50,386 research outputs found
Heat flux sensor design reduces extraneous source effects
Heat flux sensor isolates the sensor and its transmitting thermocouple from undesirable heat sources by incorporating a radiator section that forms a radiation shield between mounting cup and sensor. Bonding of the thermocouple cable to the underside of the radiator provides a conductive path to dissipate extraneous heat that might otherwise reach the sensor
Heat flux sensor assembly
Heat flux sensor assembly with proviso for heat shield to reduce radiative transfer between sensor element
Effects of ionizing radiation on CCD's
The effects of 1.2 MeV gamma radiation and 20 MeV electrons on the operational characteristics of CCDs are studied. The effects of ionizing radiation on the charge transfer efficiency, dark current, and input/output circuitry are described. The improved radiation hardness of buried channel CCDs is compared to surface channel results. Both ion implanted and epitaxial layer buried channel device results are included. The advantages of using a single thickness SiO2 gate dielectric are described. The threshold voltage shifts and surface state density changes of dry, steam, and HCl doped oxides are discussed. Recent results on the recovery times and total dose effects of high dose rate pulses of 20 MeV electrons are reported
Contemporary perspectives of the child in action: An investigation into children’s connectedness with, and contribution to, the world around them
Childcare within Australia has undergone significant reform as a result of the implementation of the nationally mandated Belonging, Being and Becoming: The Early Years Learning Framework [EYLF] (Department for Education, Employment and Workplace Relations [DEEWR]. 2009. Belonging, Being and Becoming. The Early Years Learning Framework for Australia. Canberra: Australian Government Department of Education, Employment and Workplace Relations). The EYLF articulates contemporary perspectives of the child through its principles, practices and learning outcomes. Educators are required to promote these principles, practices and learning outcomes with children aged from birth to 5 years. This paper reports the findings from a research project that sought to investigate how educators applied their understanding of learning outcome two of the EYLF (children are connected with and contribute to their world). The focus of this research was educators working with children aged two to three years within childcare centres operating on school sites, in metropolitan Western Australian. The research design was qualitative and situated within the interpretivist paradigm. Observations were used as the method for gathering data and these were analysed through a process of coding. This paper presents the observational findings of educators’ practices within learning outcome two. Composite vignettes from the voice of the child are included to present the observational findings. In centralising the voice of the child, contemporary perspectives are made explicit
Optimizing radiation dose and fractionation for the definitive treatment of locally advanced non-small cell lung cancer
Study of providing omnidirectional vibration isolation to entire space shuttle payload packages
Techniques to provide omnidirectional vibration isolation for a space shuttle payload package were investigated via a reduced-scale model. Development, design, fabrication, assembly and test evaluation of a 0.125-scale isolation model are described. Final drawings for fabricated mechanical components are identified, and prints of all drawings are included
Recommended from our members
Multi-Material Ultrasonic Consolidation
Ultrasonic consolidation (UC) is a recently developed direct metal solid freeform
fabrication process. While the process has been well-demonstrated for part fabrication in Al alloy
3003 H18, including with intricate cooling channels, some of the potential strengths of the
process have not been fully exploited. One of them is its flexibility with build materials and the
other is its suitability for fabrication of multi-material and functionally graded material parts with
enhanced functional or mechanical properties. Capitalizing on these capabilities is critical for
broadening the application range and commercial utilization of the process. In the current work,
UC was used to investigate ultrasonic bonding of a broad range of engineering materials, which
included stainless steels, Ni-base alloys, brass, Al alloys, and Al alloy composites. UC multimaterial part fabrication was examined using Al alloy 3003 as the bulk part material and the
above mentioned materials as performance enhancement materials. Studies were focused on
microstructural aspects to evaluate interface characteristics between dissimilar material layers.
The results showed that most of these materials can be successfully bonded to Al alloy 3003 and
vice versa using the ultrasonic consolidation process. Bond formation and interface
characteristics between various material combinations are discussed based on oxide layer
characteristics, material properties, and others.Mechanical Engineerin
High Accuracy Near-infrared Imaging Polarimetry with NICMOS
The findings of a nine orbit calibration plan carried out during HST Cycle
15, to fully determine the NICMOS camera 2 (2.0 micron) polarization
calibration to high accuracy, are reported. Recently Ueta et al. and Batcheldor
et al. have suggested that NICMOS possesses a residual instrumental
polarization at a level of 1.2-1.5%. This would completely inhibit the data
reduction in a number of GO programs, and hamper the ability of the instrument
to perform high accuracy polarimetry. We obtained polarimetric calibration
observations of three polarimetric standards at three spacecraft roll angles
separated by ~60deg. Combined with archival data, these observations were used
to characterize the residual instrumental polarization in order for NICMOS to
reach its full potential of accurate imaging polarimetry at p~1%. Using these
data, we place an 0.6% upper limit on the instrumental polarization and
calculate values of the parallel transmission coefficients that reproduce the
ground-based results for the polarimetric standards. The uncertainties
associated with the parallel transmission coefficients, a result of the
photometric repeatability of the observations, are seen to dominate the
accuracy of p and theta. However, the updated coefficients do allow imaging
polarimetry of targets with p~1.0% at an accuracy of +/-0.6% and +/-15deg. This
work enables a new caliber of science with HST.Comment: 13 pages, 9 figures, PASP accepte
High Accuracy Imaging Polarimetry with NICMOS
The ability of NICMOS to perform high accuracy polarimetry is currently
hampered by an uncalibrated residual instrumental polarization at a level of
1.2-1.5%. To better quantify and characterize this residual we obtained
observations of three polarimetric standard stars at three separate space-craft
roll angles. Combined with archival data, these observations were used to
characterize the residual instrumental polarization to enable NICMOS to reach
its full polarimetric potential. Using these data, we calculate values of the
parallel transmission coefficients that reproduce the ground-based results for
the polarimetric standards. The uncertainties associated with the parallel
transmission coefficients, a result of the photometric repeatability of the
observations, dominate the accuracy of p and theta. However, the new
coefficients now enable imaging polarimetry of targets with p~1.0% at an
accuracy of +/-0.6% and +/-15 degrees.Comment: 5 pages, 2 figures. Contributed talk, "Astronomical Polarimetry 2008.
Science from Small to Large Telescopes" La Malbaie, Quebec, Canada, 200
- …