Summary of Coral Cay Conservation's habitat mapping data from Utila, Honduras

IIThe coral reefs of Honduras are of vital national and international importance,both ecologically and economically, but are threatened because of rapid economicand population growth.? During work on Utila between 1999 and 2000 (the ?Bay Islands 2000? project),Coral Cay Conservation developed a programme of surveys, training andconservation education aimed at assessing the status of local reefs and improvingenvironmental awareness amongst neighbouring communities.? This summary report provides an overview of the habitat mapping data collectedby the Bay Islands 2000 project.? CASA provided software, hardware and skills, on a charitable basis to ensure thatthe data collected by CCC could be developed into a GIS, not only for mappingthe status of the coral reefs of Honduras, but also to provide analysis of the aerialextent of these reefs.? Data were collected within individual ?study areas?, to facilitate analysis at a rangeof spatial scales, and utilised the CCC standard baseline survey technique for therapid assessment of the characteristics of reef communities. The surveys,therefore, utilised a series of transects, perpendicular to the reef.? Baseline transects discriminated nine benthic and six geomorpholgical classeswhich indicates Utila has a high habitat diversity. Habitat diversity is importantsince the number of habitat types has been shown to be a good representation ofspecies biodiversity.? The nine benthic classes that were distinguished were all relatively coral poorbecause of a suite of relatively long-term local and regional factors, exacerbatedby the combination of Hurricane Mitch and coral bleaching in 1995 and 1998.? Damselfish were the most abundant reef associated fish recorded during baselinetransect surveys. Commercially important fish were less abundant that wouldnormally be expected in unfished systems.? A recurring pattern in the baseline transect data was the greater abundance anddiversity of fish in coral rich classes. However, although the link between fishabundance and coral cover was clear, not all species were necessarily mostabundant in the most coral rich areas.? Invertebrates were generally uncommon, partly because of fishing pressure, andthe abundances of many invertebrate taxa were correlated with coral cover.? A habitat map is presented within this report as an indication of the distribution ofhabitat types around Utila.? Using the map, estimates of areal extents of each benthic class and habitat type areinstructive. For example, there is only approximately 27 km2 of reefal habitatsaround Utila. Furthermore, the area supporting the most coral rich benthic classesis only approximately 4 km2 (15%). These statistics both highlight the damagecaused by the bleaching event and Hurricane Mitch and other anthropogenicimpacts and the need to conserve remaining coral rich areas.? If further reserves were to be created, it would be important to try to protect arange of reef and habitat types. For this reason, it appears that the Turtle HarbourWildlife Refuge is well placed since this areas includes a wide range of habitattypes. However, placement of reserves in Utila should favour relatively coral richhabitats over sand dominated areas.? This study led to six recommendations:Summary Utila habitat mapping reportIII? One or more agencies should collect additional ground-truthing data fromaround Utila to facilitate both classification of currently ?Unknown? polygonsand an accuracy assessment of the map.? Establish an integrated GIS and associated meta-database for Utila, includingdata from the Bay Islands 2000 project.? Examine the potential of using data collected by the Bay Islands 2000 projectas the basis of national habitat classification scheme and subsequent nationalhabitat map.? Continue to aim to establish one or more additional multiple use marineprotected areas around Utila, with an integrated monitoring programme tomeasure their efficacy, and strengthen the enforcement of regulations in theTurtle Harbour Wildlife Sanctuary. Establish regulations, and enforce existinglegislation, to minimise the detrimental effects of coastal development on reefhealth.? Additional marine reserves in Utila should integrate factors such as thepreference of many fish species for coral rich habitats and the protection ofareas incorporating a range of habitat types, including mangroves and seagrassbeds, in order to allow for nursery areas, ontogenetic shifts and species thatrely on non-coral rich habitats. The corollary of the preference of fish speciesfor coral rich habitats is to protect coral cover within the reserves.? The reef on the south coast of Utila appears to be a good candidate forprotection because it is relatively sheltered from storm and hurricane damage

Fuzzy Adaptive Tuning of a Particle Swarm Optimization Algorithm for Variable-Strength Combinatorial Test Suite Generation

Combinatorial interaction testing is an important software testing technique that has seen lots of recent interest. It can reduce the number of test cases needed by considering interactions between combinations of input parameters. Empirical evidence shows that it effectively detects faults, in particular, for highly configurable software systems. In real-world software testing, the input variables may vary in how strongly they interact, variable strength combinatorial interaction testing (VS-CIT) can exploit this for higher effectiveness. The generation of variable strength test suites is a non-deterministic polynomial-time (NP) hard computational problem \cite{BestounKamalFuzzy2017}. Research has shown that stochastic population-based algorithms such as particle swarm optimization (PSO) can be efficient compared to alternatives for VS-CIT problems. Nevertheless, they require detailed control for the exploitation and exploration trade-off to avoid premature convergence (i.e. being trapped in local optima) as well as to enhance the solution diversity. Here, we present a new variant of PSO based on Mamdani fuzzy inference system \cite{Camastra2015,TSAKIRIDIS2017257,KHOSRAVANIAN2016280}, to permit adaptive selection of its global and local search operations. We detail the design of this combined algorithm and evaluate it through experiments on multiple synthetic and benchmark problems. We conclude that fuzzy adaptive selection of global and local search operations is, at least, feasible as it performs only second-best to a discrete variant of PSO, called DPSO. Concerning obtaining the best mean test suite size, the fuzzy adaptation even outperforms DPSO occasionally. We discuss the reasons behind this performance and outline relevant areas of future work.Comment: 21 page

The Economics of Brexit needn’t be quixotic: Towards a green industrial strategy for Britain

“Fortune is guiding our affairs better than we ourselves could have wished. Do you see over yonder, friend Sancho, thirty or forty hulking giants? I intend to do battle with them and slay them. With their spoils we shall begin to be rich for this is a righteous war and the removal of so foul a brood from off the face of the earth is a service God will bless.

