Overexpression and Divalent Metal Binding Properties of the Methionyl Aminopeptidase from \u3cem\u3ePyrococcus furiosus\u3c/em\u3e

The gene encoding for the methionyl aminopeptidase from the hyperthermophilic archaeon Pyrococcus furiosus (PfMetAP-II; EC 3.4.11.18) has been inserted into a pET 27b(+) vector and overexpressed in Escherichia coli. The new expression system resulted in a 5-fold increase in purified enzyme obtained from a 5 L fermentor growth. The as-purified PfMetAP-II enzyme, to which no exogenous metal ions or EDTA was added, was found to have 1.2 equiv of zinc and 0.1 equiv of iron present by ICP-AES analysis. This enzyme had a specific activity of 5 units/mg, a 60-fold decrease from the fully loaded Fe(II) enzymes. When an additional 2 equiv of Zn(II) was added to the as-purified PfMetAP-II, no activity could be detected. The combination of these data with previously reported whole cell studies on EcMetAP-I further supports the suggestion that the in vivo metal ion for all MetAP\u27s is Fe(II). Both Co(II)- and Fe(II)-loaded PfMetAP-II showed similar substrate specificities to EcMetAP-I. Substrate binding was largely affected by the amino acid in the P1 position and the length of the polypeptide. The substrates MSSHRWDW and MP-p-NA showed the smallest Km values while the substrates MGMM and MP-p-NA provided the highest turnover. The catalytic efficiency (kcat/Km) of PfMetAP-II for MP-p-NA at 30 °C was 799 500 and 340 930 M-1 s-1 for Co(II)- and Fe(II)-loaded PfMetAP-II, respectively. Maximum catalytic activity was obtained with 1 equiv of Co(II) or Fe(II), and the dissociation constants (Kd) for the first metal binding site were found to be 50 ± 15 and 20 ± 15 nM for Co(II)- and Fe(II)-substituted PfMetAP-II, respectively. Electronic absorption spectral titration of a 1 mM sample of apo-PfMetAP-II with Co(II) provided a dissociation constant of 0.35 ± 0.02 mM for the second metal binding site, a 17500-fold increase compared to the first metal binding site. The electronic absorption data also indicated that both Co(II) ions reside in a pentacoordinate geometry. PfMetAP-II shows unique thermostability and the optimal temperature for substrate turnover was found to be ∼85 °C at pH 7.5 in 25 mM Hepes and 150 mM KCl buffer. The hydrolysis of MGMM was measured in triplicate between 25 and 85 °C at eight substrate concentrations ranging from 2 to 20 mM. Both specific activity and Km values increased with increasing temperature. An Arrhenius plot was constructed from the kcat values and was found to be linear over the temperature range 25−85 °C, indicating that the rate-limiting step in PfMetAP-II peptide hydrolysis does not change as a function of temperature. Co(II)- and Fe(II)-loaded PfMetAP-II have similar activation energies (13.3 and 19.4 kJ/mol, respectively). The thermodynamic parameters calculated at 25 °C are as follows:  ΔG⧧ = 46.23 kJ/mol, ΔH⧧ = 10.79 kJ/mol, and ΔS⧧ = −119.72 J·mol-1·K-1 for Co(II)-loaded PfMetAP; ΔG⧧ = 46.44 kJ/mol, ΔH⧧ = 16.94 kJ/mol, and ΔS⧧ = −99.67 J·mol-1·K-1 for Fe(II)-loaded PfMetAP. Interestingly, at higher temperatures (\u3e50 °C), Fe(II)-loaded PfMetAP-II is more active (1.4-fold at 85 °C) than Co(II)-loaded PfMetAP-II

Kinetic and Structural Characterization of Manganese(II)-Loaded Methionyl Aminopeptidases

Manganese(II) activation of the methionyl aminopeptidases from Escherichia coli (EcMetAP-I) and the hyperthermophilic archaeon Pyrococcus furiosus (PfMetAP-II) was investigated. Maximum catalytic activity for both enzymes was obtained with 1 equiv of Mn(II), and the dissociation constants (Kd) for the first metal binding site were found to be 6 ± 0.5 and 1 ± 0.5 μM for EcMetAP-I and PfMetAP-II, respectively. These Kd values were verified by isothermal titration calorimetry (ITC) and found to be 3.0 ± 0.2 and 1.4 ± 0.2 μM for EcMetAP-I and PfMetAP-II, respectively. The hydrolysis of MGMM was measured in triplicate between 25 and 85 °C at eight substrate concentrations ranging from 2 to 20 mM for PfMetAP-II. Both specific activity and Km values increased with increasing temperature. An Arrhenius plot was constructed from the kcat values and was found to be linear over the temperature range 25−85 °C. The activation energy for the Mn(II)-loaded PfMetAP-II hydrolysis of MGMM was found to be 25.7 kJ/mol while the remaining thermodynamic parameters calculated at 25 °C are ΔG⧧ = 50.1 kJ/mol, ΔH⧧ = 23.2 kJ/mol, and ΔS⧧ = −90.2 J·mol-1·K-1

