Influence of Matrix Polarity on the Properties of Ethylene Vinyl Acetate–Carbon Nanofiller Nanocomposites

A series of ethylene vinyl acetate (EVA) nanocomposites using four kinds of EVA with 40, 50, 60, and 70 wt% vinyl acetate (VA) contents and three different carbon-based nanofillers—expanded graphite (EG), multi-walled carbon nanotube (MWCNT), and carbon nanofiber (CNF) have been prepared via solution blending. The influence of the matrix polarity and the nature of nanofillers on the morphology and properties of EVA nanocomposites have been investigated. It is observed that the sample with lowest vinyl acetate content exhibits highest mechanical properties. However, the enhancement in mechanical properties with the incorporation of various nanofillers is the highest for EVA with high VA content. This trend has been followed in both dynamic mechanical properties and thermal conductivity of the nanocomposites. EVA copolymer undergoes a transition from partial to complete amorphousness between 40 and 50 wt% VA content, and this changes the dispersion of the nanofillers. The high VA-containing polymers show more affinity toward fillers due to the large free volume available and allow easy dispersion of nanofillers in the amorphous rubbery phase, as confirmed from the morphological studies. The thermal stability of the nanocomposites is also influenced by the type of nanofiller

Polymer/carbon nanotube nanocomposites: influence of carbon nanotbues on EVA photodegradation

peer reviewedThe influence of carbon nanotubes on the photodegradation of EVA/carbon nanotube nanocomposites was studied by irradiation under photooxidative conditions (at ? > 300 nm, at 60 °C and in the presence of oxygen). The influence of the nanotubes on both the photooxidation mechanism of EVA and the rates of oxidation of the matrix was characterized on the basis of infrared analysis. On one hand, it was shown that the carbon nanotubes act as inner filters and antioxidants, which contribute to reduction in the rate of photooxidation of the polymeric matrix. On the other hand, it was shown that light absorption could provoke an increase in the local temperature and then induce the photooxidation of the polymer. The competition between these three effects determines the global rate of photooxidation of the polymeric matrix. Several factors are involved, the concentration of the carbon nanotubes, the morphology of the nanotubes and the functionalization of the nanotube surface

Poly(hexamethylene terephthalate) layered silicate nanocomposites

peer reviewedNanocomposites of poly(hexamethylene terephthalate) (PHT) and montmorillonite organo-modified with alkylammonium cations bearing two primary hydroxyl functions, i.e., Cloisite® 30B (CL30B) were synthesized. Organoclay incorporation was performed either by dispersion in the PHT matrix via melt blending or by in situ ring-opening polymerization of hexamethylene terephthalate cyclic oligomers c(HT). An additional procedure combining the two methods, preparation of a highly enriched inorganic 'PHT-CL30B' nanohybrid masterbatch by in situ ring-opening polymerization and blending of the masterbatch with additional PHT was explored. The obtained nanocomposites contain 3% (w/w) of inorganics and displayed a mixture of intercalated morphology and exfoliated nanolayers as evidenced by X-ray diffraction and transmission electron microscopy. The nanocomposite obtained by the masterbatch technique exhibited a higher degree of exfoliation and displayed slightly higher glass transition temperatures, better mechanical properties and higher flame resistance. The improved results achieved with the 'masterbatch route' are a consequence of the reactions occurring between the nanocomposite constituents allowing for the grafting of PHT chains onto the organoclay surface