not associated with pleural or lung fibrosis. The findings suggest a shared etiology for RPF and pleural fibrosis and furthermore possibly a similar pathogenetic mechanisms.</p

    Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

    Get PDF
    The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

    Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

    Get PDF
    This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}andcorrespondtoanintegratedluminosityof and correspond to an integrated luminosity of 4.6\;{\rm f}{{{\rm b}}^{-1}}.ThemeasurementisperformedbyreconstructingtheboostedWorZbosonsinsinglejets.ThereconstructedjetmassisusedtoidentifytheWandZbosons,andajetsubstructuremethodbasedonenergyclusterinformationinthejetcentreofmassframeisusedtosuppressthelargemultijetbackground.ThecrosssectionforeventswithahadronicallydecayingWorZboson,withtransversemomentum. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum {{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}andpseudorapidity and pseudorapidity |\eta |\lt 1.9,ismeasuredtobe, is measured to be {{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques

    Observation of associated near-side and away-side long-range correlations in √sNN=5.02  TeV proton-lead collisions with the ATLAS detector

    Get PDF
    Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT

    Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

    Get PDF
    The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

    Search for the neutral Higgs bosons of the minimal supersymmetric standard model in pp collisions at root s=7 TeV with the ATLAS detector

    Get PDF
    A search for neutral Higgs bosons of the Minimal Supersymmetric Standard Model (MSSM) is reported. The analysis is based on a sample of proton-proton collisions at a centre-of-mass energy of 7TeV recorded with the ATLAS detector at the Large Hadron Collider. The data were recorded in 2011 and correspond to an integrated luminosity of 4.7 fb-1 to 4.8 fb-1. Higgs boson decays into oppositely-charged muon or τ lepton pairs are considered for final states requiring either the presence or absence of b-jets. No statistically significant excess over the expected background is observed and exclusion limits at the 95% confidence level are derived. The exclusion limits are for the production cross-section of a generic neutral Higgs boson, φ, as a function of the Higgs boson mass and for h/A/H production in the MSSM as a function of the parameters mA and tan β in the mhmax scenario for mA in the range of 90GeV to 500 GeV. Copyright CERN
    corecore