593 research outputs found
Velocity dependence of joint friction in robotic manipulators with gear transmissions
This paper analyses the problem of modelling joint friction in robotic manipulators with gear transmissions at joint velocities varying from close to zero until their maximum appearing values. It is shown that commonly used friction models that incorporate Coulomb, (linear) viscous and Stribeck components are inadequate to describe the friction behaviour for the full velocity range. A new friction model is proposed that relies on insights from tribological models. The basic friction model of two lubricated discs in rolling-sliding contact is used to analyse viscous friction and friction caused by asperity contacts inside gears and roller bearings of robot joint transmissions. The analysis shows different viscous friction behaviour for gears and pre-stressed bearings. The sub-models describing the viscous friction and the friction due to the asperity contacts are combined into two friction models; one for gears and one for the pre-stressed roller bearings. In this way, a new friction model [1] is developed that accurately describes the friction behaviour in the sliding regime with a minimal and physically sound parametrisation. The model is linear in the parameters that are temperature dependent, which allows to estimate these parameters during the inertia parameter identification experiments. The model, in which the Coulomb friction effect has disappeared, has the same number of parameters as the commonly used Stribeck model [2]. The model parameters are identified experimentally on a St ¨aubli RX90 industrial robot
Modelling and identification of a six axes industrial robot
This paper deals with the modelling and identification of a six axes industrial St ¨aubli RX90 robot. A non-linear finite element method is used to generate the dynamic equations of motion in a form suitable for both simulation and identification. The latter requires that the equations of motion are linear in the inertia parameters. Joint friction is described by a friction model that describes the friction behaviour in the full velocity range necessary for identification. Experimental parameter identification by means of linear least squares techniques showed to be very suited for identification of the unknown parameters, provided that the problem is properly scaled and that the influence of disturbances is sufficiently analysed and managed. An analysis of the least squares problem by means of a singular value decomposition is preferred as it not only solves the problem of rank deficiency, but it also can correctly deal with measurement noise and unmodelled dynamics
Sensor integration for robotic laser welding processes
The use of robotic laser welding is increasing among industrial applications, because of its ability to weld objects in three dimensions. Robotic laser welding involves three sub-processes: seam detection and tracking, welding process control, and weld seam inspection. Usually, for each sub-process, a separate sensory system is required. The use of separate sensory systems leads to heavy and bulky tools, in contrast to compact and light sensory systems that are needed to reach sufficient accuracy and accessibility. In the solution presented in this paper all three subprocesses are integrated in one compact multipurpose welding head. This multi-purpose tool is under development and consists of a laser welding head, with integrated sensors for seam detection and inspection, while also carrying interfaces for process control. It can provide the relative position of the tool and the work piece in three-dimensional space. Additionally, it can cope with the occurrence of sharp corners along a three-dimensional weld path, which are difficult to detect and weld with conventional equipment due to measurement errors and robot dynamics. In this paper the process of seam detection will be mainly elaborated
Efficient dynamic simulation of flexible link manipulators with PID control
For accurate simulations of the dynamic behavior of flexible manipulators the combination of a perturbation method and modal analysis is proposed. First, the vibrational motion is modeled as a first-order perturbation of a nominal rigid link motion. The vibrational motion is then described by a set of linear timevarying equations. Next, the number of degrees of freedom is reduced by applying a modal reduction technique. The proportional part of the control system is explicitly included in the modal analysis. The applicability of the method is demonstrated by simulating the controlled trajectory motion of a spatial flexible three-degree of freedom manipulator with PID control
- âŚ