Mechanical issues of FIREX target under cryogenic environment

A typical FIREX target is assembled with a 500 ?m diameter PS shell, a glass fill tube and a gold cone guide. Each part is glued together by an epoxy resin. To date, several assembled targets have been cooled down to cryogenic environment. However, they could not survive a cool down process and appeared to rupture around the glued boundary between the PS shell and cone guide. To reveal a crucial factor of the target destruction, its thermal stress after cool down was calculated using the ANSYS code. A two dimensional axisymmetric calculation model is composed of the PS shell and cone guide glued by an epoxy resin which is covered on by an epoxy fillet. A cool down process from 293 K to 10 K was simulated. The calculation showed that the rupture of the shell would start from the PS shell and gold cone guide boundary and the target validity depended on how the epoxy fillet could reinforce the PS shell

Beneficial effect of donor-specific blood transfusions (DST) on living-related kidney allograft survival.

The survival rate of 19 patients who underwent living-related kidney transplantation after donor-specific blood transfusions (DST) was compared with that of 32 historical controls receiving transplants without DST. The graft survival rate of the DST group was 82% after two and three years. The graft survival rate of the DST group was significantly better than the 53% rate after two years obtained with the 32 historical controls (p less than 0.05). We tested sera from 16 DST-treated recipients to study the beneficial effect of DST on kidney allograft survival using the mixed lymphocyte culture (MLC) serum inhibition test. The results demonstrated that MLC inhibitory factors were induced in the serum of the recipient after completion of DST. This inhibition of MLC was observed by treatment of responder lymphocytes with serum obtained three weeks after DST plus rabbit complement. The inhibitory effect was also specific for responder cells in anti-donor MLC. Regarding the correlation with rejection episodes, these MLC inhibitory factors were often observed in the non-rejection group (p less than 0.05). The data suggest that such factors may be anti-idiotypic antibodies and be associated with prolonged graft survival.</p

Immunotherapy by a Slow Delivery System of Interleukin-2 in Mice Model

A sustained release system for interleukin-2 (IL-2), and IL-2 mini-pellet (IL-2 mp), was developed by fusing IL-2 into a needle shaped collagen. Serum concentration of IL-2 after a single subcutaneous injection of the IL-2 mp into C57BL/6 mice remained elevated longer than after an injection of aqueous IL-2. IL-2 in the serum became undetectable by 6h after a subcutaneous injection of 1 x 10(6) unit of IL-2 in phosphate-buffered saline (PBS). In contrast, after a single subcutaneous injection of IL-2 mp containing the same amount of IL-2, the concentration of IL-2 increased to its maximum at 6h after injection, then began to decrease gradually. IL-2 was detected even on the third day after a single subcutaneous injection of one IL-2 mp. Augmentation of NK activity and generation of IL-2 activated killer cells were observed in the spleen from day 1--day 3 after a single subcutaneous injection of IL-2 mp into C57BL/6 mice. This activation was not observed following a single subcutaneous injection of the same amount of IL-2 in PBS. Adoptive immunotherapy by a single subcutaneous injection of IL-2 mp followed by intravenous injections of in vitro cultured IL-2 activated killer cells showed better results in decreasing the number of metastases of Lewis lung carcinoma in C57BL/6 mice than immunotherapy using IL-2 solution.(ABSTRACT TRUNCATED AT 250 WORDS)</p

Magnetized Fast Isochoric Laser Heating for Efficient Creation of Ultra-High-Energy-Density States

