Low concentration of Bisphenol a induces proliferation of gastric cancer cells, HGC-27

Bisphenol A, an endocrine disrupting compound that affects human homeostasis. Studies on BPA are focusing on the impact of BPA in reproductive function and brain development. However, the effect of BPA on gut especially gastric cells is not well explored. Gut is directly in contact with ingested BPA; therefore, we aimed to determine the effect of BPA exposure on gastric cells proliferation at safe recommended concentration. Human gastric cancer cells (HGC-27) were treated with BPA at different concentration (low: 10-9M, 10-7M; high10-5M, 10-4M) and time point (24 hr, 48 hr, 72 hr). Cell viability assays were determined using MTS assay. Cells were further stained with Alexa Fluor-635 (F-actin) and Fluorescein (Hif-1α) protein for immunocytofluorescence. Data were analysed using ANOVA (p<0.05, n≥3). Cells treated with 10-9M BPA showed significance increase of cell viability after 48 hr (Mean ±SEM; 146%±0.03, p=0.01) and 72 hr (113%±0.03, p=0.00) compared to 24 hr treatment (77%±0.11, p=0.002). Similarly, cell treated with 10-7M BPA showed a significance increase after 48 hr (141%±0.03, p=0.03) and 72 hr (190%±0.03, p=0.02) compared to 24 hr cells treated with 10-7M (88%±0.05, p=0.01) and untreated (100%±0.07). Lower concentration of BPA increases the condensation of F-actin in all HGC-27 cells. Meanwhile, translocation of Hif-1α protein were observed in all BPA-exposed cells. Findings of this study revealed that BPA induced proliferation and condensation of F-actin structure of gastric cancer cells at low concentration

Aloe emodin induces apoptosis in ER+-breast cancer cells; MCF-7 through IGF-1R signalling pathway

Two-third of breast cancer patients expressed estrogen receptors (ER)s and received endocrine treatment with established anti-estrogens such as tamoxifen. But the action and acquired resistance during treatment are largely unknown. In contrary, phytochemicals are more selective and less cytotoxic to normal cells. Accordingly, we found aloe emodin, an anthraquinone to inhibit the proliferation of ER+-breast cancer cells, MCF-7 with IC50 of 80 μM, but not affecting control breast cells, MCF-10A. Tamoxifen was non-selective to both cells with IC50 of 27 and 38 μM, respectively. Thus, we aimed to investigate the anti-proliferative mechanism of aloe emodin on MCF-7 and its underlying signalling compared to tamoxifen. Cells were treated separately with aloe emodin and tamoxifen at respective IC50 for 72 h. Apoptosis was determined using Annexin V-FITC/PI staining. The expression of insulin-like growth factor-1 receptor (IGF-1R), insulin-like growth factor binding protein (IGFBP)-2 and B-raf gene was investigated using QuantiGene 2.0 Plex assay. Paired-student t-test and ANOVA test were used to compare between untreated and treated cells on the measured parameters. Each treatment was conducted in triplicate and repeated three times. Significance was set at p<0.05. The presences of early and late apoptosis in MCF-7 were seen in both treatments. All target genes were down regulated. The anti-proliferation effect of aloe emodin on MCF-7 is similar with tamoxifen which mediates inhibition of IGF-1R signalling pathway. This suggests aloe emodin as a potential anti-cancer agent to be used in combined anti-estrogen therapy to enhance its efficacy in ER+-breast cancer treatment

