Effects of Raschig Ring Packing Patterns on Pressure Drop, Heat Transfer, Methane Conversion, and Coke Deposition on a Semi-pilot-scale Packed Bed Reformer

The effects of Raschig ring packing patterns on the efficiency of dry methane reforming reactions were investigated using computational fluid dynamics (CFD). The present study aims to understand the behavior of fluid flow in packed bed reactors, especially under low reactor-to-ring ratios between 4 and 8. Three packing patterns were studied: vertical staggered (VS), chessboard staggered (CS), and reciprocal staggered (RS). It was determined that packing pattern notably affected pressure drop across the reactor length. The VS pattern produced the lowest pressure drop of 223 mPa, while the CS and RS patterns produced pressure drops of 228 mPa and 308 mPa, respectively. The values of methane conversion can be increased by ca. 2 % by selecting a more suitable packing pattern (i.e., 76 % for the VS pattern and 74 % for the CS and RS patterns). This work is licensed under a Creative Commons Attribution 4.0 International License

The Effect of Preparation Method on Ni/Ce/Al Catalyst for High Temperature Water-Gas Shift Reaction

High temperature water gas shift (HT-WGS) is an important catalytic process connected with reforming process in hydrogen production. Ni/CeO2-Al2O3 (or Al2O3) catalysts were studied in this work on the effect of catalyst preparation method toward the physicochemical properties and the HT-WGS activity. Ni/CeO2-Al2O3 were prepared by sol-gel and impregnation methods whereas Ni/Al2O3 was prepared by impregnation method. The catalyst samples were characterized by XRD, H2-TPR and H2-TPD techniques. The catalytic activities of HT-WGS catalysts was demonstrated at 550°C, GHSV of 2x105 mLh-1gcat-1and steam-to-CO ratio of 3. Nickel was detected as a nickel aluminate phase in the calcined catalyst. Ni strongly interacted with support in the calcined catalyst prepared by sol-gel method. The strong metal-support interaction can be resisted by preparing catalyst via impregnation and CeO2 can promote the H2O dissociation in HT-WGS mechanism. The highest metal dispersion, largest metal surface area and greatest HT-WGS activity were consequently achieved by Ni/CeO2-Al2O3 prepared from impregnation method

The Effects of CeO2 and Co Doping on the Properties and the Performance of the Ni/Al2O3-MgO Catalyst for the Combined Steam and CO2 Reforming of Methane Using Ultra-Low Steam to Carbon Ratio

In this paper, the 10 wt% Ni/Al2O3-MgO (10Ni/MA), 5 wt% Ni-5 wt% Ce/Al2O3-MgO (5Ni5Ce/MA), and 5 wt% Ni-5 wt% Co/Al2O3-MgO (5Ni5Co/MA) catalysts were prepared by an impregnation method. The effects of CeO2 and Co doping on the physicochemical properties of the Ni/Al2O3-MgO catalyst were comprehensively studied by N2 adsorption-desorption, X-ray diffraction (XRD), transmission electron microscopy (TEM), H2 temperature programmed reduction (H2-TPR), CO2 temperature programmed reduction (CO2-TPD), and thermogravimetric analysis (TGA). The effects on catalytic performance for the combined steam and CO2 reforming of methane with the low steam-to-carbon ratio (S/C ratio) were evaluated at 620 °C under atmospheric pressure. The appearance of CeO2 and Co enhanced the oxygen species at the surface that decreased the coke deposits from 17% for the Ni/MA catalyst to 11–12% for the 5Ni5Ce/MA and 5Ni5Co/MA catalysts. The oxygen vacancies in the 5Ni5Ce/MA catalyst promoted water activation and dissociation, producing surface oxygen with a relatively high H2/CO ratio (1.6). With the relatively low H2/CO ratio (1.3), the oxygen species at the surface was enhanced by CO2 activation-dissociation via the redox potential in the 5Ni5Co/MA catalyst. The improvement of H2O and CO2 dissociative adsorption allowed the 5Ni5Ce/MA and 5Ni5Co/MA catalysts to resist the carbon formation, requiring only a low amount of steam to be added

Hydroconversion de l'huile de Jatropha : développement de méthodes analytiques

nationa