The quest for the inertial confinement fusion (ICF) ignition is a grand challenge, as exemplified by extraordinary large laser facilities. Fast isochoric heating of a pre-compressed plasma core with a high-intensity short-pulse laser is an attractive and alternative approach to create ultra-high-energy-density states like those found in ICF ignition sparks. This avoids the ignition quench caused by the hot spark mixing with the surrounding cold fuel, which is the crucial problem of the currently pursued ignition scheme. High-intensity lasers efficiently produce relativistic electron beams (REB). A part of the REB kinetic energy is deposited in the core, and then the heated region becomes the hot spark to trigger the ignition. However, only a small portion of the REB collides with the core because of its large divergence. Here we have demonstrated enhanced laser-to-core energy coupling with the magnetized fast isochoric heating. The method employs a kilo-tesla-level magnetic field that is applied to the transport region from the REB generation point to the core which results in guiding the REB along the magnetic field lines to the core. 7.7 $\pm$ 1.3 % of the maximum coupling was achieved even with a relatively small radial area density core ($\rho R$ $\sim$ 0.1 g/cm$^2$). The guided REB transport was clearly visualized in a pre-compressed core by using Cu-$K_\alpha$ imaging technique. A simplified model coupled with the comprehensive diagnostics yields 6.2\% of the coupling that agrees fairly with the measured coupling. This model also reveals that an ignition-scale areal density core ($\rho R$ $\sim$ 0.4 g/cm$^2$) leads to much higher laser-to-core coupling ($>$ 15%), this is much higher than that achieved by the current scheme

Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments

In high-energy-density physics, including inertial fusion energy using high-power lasers, doping tracer atoms and deuteration of target materials play an important role in diagnosis. For example, a low-concentration Cu dopant acts as an x-ray source for electron temperature detection while a deuterium dopant acts as a neutron source for fusion reaction detection. However, the simultaneous achievement of Cu doping, a deuterated polymer, mechanical toughness and chemical robustness during the fabrication process is not so simple. In this study, we report the successful fabrication of a Cu-doped deuterated target. The obtained samples were characterized by inductively coupled plasma optical emission spectrometry, differential scanning calorimetry and Fourier transform infrared spectroscopy. Simultaneous measurements of Cu K-shell x-ray emission and beam fusion neutrons were demonstrated using a petawatt laser at Osaka University.Ikeda T., Kaneyasu Y., Hosokawa H., et al. Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments. Nuclear Fusion 63, 016010 (2023); https://doi.org/10.1088/1741-4326/aca2ba

The Japanese space gravitational wave antenna; DECIGO

DECi-hertz Interferometer Gravitational wave Observatory (DECIGO) is the future Japanese space gravitational wave antenna. DECIGO is expected to open a new window of observation for gravitational wave astronomy especially between 0.1 Hz and 10 Hz, revealing various mysteries of the universe such as dark energy, formation mechanism of supermassive black holes, and inflation of the universe. The pre-conceptual design of DECIGO consists of three drag-free spacecraft, whose relative displacements are measured by a differential Fabry– Perot Michelson interferometer. We plan to launch two missions, DECIGO pathfinder and pre- DECIGO first and finally DECIGO in 2024

DECIGO pathfinder

DECIGO pathfinder (DPF) is a milestone satellite mission for DECIGO (DECi-hertz Interferometer Gravitational wave Observatory) which is a future space gravitational wave antenna. DECIGO is expected to provide us fruitful insights into the universe, in particular about dark energy, a formation mechanism of supermassive black holes, and the inflation of the universe. Since DECIGO will be an extremely large mission which will formed by three drag-free spacecraft with 1000m separation, it is significant to gain the technical feasibility of DECIGO before its planned launch in 2024. Thus, we are planning to launch two milestone missions: DPF and pre-DECIGO. The conceptual design and current status of the first milestone mission, DPF, are reviewed in this article

Demonstration of a spherical plasma mirror for the counter-propagating kilojoule-class petawatt LFEX laser system

A counter-propagating laser-beam platform using a spherical plasma mirror was developed for the kilojoule-class petawatt LFEX laser. The temporal and spatial overlaps of the incoming and redirected beams were measured with an optical interferometer and an x-ray pinhole camera. The plasma mirror performance was evaluated by measuring fast electrons, ions, and neutrons generated in the counter-propagating laser interaction with a Cu-doped deuterated film on both sides. The reflectivity and peak intensity were estimated as ∼50% and ∼5 × 1018 W/cm2, respectively. The platform could enable studies of counter-streaming charged particles in high-energy-density plasmas for fundamental and inertial confinement fusion research.Kojima S., Abe Y., Miura E., et al. Demonstration of a spherical plasma mirror for the counter-propagating kilojoule-class petawatt LFEX laser system. Optics Express 30, 43491 (2022); https://doi.org/10.1364/oe.475945