Maintaining Seed Quality of Maize and Wheat through Dry Chain Technology in Pakistan

Seed is inevitably deteriorated during storage and higher seed moisture content is the primary cause of this decline in seed quality. Dry Chain is a valuable tool, by using moisture proof hermetic containers to preserve seed quality throughout supply chain. This study evaluated and compared the performance of wheat and maize seed in different hermetic storage packaging (Super bag, Anaaji bag and drum) with conventionally used woven polypropylene bags after six months storage in ambient conditions. Seed moisture content was increased up to 11.53 and 13.55% in wheat and maize respectively when packed in polypropylene bags while it remained low (approximately 10 and 11.4% in wheat and maize respectively) when packed in hermetically sealed bags and drum. Germination was maintained in both cereal seeds stored in hermetically sealed Super bag, anaaji bag and drum while it reduced in polypropylene bags as compared to initial seed quality. Seed stored in polypropylene bag deteriorated quickly, which resulted in loss of seed vigour as indicated by higher malondialdehyde contents and electrical conductivity of seed leachates. It can be concluded that maintenance of seed dryness with hermetic storage is useful in preservation of seed quality and related attributes under high relative humidity environment

Trench width dependant deeply etched surface-defined InP gratings for low-cost high speed DFB/DBR

In this paper we are reporting a fabrication process for multi-section telecom lasers based on surface defined lateral gratings, which is compatible with low-cost high-throughput nano-imprint lithography. A new grating definition process is developed, which allow a better control of the cross section geometry to obtain higher coupling strength

Four-Face Heated Uniaxial Reinforced Concrete Columns Interaction Charts

This paper presents an analytical method for generating the interaction diagrams of uniaxially reinforced concrete (RC) columns that are subjected to four-face heating. Twenty-one (21) specimens obtained from previous case studies that were subjected to four-face heating (with different fire test times ranging from 63 to 356 fire minutes) are used to validate the proposed uniaxial interaction charts. The results obtained from the case studies and from the proposed charts are also compared with the finite element software (FIN EC). The 500°C isotherm as well as the zone method are used in the computer software program to find the required load capacities. The proposed method's values fall within the range of values obtained from laboratory tests and computer software, which suggests its validity. Also, the zone method in FIN-EC software is reliable for evaluating load-bearing capacity, while the 500°C method is useful in situations with shorter fire times. The results obtained provide a valuable tool for designing and evaluating structures that may be exposed to fire. Nonetheless, the study is restricted by its concentration on a particular type of column under four-face heating, which may reduce its relevance to other types of structures and heating situations. Doi: 10.28991/CEJ-2023-09-07-01 Full Text: PD

“making space” in practice and education: Research support services in academic libraries

Design/methodology/approach – The present paper uses data from a recent survey of research support provision by academic libraries in Australia, New Zealand, the UK and Ireland, (authors 2013), and provides additional in depth analysis of the textual responses to extend the analysis in the light of forces for change in higher education. The original online questionnaire surveyed current and planned research support in academic libraries, and constraints or support needs related to service developments. It was distributed to 219 institutions in Australia, New Zealand, the UK, and Ireland, and obtained 140 valid responses (response rate of 63.9 percent). Results were analyzed using descriptive statistics with thematic categorization and coding for the textual responses

Multi-objective optimisation for minimum quantity lubrication assisted milling process based on hybrid response surface methodology and multi-objective genetic algorithm

© 2019 by SAGE Publications Ltd.Parametric modelling and optimisation play an important role in choosing the best or optimal cutting conditions and parameters during machining to achieve the desirable results. However, analysis of optimisation of minimum quantity lubrication–assisted milling process has not been addressed in detail. Minimum quantity lubrication method is very effective for cost reduction and promotes green machining. Hence, this article focuses on minimum quantity lubrication–assisted milling machining parameters on AISI 1045 material surface roughness and power consumption. A novel low-cost power measurement system is developed to measure the power consumption. A predictive mathematical model is developed for surface roughness and power consumption. The effects of minimum quantity lubrication and machining parameters are examined to determine the optimum conditions with minimum surface roughness and minimum power consumption. Empirical models are developed to predict surface roughness and power of machine tool effectively and accurately using response surface methodology and multi-objective optimisation genetic algorithm. Comparison of results obtained from response surface methodology and multi-objective optimisation genetic algorithm depict that both measured and predicted values have a close agreement. This model could be helpful to select the best combination of end-milling machining parameters to save power consumption and time, consequently, increasing both productivity and profitability.Peer reviewedFinal Published versio