EPR and X-ray Crystallographic Characterization of the Product-Bound Form of the Mn\u3csup\u3eII\u3c/sup\u3e-Loaded Methionyl Aminopeptidase from \u3cem\u3ePyrococcus furiosus\u3c/em\u3e

Methionine aminopeptidases (MetAPs) are ubiquitous metallohydrolases that remove the N-terminal methionine from nascent polypeptide chains. Although various crystal structures of MetAP in the presence of inhibitors have been solved, the structural aspects of the product-bound step has received little attention. Both perpendicular- and parallel-mode electron paramagnetic resonance (EPR) spectra were recorded for the MnII-loaded forms of the type-I (Escherichia coli) and type-II (Pyrococcus furiosus) MetAPs in the presence of the reaction product l-methionine (l-Met). In general, similar EPR features were observed for both [MnMn(EcMetAP-I)]−l-Met and [MnMn(PfMetAP-II)]−l-Met. The observed perpendicular-mode EPR spectra consisted of a six-line hyperfine pattern at g = 2.03 (A = 8.8 mT) with less intense signals with eleven-line splitting at g = 2.4 and 1.7 (A = 4.4 mT). The former feature results from mononuclear, magnetically isolated MnII ions and this signal are 3-fold more intense in the [MnMn(PfMetAP-II)]−l-Met EPR spectrum than in the [MnMn(EcMetAP-I)]−l-Met spectrum. Inspection of the EPR spectra of both [MnMn(EcMetAP-I)]−l-Met and [MnMn(PfMetAP-II)]−l-Met at 40 K in the parallel mode reveals that the [Mn(EcMetAP-I)]−l-Met spectrum exhibits a well-resolved hyperfine split pattern at g = 7.6 with a hyperfine splitting constant of A = 4.4 mT. These data suggest the presence of a magnetically coupled dinuclear MnII center. On the other hand, a similar feature was not observed for the [MnMn(PfMetAP-II)]−l-Met complex. Therefore, the EPR data suggest that l-Met binds to [MnMn(EcMetAP-I)] differently than [MnMn(PfMetAP-II)]. To confirm these data, the X-ray crystal structure of [MnMn(PfMetAP-II)]−l-Met was solved to 2.3 Å resolution. Both Mn1 and Mn2 reside in a distorted trigonal bipyramidal geometry, but the bridging water molecule, observed in the [CoCo(PfMetAP-II)] structure, is absent. Therefore, l-Met binding displaces this water molecule, but the carboxylate oxygen atom of l-Met does not bridge between the two MnII ions. Instead, a single carboxylate oxygen atom of l-Met interacts with only Mn1, while the N-terminal amine nitrogen atom binds to M2. This l-Met binding mode is different from that observed for l-Met binding [CoCo(EcMetAP-I)]. Therefore, the catalytic mechanisms of type-I MetAPs may differ somewhat from type-II enzymes when a dinuclear metalloactive site is present

Characterization of Protein/Protein Interactions Involved in Iron Reduction by Shewanella oneidensis MR-1

The interaction of proteins implicated in dissimilatory metal reduction by Shewanella oneidensis MR-1 (outer membrane [OM] proteins OmcA, MtrB, and MtrC; OM-associated protein MtrA; periplasmic protein CctA; and cytoplasmic membrane protein CymA) were characterized by protein purification, analytical ultracentrifugation, and cross-linking methods. Five of these proteins are heme proteins, OmcA (83 kDa), MtrC (75 kDa), MtrA (32 kDa), CctA (19 kDa), and CymA (21 kDa), and can be visualized after sodium dodecyl sulfate-polyacrylamide gel electrophoresis by heme staining. We show for the first time that MtrC, MtrA, and MtrB form a 198-kDa complex with a 1:1:1 stoichiometry. These proteins copurify through anion-exchange chromatography, and the purified complex has the ability to reduce multiple forms of Fe(III) and Mn(IV). Additionally, MtrA fractionates with the OM through sucrose density gradient ultracentrifugation, and MtrA comigrates with MtrB in native gels. Protein cross-linking of whole cells with 1% formaldehyde show new heme bands of 160, 151, 136, and 59 kDa. Using antibodies to detect each protein separately, heme proteins OmcA and MtrC were shown to cross-link, yielding the 160-kDa band. Consistent with copurification results, MtrB cross-links with MtrA, forming high-molecular-mass bands of approximately 151 and 136 kDa