Local temperature in quantum thermal states

We consider blocks of quantum spins in a chain at thermal equilibrium, focusing on their properties from a thermodynamical perspective. Whereas in classical systems the temperature behaves as an intensive magnitude, a deviation from this behavior is expected in quantum systems. In particular, we see that under some conditions the description of the blocks as thermal states with the same global temperature as the whole chain fails. We analyze this issue by employing the quantum fidelity as a figure of merit, singling out in detail the departure from the classical behavior. The influence in this sense of zero-temperature quantum phase transitions can be clearly observed within this approach. Then we show that the blocks can be considered indeed as thermal states with a high fidelity, provided an effective local temperature is properly identified. Such a result originates from typical properties of reduced sub-systems of energy-constrained Hilbert spaces. Finally, the relation between local and global temperature is analyzed as a function of the size of the blocks and the system parameters.Comment: 10 pages, 10 figures. New fidelity measure with similar result

A Rare Case of an Intramedullary Metastasis of a Myxopapillary Ependymoma

Background: Myxopapillary ependimoma (MPE) is a benign slow-growing tumor, and it has been designated histologically as a Grade I neoplasm according to the 2016 World Health Organization classification. Despite the benign character, dissemination and metastasis have occasionally been reported. The retrograde dissemination to other levels of the neuraxis is extremely rare, being more frequent to the intracranial compartment. Case description: We hereby present a case of medullary metastasis of cauda equina MPE, with a history of having undergone a subtotal resection and postoperative adjuvant radiotherapy. The patient presents complaints of night dorsal pain attributable to intradural metastasis twenty-one years after the first surgical intervention. Conclusion: The case reported highlights the importance of long follow-up in patients with MPE, since the possibility of secondary seeding to distant craniospinal sites or local spinal sites after surgery, and radiotherapy should be considered in metastatic disease.info:eu-repo/semantics/publishedVersio

The built environment as determinant of childhood obesity: a systematic literature review

We evaluated the epidemiological evidence on the built environment and its link to childhood obesity, focusing on environmental factors such as traffic noise and air pollution, as well as physical factors potentially driving obesity-related behaviours, such as neighbourhood walkability and availability and accessibility of parks and playgrounds. Eligible studies were i) conducted on human children below the age of 18 years, ii) focused on body size measurements in childhood, iii) examined at least one built environment characteristic, iv) reported effect sizes and associated confidence intervals, and v) were published in English language. A z-Test, as alternative to the meta-analysis, was used to quantify associations due to heterogeneity in exposure and outcome definition. We found strong evidence for an association of traffic-related air pollution (nitrogen dioxide and nitrogen oxides exposure; p<0.001) and built environment characteristics supportive of walking (street intersection density; p<0.01 and access to parks; p<0.001) with childhood obesity. We identified a lack of studies which account for interactions between different built environment exposures or verify the role and mechanism of important effect modifiers such as age

Phantom membrane microfluidic cross-flow filtration device for the direct optical detection of water pollutants

The diffusion of autonomous sensing platforms capable of a remote large-scale surveillance of environmental water basins is currently limited by the cost and complexity of standard analytical methods. In order to create a new generation of water analysis systems suitable for continuous monitoring of a large number of sites, novel technical solutions for fluid handling and detection are needed. Here we present a microfluidic device hosting a perfluorinated microporous membrane with refractive index similar to that of water, which enables the combination of filtration and label-free sensing of adsorbing substances, mainly pollutants, in environmental water samples. The cross-flow design of the microfluidic device avoids the clogging of the membrane due to particulate, whereas molecules with some hydrophobic moiety contained in the crossing flow are partially retained and their adhesion on the inner surface of the membrane yields an increase of light scattering intensity, which can be easily measured using a simple instrument based on Light Emitting Diode illumination. By cycling sample water and pure water as a reference, we demonstrate the detection of 0.5 \uce\ubcM of a model cationic surfactant and regeneration of the sensing surface. The optical response of the membrane sensor was characterized using a simple theoretical model that enables to quantify the concentration of target molecules from the amplitude and kinetics of the measured binding curves. The device was tested with real water samples containing large amount of environmental particles, without showing clogging of the membrane, and enabling nonspecific quantification of adsorbing substances in a few minutes

Variation in Patterns of Metal Accumulation in Thallus Parts of Lessonia trabeculata (Laminariales; Phaeophyceae): Implications for Biomonitoring

Seaweeds are well known to concentrate metals from seawater and have been employed as monitors of metal pollution in coastal waters and estuaries. However, research showing that various intrinsic and extrinsic factors can influence metal accumulation, raises doubts about the basis for using seaweeds in biomonitoring programmes. The thallus of brown seaweeds of the order Laminariales (kelps) is morphologically complex but there is limited information about the variation in metal accumulation between the different parts, which might result in erroneous conclusions being drawn if not accounted for in the biomonitoring protocol. To assess patterns of individual metals in the differentiated parts of the thallus (blade, stipe, holdfast), concentrations of a wide range of essential and non-essential metals (Fe, Cr, Cu, Zn, Mn, Pb, Cd, Ni and Al) were measured in the kelp Lessonia trabeculata. Seaweeds were collected from three sampling stations located at 5, 30 and 60 m from an illegal sewage outfall close to Ventanas, Chile and from a pristine location at Faro Curaumilla. For the majority of metals the highest concentrations in bottom sediment and seaweed samples were found at the site closest to the outfall, with concentrations decreasing with distance from the outfall and at control stations; the exception was Cd, concentrations of which were higher at control stations. The patterns of metal concentrations in different thallus parts were metal specific and independent of sampling station. These results and the available literature suggest that biomonitoring of metals using seaweeds must take account of differences in the accumulation of metals in thallus parts of complex seaweedsComment: Research articl

Numerical Simulation of Siphon Breaker of an Open-Pool Type Research Reactor

A numerical investigation of the siphon breaker of an open-pool type nuclear research reactorwas performed by Computational Fluid Dynamics. The computational model was assessed by solving a siphon break line design, for which experimental and numerical data are available. The multiphaseproblem was solved with Volume of Fluid Method and k-epsilon for turbulence modeling. Numerical results were in very good agreement with experimental data. The siphon breaker occurrence was verified and the undershooting height, measured from the pool level to the siphon break line end as well as the liquid mass flow rate inside the main pipe were well captured. The implemented model showed to bereliable for assessing this kind of passive safety systems.Publicado en: Mecánica Computacional vol. XXXV no.31Facultad de Ingenierí