Effects of bisphenol a on neonatal cardiomyocytes beating rate and morphology

Bisphenol A (BPA) has been utilised excessively at a global capacity of 2.9 billion kg/year. It is widely used in manufacturing polycarbonate polymers and epoxy resins. Hence, humans are potentially exposed to this chemical substance in their daily life. As a typical endocrine disruptor, BPA exhibits detectable hormone-like properties. Many studies have been linking BPA exposure in humans with the risk of developing cardiovascular disease, however the direct exposure of BPA on cardiomyocytes beating rates and morphology have not been entirely explored. Therefore, in this study, we aimed to investigate the effects of BPA on cells structure and function of neonatal rat cardiomyocytes culture. Cardiomyocytes were isolated from 0 to 2 days old newborn rats and treated with 0.001 to 100 µM concentration of BPA. All cardiomyocytes were subjected to immunostaining, beating frequency assessment assay, MTS assay and Scanning Electron microscopy (SEM). In immunostaining, cardiomyocytes showed positive staining for F-actin. This staining allows identification of the cells thus differentiate cardiomyocytes from other cell types. Significance effects of BPA on cardiomyocytes were observed in MTS assay (p<0.05) and beating rates (p<0.01). Significant reduction (48%-64%, ± 1.5280) was observed in beating rate of cardiomyocytes exposed to 0.1 to 100 µM of BPA. Meanwhile in MTS assay, significant reduction (54%, 0.067 ± 0.0026) in cell viability was observed in cells exposed to 0.1 µM of BPA only. Interestingly, under SEM, cardiomyocytes showed altered cell surface homogeneity after BPA exposure. Exposure of 0.1 to 100 µM BPA lead to flatten of cardiomyocytes cell surface and blurring of the cell borders. This study offers an in vitro evidence of BPA effects on cardiomyocytes morphology and beating rates, thus suggest the potential adverse effect of BPA exposure. However, further investigation would be required to understand how BPA effects normal cells morphology and beating rates of heart cells

High flux polysulfone braided hollow fiber membrane for wastewater treatment role of zinc oxide as hydrophilic enhancer

Incorporation of zinc oxide (ZnO) nanoparticles has played an important role on the improvement of unique membrane characterization and performance, most notably the hydrophilic modification of the membrane for higher pure water permeability. Additionally, the permeability of the membrane can be improved via introduction of braid support by reducing the thickness of the membrane separation layer. Moreover, the braided hollow fiber membrane (BHFM) is able to perform under higher pressure conditions compared to hollow fiber membranes. In this paper, hybrid polysulfone (PSf)/ZnO BHFMs were fabricated via phase inversion method. Hydrophilic 10 ± 1.8 nm polycrystalline ZnO nanoparticles synthesized via sol-gel method were incorporated on BHFM to improve the hydrophilicity and increase flux with constant rejection under high pressure and the effect of the ZnO loading on the membrane properties and performance were thoroughly studied. The fabricated BHFMs with 0.0, 0.5, 1.0 and 1.5 wt% of ZnO nanoparticles concentration were defined as BHFM1, BHFM2, BHFM3 and BHFM4 respectively. Scanning electron microscopy (SEM), contact angle, mechanical strength, flux performance, rejection with bovine serum albumin (BSA) and fouling of best performed membrane were conducted to achieve the target of this paper. The performance of these hybrid ZnO/PSf BHFMs were compared with neat PSf hollow fiber membrane (HFM) and previous studies. The findings from this research work shows that BHFM4 has the most desired properties for wastewater treatment application. The ZnO nanoparticles in BHFM4 have improved hydrophilicity from 108.79° to 71.02°, and thus BHFM4 has increased flux performance from 36.20 to 919.12 L/m2 h at 1.0 bar pressure and 193.48 to 1909.11 L/m2h at 4.0 bar pressure when compared with BHFM1. Constant BSA rejection rates (> 90%) were observed in all BHFMs. The improved hydrophilicity and pure flux performance with constant rejection rate in high pressure conditions illustrates the suitability of fabricated ZnO/PSf BHFMs in wastewater treatment applications

Fabrication of high performance PVDF hollow fiber membrane using less toxic solvent at different additive loading and air gap

Existing toxic solvents in the manufacturing of polymeric membranes have been raising concerns due to the risks of exposure to health and the environment. Furthermore, the lower tensile strength of the membrane renders these membranes unable to endure greater pressure during water treatment. To sustain a healthier ecosystem, fabrication of polyvinylidene fluoride (PVDF) hollow fiber membrane using a less toxic solvent, triethyl phosphate (TEP), with a lower molecular weight polyethylene glycol (PEG 400) (0–3 wt.%) additive were experimentally demonstrated via a phase inversion-based spinning technique at various air gap (10, 20 and 30 cm). Membrane with 2 wt.% of PEG 400 exhibited the desired ultrafiltration asymmetric morphology, while 3 wt.% PEG 400 resulting microfiltration. The surface roughness, porosity, and water flux performance increased as the loading of PEG 400 increased. The mechanical properties and contact angle of the fabricated membrane were influenced by the air gap where 20 cm indicate 2.91 MPa and 84.72◦, respectively, leading to a stronger tensile and hydrophilicity surface. Lower toxicity TEP as a solvent helped in increasing the tensile properties of the membrane as well as producing an eco-friendly membrane towards creating a sustainable environment. The comprehensive investigation in this study may present a novel composition for the robust structure of polymeric hollow fiber membrane that is suitable in membrane technology

