Temperature dependence of the probability of "small heating" and total losses of ucns on the surface of fomblin oils of different molecular mass

We measured the temperature dependence of the probability of small heating and total losses of UCNs on the PFPE Fomblin Y surface with various molecular masses Mw=2800, 3300, 6500 amu in the temperature range of 100-300 K. The probability of small heating sharply decreases with increasing Mw and decreasing temperature. The probability of total loss weakly decreases with decreasing temperature and takes the minimum value at Mw=3300 amu. As this oil provides a homogeneous surface with minimal probabilities of small heating and total losses of UCNs, it is the preferred candidate for experiments on measuring the neutron lifetime

Relationship between acoustic emission and microcrack formation in single crystals of Hadfield steel

Abrasive wear is not favorable for Hadfield steel. The connection between the acoustic emission signal and th

Crystallographic analysis of rock grain orientation at meso- and microscale levels

This paper studies the results of electron backscatter diffraction analysis of naturally deformedpolycrystalline olivine. It also defines the dependence of lattice-preferred orientations of grains on their microstructural position and size. The authors detect the basic mechanisms, consequence and thermal dynamic modes of deformation. They also show that the development of a polycrystalline structure is determined by the following consecutive activation of sliding systems (010)[100] → {0kl}[100] → (100)[010] → {100}[001] → {110}[001], when dislocation sliding and diffusion creep change under the temperature decrease from 1000°C to 650°C

Invariants of pseudogroup actions: Homological methods and Finiteness theorem

We study the equivalence problem of submanifolds with respect to a transitive pseudogroup action. The corresponding differential invariants are determined via formal theory and lead to the notions of k-variants and k-covariants, even in the case of non-integrable pseudogroup. Their calculation is based on the cohomological machinery: We introduce a complex for covariants, define their cohomology and prove the finiteness theorem. This implies the well-known Lie-Tresse theorem about differential invariants. We also generalize this theorem to the case of pseudogroup action on differential equations.Comment: v2: some remarks and references addee

Mechanical aspects of nonhomogeneous deformation of aluminum single crystals under compression along [100] and [110] directions

The deformation behavior of aluminum single crystals subjected to compression along the [100] and [110] directions is numerically examined in terms of crystal plasticity. A constitutive model taking into account slip geometry in face-centered cubic crystals is developed using experimental data for the single-crystal samples with lateral sides coplanar to certain crystal planes. Two sets of calculations are performed using ABAQUS/Explicit to examine the features of plastic strain evolution in perfectly plastic and strain-hardened crystals. Special attention is given to the discussion of mechanical aspects of crystal fragmentation. Several distinct deformation stages are revealed in the calculations. In the first stage, narrow solitary fronts of plastic deformation are alternately formed near the top or bottom surfaces and then propagate towards opposite ends to save the symmetry of the crystal shape. The strain rate within the fronts is an order of magnitude higher than the average strain rate. The first stage lasts longer in the strain-hardened crystals, eventually giving way to an intermediate stage of multiple slips in different crystal parts. Finally, the crystal shape becomes asymmetrical, but no pronounced macroscopic strain localization has been revealed at any deformation stage. The second stage in perfectly plastic crystals relates to abrupt strain localization within a through-thickness band-shaped region, accompanied by macroscale crystal fragmentation. Stress analysis has shown that pure compression took place only in the first deformation stage. Once the crystal shape has lost its symmetry, the compressive stress in some regions progressively decreases to zero and eventually turns tensile

Experimental Research Into Generation of Acoustic Emission Signals in the Process of Friction of Hadfield Steel Single Crystals

The results of experimental research into dry sliding friction of Hadfield steel single crystals involving registration of acoustic emission are presented in the paper. The images of friction surfaces of Hadfield steel single crystals and wear grooves of the counterbody surface made after completion of three serial experiments conducted under similar conditions and friction regimes are given. The relation of the acoustic emission waveform envelope to the changing friction factor is revealed. Amplitude-frequency characteristics of acoustic emission signal frames are determined on the base of Fast Fourier Transform and Short Time Fourier Transform during the run-in stage of tribounits and in the process of stable friction

Preferred orientation evolution of olivine grains as an indicator of change in the deformation mechanism

The paper presents the results of investigations of deformed natural polycrystalline olivine. The relationship of the structure of polycrystalline olivine grains to three modal size distributions has been revealed. Grains of different size were observed to be strained at threshold temperatures of 950, 775, and 650°C. It has been demonstrated that the microstructure develops as the dislocation mechanism changes from diffusion creep to grain boundary sliding. The changes in deformation mechanisms promote the change in the preferred crystallographic orientations of olivine from type A to type D and then to type B. The relation of the transitions between different types of orientations to the conditions of deformation in the lower layers of the lithosphere at the plate boundaries is discussed

Structure of welded joints obtained by contact weld in nanostructured titanium

The paper presents the research of the weld structure of two Ti specimens of the type VT6 that have nano- and submicrocrystalline structures. Electrical contact welding is used to obtain welds. The acicular structure is formed in the weld area. Two types of defects are detected, namely micropores and microcracks