15 research outputs found
Optical absorption of ion-beam sputtered amorphous silicon coatings
Low mechanical loss at low temperatures and a high index of refraction should make silicon
optimally suited for thermal noise reduction in highly reflective mirror coatings for gravitational wave
detectors. However, due to high optical absorption, amorphous silicon (aSi) is unsuitable for being used
as a direct high-index coating material to replace tantala. A possible solution is a multimaterial design,
which enables exploitation of the excellent mechanical properties of aSi in the lower coating layers. The
possible number of aSi layers increases with absorption reduction. In this work, the optimum heat
treatment temperature of aSi deposited via ion-beam sputtering was investigated and found to be 450 °C.
For this temperature, the absorption after deposition of a single layer of aSi at 1064 nm and 1550 nm
was reduced by more than 80%
Cryogenic mechanical loss of a single-crystalline GaP coating layer for precision measurement applications
The first direct observations of gravitational waves have been made by the Advanced LIGO detectors.
However, the quest to improve the sensitivities of these detectors remains, and epitaxially grown single-crystal
coatings show considerable promise as alternatives to the ion-beam sputtered amorphous mirror
coatings typically used in these detectors and other such precision optical measurements. The mechanical
loss of a 1 μm thick single-crystalline gallium phosphide (GaP) coating, incorporating a buffer layer region
necessary for the growth of high quality epitaxial coatings, has been investigated over a broad range of
frequencies and with fine temperature resolution. It is shown that at 20 K the mechanical loss of GaP is a
factor of 40 less than an undoped tantala film heat-treated to 600 °C and is comparable to the loss of a
multilayer GaP/AlGaP coating. This is shown to translate into possible reductions in coating thermal noise
of a factor of 2 at 120 K and 5 at 20 K over the current best IBS coatings (alternating stacks of silica and
titania-doped tantala). There is also evidence of a thermally activated dissipation process between 50 and
70 K
Order within disorder: the atomic structure of ion-beam sputtered amorphous tantala (a-Ta2O5)
Amorphous tantala (a-Ta2O5) is a technologically important material often used in high-performance coatings. Understanding this material at the atomic level provides a way to further improve performance. This work details extended X-ray absorption fine structure measurements of a-Ta2O5 coatings, where high-quality experimental data and theoretical fits have allowed a detailed interpretation of the nearest-neighbor distributions. It was found that the tantalum atom is surrounded by four shells of atoms in sequence; oxygen, tantalum, oxygen, and tantalum. A discussion is also included on how these models can be interpreted within the context of published crystalline Ta 2O5 and other a-T2O5 studies
Investigating the medium range order in amorphous Ta<sub>2</sub>O<sub>5</sub> coatings
Ion-beam sputtered amorphous heavy metal oxides, such as Ta2O5, are widely used as the high refractive index layer of highly reflective dielectric coatings. Such coatings are used in the ground based Laser Interferometer Gravitational-wave Observatory (LIGO), in which mechanical loss, directly related to Brownian thermal noise, from the coatings forms an important limit to the sensitivity of the LIGO detector. It has previously been shown that heat-treatment and TiO2 doping of amorphous Ta2O5 coatings causes significant changes to the levels of mechanical loss measured and is thought to result from changes in the atomic structure. This work aims to find ways to reduce the levels of mechanical loss in the coatings by understanding the atomic structure properties that are responsible for it, and thus helping to increase the LIGO detector sensitivity. Using a combination of Reduced Density Functions (RDFs) from electron diffraction and Fluctuation Electron Microscopy (FEM), we probe the medium range order (in the 2-3 nm range) of these amorphous coatings
Order within disorder: The atomic structure of ion-beam sputtered amorphous tantala (a-Ta_2O_5)
Amorphous tantala (a-Ta_2O_5) is a technologically important material often used in high-performance coatings. Understanding this material at the atomic level provides a way to further improve performance. This work details extended X-ray absorption fine structure measurements of a-Ta_2O_5 coatings, where high-quality experimental data and theoretical fits have allowed a detailed interpretation of the nearest-neighbor distributions. It was found that the tantalum atom is surrounded by four shells of atoms in sequence; oxygen, tantalum, oxygen, and tantalum. A discussion is also included on how these models can be interpreted within the context of published crystalline Ta 2O5 and other a-T_2O_5 studies
A Cryogenic Silicon Interferometer for Gravitational-wave Detection
The detection of gravitational waves from compact binary mergers by LIGO has opened the era of gravitational wave astronomy, revealing a previously hidden side of the cosmos. To maximize the reach of the existing LIGO observatory facilities, we have designed a new instrument able to detect gravitational waves at distances 5 times further away than possible with Advanced LIGO, or at greater than 100 times the event rate. Observations with this new instrument will make possible dramatic steps toward understanding the physics of the nearby Universe, as well as observing the Universe out to cosmological distances by the detection of binary black hole coalescences. This article presents the instrument design and a quantitative analysis of the anticipated noise floor
A Cryogenic Silicon Interferometer for Gravitational-wave Detection
The detection of gravitational waves from compact binary mergers by LIGO has
opened the era of gravitational wave astronomy, revealing a previously hidden
side of the cosmos. To maximize the reach of the existing LIGO observatory
facilities, we have designed a new instrument that will have 5 times the range
of Advanced LIGO, or greater than 100 times the event rate. Observations with
this new instrument will make possible dramatic steps toward understanding the
physics of the nearby universe, as well as observing the universe out to
cosmological distances by the detection of binary black hole coalescences. This
article presents the instrument design and a quantitative analysis of the
anticipated noise floor
Order, disorder and mixing: The atomic structure of amorphous mixtures of titania and tantala
The atomic structure of mixtures of titania (TiO_2) and tantala (Ta_2O_5) ion-beam sputtered amorphous thin film coatings at various post-deposition annealing temperatures have been studied using Ta LIII and Ti K edge Extended X-ray Absorption Fine Structure (EXAFS). The results indicate that post-deposition annealing produces subtle changes in the short range order (< 1 nm) for samples which remain amorphous. We also show that titania–tantala mixtures maintain a structure similar to that of pure tantala, with the titanium atoms preferring to sit at the second shell distance, which is similar to the Ta–Ta distance seen in the pure tantala structure. A discussion is also included on interpretation of the general trends identified in the EXAFS data and how this relates to previous and ongoing studies of the structure and mechanical loss measurements of titania–tantala coatings