Immobilization techniques of a photocatalyst into and onto a polymer membrane for photocatalytic activity

This article reviews the various techniques of immobilizing a photocatalyst into and onto the polymer membrane for pollutant removal and as a problem solver in handling suspended photocatalyst issues from the previous literature. A particular focus is given to the preparation of mixed matrix membranes and deposition techniques for photocatalytic degradation in applications for wastewater treatment. Advantages and disadvantages in this application are evaluated. Various operating conditions during the process are presented. About 90 recently published studies (2008-2020) are reviewed. From the literature, it was found that TiO2is the most favoured photocatalyst that is frequently used in photocatalytic water treatment. Dry-wet co-spinning and sputtering techniques emerged as the promising technique for immobilizing a uniformly distributed photocatalyst within the polymeric membrane, and exhibited excellence pollutant removal. In general, the technical applicability is the key factor in selecting the best photocatalyst immobilizing technique for water treatment. Finally, the scope of various techniques that have been reviewed may provide potential for future photocatalytic study

The impact of bisphenol A exposure during pregnancy on the heart of mother and fetal rats

In utero bisphenol A (BPA) exposure has been reported to increase the risk of cardiovascular disease (CVD) in adult life. Thus, this study aimed to investigate the impact of in utero BPA exposure on proteins expression related to cardiac function in heart of rat foetuses (Rattus norvegicus). In here, pregnant rats were divided into tween-80 (vehicle control), 0.05 mg/mL and 0.2 mg/mL BPA via drinking water for 19 days: from pregnancy day 2 till 21. Caesarean section was conducted on pregnancy day 21 to collect plasma and heart of both mother and foetuses. BPA-exposed pregnant rats showed significant increase in blood pressure (BP) and reduction in glycogen content (p<0.05) in comparison to control pregnant rats. Remarkably, reduced expression of cardiac troponin I (cTnI) and redistribution of alpha fetoprotein (AFP) expression were in foetus of BPA-exposed mother in comparison with foetus of control mother. Hypoxia induced factor-1 alpha (HIF-1α) expression was elevated in BPA-exposed foetal heart compared to the control. The findings in here suggest the risk of in utero BPA exposure on both foetus and mother, which may increase the risk of CVD in later life by altering the expression of protein crucial for heart development and function

Polyvinylidene Difluoride (PVDF) Hollow Fiber Membrane Incorporated with Antibacterial and Anti-Fouling by Zinc Oxide for Water and Wastewater Treatment

The addition of antibacterial material to hollow fiber membranes improves the membrane anti-biofouling characteristics. Antibacterial membranes were fabricated in this study to improve membrane function while also extending membrane lifetime. Neat polyvinylidene difluoride (PVDF) and PVDF hollow fiber membrane with the incorporation of antibacterial agent zinc oxide (ZnO) nanoparticles with various loading (2.5&ndash;7.5 wt.%) were fabricated by using dry/wet spinning method. The membrane structure, particle distribution, functional group, hydrophilicity, and pore size of each membrane were all assessed. The result shows that all ZnO/PVDF hollow fiber membranes have the asymmetric structure with even dispersion of ZnO nanoparticles throughout the membranes. The results showed that increased ZnO loadings considerably improved membrane hydrophilicity, and average pore size, in addition to good performance of pure water flux. Antibacterial testing shows that ZnO incorporated in the membrane matrix and membrane surfaces prevents bacteria that cause biofouling from adhering to the membrane. ZnO/PVDF membrane recorded excellent bovine serum albumin (BSA) rejection at 93.4% &plusmn; 0.4 with flux recovery rate at 70.9% &plusmn; 2.1. These results suggest that antibacterial ZnO/PVDF hollow fiber membranes are promising in relation to reducing biofouling for various water and wastewater treatment